These tips will carry across to ALL GARRETT ACE machines, the signal numbers are a little lower on the max, but you will get the idea about signals, and other things :-) Thanks for watching hope it helps , please SHARE if you think it might help someone you know :-)
Thanks Dawn. Actually my machine is a little older, it doesn't have the numbers screen which would be really handy, just 12 segments along the top. I hope you do a short explanation on how to test "silver" with the "foil smell test" in one of your future videos. I can't find anything on the net about it. Thanks again.
The segments are the same as the numbers the principles the same. I've done the silver test in a number of videos out in the field, cant remember which though ?
Hi, Dawn your videos are great I'm new to detecting just got a Garrett AT Max and I've followed your instructions I'm using it in custom mode as you advise I'm getting a continuous tone all the time in my headphones or on the detector it's there all the time. by turning the volume down changing the frequency or sensitivity makes no difference
Main points of the video: 1. Use the frequency with the least interference. 2. Drop your sensitivity comfortably. 3. Ground balance your detector. 4. Drop the threshold. Thanks a bunch! Just got mine yesterday. Found a few coins but it was beeping my ears off with choppy signals!
I sold my AT Max a year or so ago , and gave up detecting as my life got too busy… Then I flicking through You-Tube , and flicked you on again ..and all that excitement Ive missed came rushing back …I’ve missed you Digger Dawn and love you videos … keep up sharing ye skills luv … take care …Dave
Not all people get it. Some will never get it. You just can't get into a race car and be a race care driver. You can't buy knowledge. How many people pay the big bucks and think they are going right out there and find the hoard. I'am 40 years into it. I'am learning, relearning every time I go detecting. I have watched you Dawn, You hung in there even when it got frustrating. You up graded, had to learn some more, you worked thru it. I see you're doing your best to pass it along. Thanks
You found that sweet goldish looking coin while doing a help video as Karma for helping people. I genuinely appreciate you making this video, so helpful it is not even funny bcuz I am brand new to this and you just saved me LOADS of head aches! Love the accent too btw, I am from USA. Love ppls different dialects and again thank you for this video. Def will check more by you!
Ty, ty ,ty.... garrett needs to compensate you or sponsor you. It's been 2 years since i purchased mine, 4 day trips, 5 or 6 videos, and lots of noise. I am someone who retains information from watching more than when i study from a book or reading, so watching is how i learn. It is 4 a.m., and i had no intention of giving it another go till now, so I am gearing up for an unexpected day of detecting. Thanks for breaking it down and making it less complicated for people that learn like i do and am anxious to learn more of these important tips to this profession and hobbie.
You're a sweetheart Digger Dawn!!! Just received my AT Max from Amazon today and wanted to thank you from Washington, USA for taking the time to explain some of the features to us beginners. Now we might actually find something when we go out :-) Thanks again for the fantastic video!!!
I just got done watching reviews on the Max and was kind of surprised to see people complaining about the chattering and the other issues that you just explained how to take care of. They went as far as getting rid of their Max and all they had to do was watch your video and they would have been happy with their Max and subscribing to you. Lol. You’re awesome Dawn !
Just wanted to let ya know Dawn I ordered a 5x8 DD PROformance coil for my Ace 250. Anxiously waiting to get it and use it. Will let ya know how it works out.
I got my AT Max a couple of months ago and have been digging a lot of trash. Cutting down the noise is just what I needed, can't wait to go back out and apply what I learned from your video. Thanks from Canada
Thank you so much for this! I'm borrowing an AT Max at the moment and she's quite the chatty one. These settings and tips definitely helped cut down on the chatter and the past few digs have been much better for me. Thanks! 😊
Steve Moore should put this up on the Garrett website! It is a very well done and entertaining at the same time instructional video! Congratulations Dawn!
Thank you very much for this tremendous contribution, I know a lot but I love this hobby, a few months ago I bought this interesting detector, AT max but I still understand it very well, but I want to learn and know where to start looking and how to calibrate it in each ground, greetings and blessings
That's a helpful demo Dawn, although I'm unable now to take part in the hobby I appreciate your videos because of your willingness to pass on tips for those coming into the hobby. I started way back when machines were quite basic, but still required time to get to know the different sounds. thanks for sharing.
Thanks Derrick, Ive always thought as long as you know a machine really really well you will get the most out of it, I dont know how people manage when they are swapping machines every couple of months,
Just bought an AT Max, will take your advice on the settings as from all the videos, yours are in terms i can understand. Subscribed too, keep up the good work.
Thanks for the sub :-) I always try to explain things simply, no point trying to be over technical no ones knows what you mean, I remember that from when I started detecting :-)
Thanks Dawn, had the Max now for about two months and was wondering how to cut out some of the chatter. Very educational indeed, the soil is very mineralised her in Aussie where we detect and my next goal is to find the best setting for my custom setting.
Thank you for the instructional video, I learned a thing or two about chatter on the AT MAX. I saw you wearing a search coil pendent, where did you get that? I’ve been looking for that pendent with no success. Thank you.
A guy in the USA who is a silver smith made it. Hes called Rockcyclelapidary on instagram and on FB as well as Warren Kruger. Message him, he makes all types of coils :-)
@@DiggerDawn It will definitely pick up fast. RUclips is the second largest search engine after Google. Give it a few hours and anyone searching for AT MAX Settings will find it. I hope Garrett are sharing your vids. You are a fantastic brand ambassador for them and for the hobby in general :)
@@DiggerDawn Seems to be a lot of confusion about the AT Max especially on how it works on the wet sand. Many people have complained that they cannot get it to settle, which is a shame because in all other respects it seems to be a fine machine. I take it you don't get to the beach much Dawn?
Hey lady, thanks. I’m going to grab my Nel Attack cool back out and try this out. I had tried adjusting the sensitivity. I believe my problem is definitely fixable now!
You didn't do the silver dance :)..... It's nice to see someone who hasn't fallen for the Minelab and XP hype. Also, despite the claims made by a lot of detectorists, you don't need an expensive pair of headphones.
I dont tell to follow the crowd i never have, I think the key is understanding your machine whatever it may be :-) no you dont need expensive headphones, but headphones make the sound on the max completely different
yeah it is different hope the video helps the only thing i didnt include was the factory reset after a coil change or if its playing up, but you will know that already have the AT pro
Hello good afternoon dawn just bought an at max yeah just watched your tutorial much easier than the one from Garrett went to some beaches yesterday tried max on one beach then my 1235x Fischer which I have used for 22yrs after watching your video great explanation so today I'm going out again with max so excited thanks again happy hunting 🤗😎
Great Video Ma’am. I would recommend not hitting the coil on the ground during Ground Balancing efforts. Just my opinion from the last 20 years of MD’n. However, excellent video! Probably the most informational video on YT! Ty, Mrs. Dawn
loved the video dawn.i have a makro racer and your explanition of high 90s being deep iron is true.everytime i dig over 90 its deep iron..great double silver.loved the vid and learned some tips from it.
Great vid for beginners. I agree you can turn the sensitivity down to quiet the machine when you first start out or if it's chatty but, you will miss deep or small targets. Luck had it that you were swinging over two silver coins 2 inches down. You could have turned the sensitivity all the way down and heard those...lol You can always turn the sensitivity up if you hear something like a faint target to get a better signal and turn it back down when you move on.
@@DiggerDawn Yeah it was going bananas one day. I tried everything from changing the coil, the batteries, the frequency, the sensitivity. I even reset it to factory settings a few times. I think is back to normal now haha
After 35 years of digging, you hit it pretty good"🤸♂️🤸♂️🤸♂️ Nice.......You should of seen them old machines 🙉 and no pin-pointers 🥕 We used the edge of the coil, still do sometimes ...Until next time
thanks thats a good compliment, i dont know everything, but i like to share what works for me. Yeah theres people today refuse to get a pinpointer, we are all spoiled with technology nowadays :-)
Thanks for the info Dawn, i just used my brand new AT MAX on a western Australia beach, single straight away it was two pieces of silver foil, ah well it gave me a chance to get used to the machine.
Nice one Dawn. Simple basics to get you on your way.... Have you tried the beach with it? Omg it's a headache at times, but a tweak here n there and it settles. I've noticed that the volume button is a very handy option, especially when there's so much chatter - the real tones come through clearer for me on the beach when I have volume right up - the chatter stays the same... I found that to be a help and good guide to spotting false signals. Like you say, we all have our methods. It's trial and error. Blimey though dawn. 2 silvers in one hole whilst doing a demo - what you stand in eh?! Lol. Anyway, looking forward to meeting you at detectival 👍 Whoop Whoop 👍 would like some pics of the whole gang at some point at the regton stand with Nigel and Marcus. Really looking forward to it. I witnessed the mini spring detectival hoard...... Can it happen again? .... Oh I hope so....... Time will tell eh 🤞
Good vid Dawn! I own a Max and a Pro. This has helped a tremendous amount. Thank you so much. You rock Dawn! Love your channel so much as it keeps me in the hobby. Again thank you!
Very informative, thank you. I am looking to buy a new machine so this has been very helpful. Something I always do, as a responsible 'digger' is always carry a bag to put rubbish in as you find it :)
@UC5byIpTchSgPqSF1UH0X2xQ why not go for an ACE 400i, its got vdi numbers, iron audio etc and if you put a bigger coil on it you will have an awesome machine
Great video dawn I fully agree with use the tones and the vdi as a secondary. But obviously when you start it is a huge help. I use the at pro just with the slightly smaller nel hunter coil from our friends at regtons super fast delivery and great service. Keep up the fantastic videos I’ll hopefully get too meet you one day at a event. Take care dean
Digger Dawn sadly not my boss is away that week as my luck would have it. But I’ll be booking in early for next year too save same happening for next year. So if not before I’ll catch up with yourself then with stroke of luck. Keep up the fantastic videos dawn I’m subscribed too RUclips and on your fb page. Take care dawn
No silver dance?? Great how to video.. although I have a Minelab after watching this. I feel confident I could use a Garrett at.. keep up the good work
Good job Dawn. See, i learned something everytime i watched! Congrats on the silver coin spill! I'd dig the spoon signal too because buttons also ring up in that range too! HH!!
I’ve been doing so well since watching this video, thank you. I’ve found a bunch of jewelry in the past month but only 1 gold and 1 silver ring, which is amazing. What does gold usually ring up on the at max? What numbers should I discriminate up to 33-35? Or can gold ever ring up in the low 30s? Thanks
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
These tips will carry across to ALL GARRETT ACE machines, the signal numbers are a little lower on the max, but you will get the idea about signals, and other things :-) Thanks for watching hope it helps , please SHARE if you think it might help someone you know :-)
Thanks Dawn. Actually my machine is a little older, it doesn't have the numbers screen which would be really handy, just 12 segments along the top.
I hope you do a short explanation on how to test "silver" with the "foil smell test" in one of your future videos. I can't find anything on the net about it. Thanks again.
The segments are the same as the numbers the principles the same. I've done the silver test in a number of videos out in the field, cant remember which though ?
I AM GOING TO GET A DETECTOR SOON. ANDY ENGLAND 🇬🇧
Hi, Dawn your videos are great I'm new to detecting just got a Garrett AT Max and I've followed your instructions I'm using it in custom mode as you advise I'm getting a continuous tone all the time in my headphones or on the detector it's there all the time. by turning the volume down changing the frequency or sensitivity makes no difference
Have you got the threshold turned up? Put it on minus 4
Main points of the video:
1. Use the frequency with the least interference.
2. Drop your sensitivity comfortably.
3. Ground balance your detector.
4. Drop the threshold.
Thanks a bunch! Just got mine yesterday. Found a few coins but it was beeping my ears off with choppy signals!
Good luck!
I sold my AT Max a year or so ago , and gave up detecting as my life got too busy…
Then I flicking through You-Tube , and flicked you on again ..and all that excitement Ive missed came rushing back …I’ve missed you Digger Dawn and love you videos … keep up sharing ye skills luv … take care …Dave
Not all people get it. Some will never get it. You just can't get into a race car and be a race care driver. You can't buy knowledge. How many people pay the big bucks and think they are going right out there and find the hoard. I'am 40 years into it. I'am learning, relearning every time I go detecting. I have watched you Dawn, You hung in there even when it got frustrating. You up graded, had to learn some more, you worked thru it. I see you're doing your best to pass it along. Thanks
Yeah I still dont know a lot but what I do know I can share, you're right every hunt you learn a little more, that is unless you're a know it all, 😂😂😂
You found that sweet goldish looking coin while doing a help video as Karma for helping people. I genuinely appreciate you making this video, so helpful it is not even funny bcuz I am brand new to this and you just saved me LOADS of head aches! Love the accent too btw, I am from USA. Love ppls different dialects and again thank you for this video. Def will check more by you!
You are so welcome
I sold my AT Max for the tried and true AT Pro and could not be happier. Newer is not always better.
The max does take some getting used to, I love mine
I'm considering it.....
Your energy is contagious, thanks. I just bought the Max this week.
Thank you Dawn, I was ready to bin my max but this video has sorted it out.
Great I'm glad it helped
I just bought an AT MAX, this video helped me more than anything I found and I was so happy to see you found two silver coins!
Oh I am pleased, Ive found LOTS of silver coins with the MAX, stick with it and it will just click :-)
Ty, ty ,ty.... garrett needs to compensate you or sponsor you. It's been 2 years since i purchased mine, 4 day trips, 5 or 6 videos, and lots of noise. I am someone who retains information from watching more than when i study from a book or reading, so watching is how i learn. It is 4 a.m., and i had no intention of giving it another go till now, so I am gearing up for an unexpected day of detecting. Thanks for breaking it down and making it less complicated for people that learn like i do and am anxious to learn more of these important tips to this profession and hobbie.
Thanks im part of the Garrett field team :-)
I'd like to believe you were blessed by helping people.
Thanks my day job is a teacher so I do like helping people achieve :-)
Very helpful. Just what I was looking for. The screen was hard to see sometimes but overall the video was great. Will be using soon.
Glad it helped
You're a sweetheart Digger Dawn!!! Just received my AT Max from Amazon today and wanted to thank you from Washington, USA for taking the time to explain some of the features to us beginners. Now we might actually find something when we go out :-) Thanks again for the fantastic video!!!
Good luck with it.... give it some time to learn
I just got done watching reviews on the Max and was kind of surprised to see people complaining about the chattering and the other issues that you just explained how to take care of. They went as far as getting rid of their Max and all they had to do was watch your video and they would have been happy with their Max and subscribing to you. Lol. You’re awesome Dawn !
Some people would rather moan than take advice haha
Just wanted to let ya know Dawn I ordered a 5x8 DD PROformance coil for my Ace 250. Anxiously waiting to get it and use it. Will let ya know how it works out.
Top
I got my AT Max a couple of months ago and have been digging a lot of trash. Cutting down the noise is just what I needed, can't wait to go back out and apply what I learned from your video. Thanks from Canada
Top !
Thank you so much for this! I'm borrowing an AT Max at the moment and she's quite the chatty one. These settings and tips definitely helped cut down on the chatter and the past few digs have been much better for me. Thanks! 😊
Glad it was helpful!
Top !
Steve Moore should put this up on the Garrett website! It is a very well done and entertaining at the same time instructional video! Congratulations Dawn!
aww thanks Greg, is the machine the same as the american version
Thank you very much for this tremendous contribution, I know a lot but I love this hobby, a few months ago I bought this interesting detector, AT max but I still understand it very well, but I want to learn and know where to start looking and how to calibrate it in each ground, greetings and blessings
Most useful advice on AT Max found so far, many thanks
Thanks Steve
That's a helpful demo Dawn, although I'm unable now to take part in the hobby I appreciate your videos because of your willingness to pass on tips for those coming into the hobby. I started way back when machines were quite basic, but still required time to get to know the different sounds. thanks for sharing.
Thanks Derrick, Ive always thought as long as you know a machine really really well you will get the most out of it, I dont know how people manage when they are swapping machines every couple of months,
Top !
Just bought an AT Max, will take your advice on the settings as from all the videos, yours are in terms i can understand. Subscribed too, keep up the good work.
Thanks for the sub :-) I always try to explain things simply, no point trying to be over technical no ones knows what you mean, I remember that from when I started detecting :-)
Top !
Thanks Dawn, had the Max now for about two months and was wondering how to cut out some of the chatter. Very educational indeed, the soil is very mineralised her in Aussie where we detect and my next goal is to find the best setting for my custom setting.
good well i hope this have helped, i heard the soil is very mineralised in Oz
@@DiggerDawn In some of the old gold fields the ground is so mineralised my garrett is as chattery as the Mrs after a night on the wine. :)
Top !
Thank you for the instructional video, I learned a thing or two about chatter on the AT MAX. I saw you wearing a search coil pendent, where did you get that? I’ve been looking for that pendent with no success. Thank you.
A guy in the USA who is a silver smith made it. Hes called Rockcyclelapidary on instagram and on FB as well as Warren Kruger. Message him, he makes all types of coils :-)
Thanks Digger Dawn, great info for us beginners.
Glad to help
Mrs. Digger, I love your English and ascent. Also, your personality. Thanks for your video.
Your advice fixed the issues I was having. Thank you so much Dawn!
I'm so glad! Happy to help
Top !
I was watching your intro and noticed the cable for your coil is wrong. The instructions say for the cable to go over the tube. Thanks for the tips.
Brilliant video Dawn. So many new detectorists coming into the hobby at the moment and videos like this are a massive help. Your a star ⭐⭐⭐
well I hope it helps, its running as the slowest viewed video at the minute, but I know it will gain legs over time :-)
@@DiggerDawn It will definitely pick up fast. RUclips is the second largest search engine after Google. Give it a few hours and anyone searching for AT MAX Settings will find it. I hope Garrett are sharing your vids. You are a fantastic brand ambassador for them and for the hobby in general :)
theres not many videos like this on the at max i did a good search
@@DiggerDawn Seems to be a lot of confusion about the AT Max especially on how it works on the wet sand. Many people have complained that they cannot get it to settle, which is a shame because in all other respects it seems to be a fine machine. I take it you don't get to the beach much Dawn?
I think its probably the sensitivity too high in most cases
Hey lady, thanks. I’m going to grab my Nel Attack cool back out and try this out. I had tried adjusting the sensitivity. I believe my problem is definitely fixable now!
yeah you should, i noticed mine went more sensitive with the nel coil on, good luck you will have to let me know how you get on :-)
You didn't do the silver dance :)..... It's nice to see someone who hasn't fallen for the Minelab
and XP hype. Also, despite the claims made by a lot of detectorists, you don't need an expensive
pair of headphones.
I dont tell to follow the crowd i never have, I think the key is understanding your machine whatever it may be :-) no you dont need expensive headphones, but headphones make the sound on the max completely different
My Mat arrived today and this video sure helped. Now the fun begins. Going from a pro to a max should be interesting.
yeah it is different hope the video helps the only thing i didnt include was the factory reset after a coil change or if its playing up, but you will know that already have the AT pro
Hello good afternoon dawn just bought an at max yeah just watched your tutorial much easier than the one from Garrett went to some beaches yesterday tried max on one beach then my 1235x Fischer which I have used for 22yrs after watching your video great explanation so today I'm going out again with max so excited thanks again happy hunting 🤗😎
Great Video Ma’am. I would recommend not hitting the coil on the ground during Ground Balancing efforts. Just my opinion from the last 20 years of MD’n. However, excellent video! Probably the most informational video on YT!
Ty,
Mrs. Dawn
Ok thanks!
loved the video dawn.i have a makro racer and your explanition of high 90s being deep iron is true.everytime i dig over 90 its deep iron..great double silver.loved the vid and learned some tips from it.
Oh that's fab, I know it will make sense to garrett users but if its helping across brands that's made my night. Thanks for commenting
Great vid for beginners. I agree you can turn the sensitivity down to quiet the machine when you first start out or if it's chatty but, you will miss deep or small targets. Luck had it that you were swinging over two silver coins 2 inches down. You could have turned the sensitivity all the way down and heard those...lol You can always turn the sensitivity up if you hear something like a faint target to get a better signal and turn it back down when you move on.
I've made this for beginners to get them going :-)
This helped out so much! My max had just started all the crazy chattering. In had to turn it down a bit . Thanks!! And awesome silvers!!!
yeah and try changing your frequency if theres crazy going on, you never know whats in your field
@@DiggerDawn Yeah it was going bananas one day. I tried everything from changing the coil, the batteries, the frequency, the sensitivity. I even reset it to factory settings a few times. I think is back to normal now haha
Great stuff Dawn glad you had an amazing time out in the field thanks for sharing
Thank you Dawn! This will help me tremendously!
Im pleased if you have any more questions please ask :-)
After 35 years of digging, you hit it pretty good"🤸♂️🤸♂️🤸♂️ Nice.......You should of seen them old machines 🙉 and no pin-pointers 🥕 We used the edge of the coil, still do sometimes ...Until next time
thanks thats a good compliment, i dont know everything, but i like to share what works for me. Yeah theres people today refuse to get a pinpointer, we are all spoiled with technology nowadays :-)
Straight forward and to the point! Good stuff, thank you!
Very helpful thank you so much! I just ordered the AT Max a couple days ago and it’s coming today😀 thanks for the head start 👍🏼
You are so welcome!
Thanks for the info Dawn, i just used my brand new AT MAX on a western Australia beach, single straight away it was two pieces of silver foil, ah well it gave me a chance to get used to the machine.
Thank you for this instructional video, it was very helpful!
Glad it was helpful!
Nice one Dawn. Simple basics to get you on your way.... Have you tried the beach with it? Omg it's a headache at times, but a tweak here n there and it settles. I've noticed that the volume button is a very handy option, especially when there's so much chatter - the real tones come through clearer for me on the beach when I have volume right up - the chatter stays the same... I found that to be a help and good guide to spotting false signals. Like you say, we all have our methods. It's trial and error. Blimey though dawn. 2 silvers in one hole whilst doing a demo - what you stand in eh?! Lol.
Anyway, looking forward to meeting you at detectival 👍 Whoop Whoop 👍 would like some pics of the whole gang at some point at the regton stand with Nigel and Marcus. Really looking forward to it.
I witnessed the mini spring detectival hoard...... Can it happen again? .... Oh I hope so....... Time will tell eh 🤞
Thank you, I have been having some of these issues and no one was able to help me!
Oh great hope its helped :-)
Hi Dawn, As an "old" newbie, I found this information to be a very good start to using my new AT Max.... Thanks Dawn, very much appreciated... ;-)
Good tip about the mobile phones. My ace 250 hated my phone until I put in plane mode.
yeah it does cause problems for some people, i know it has me in the past too
Thanks a lot all the way from Michigan! About to put your tips to the test!
Good luck!
Good vid Dawn! I own a Max and a Pro. This has helped a tremendous amount. Thank you so much. You rock Dawn! Love your channel so much as it keeps me in the hobby. Again thank you!
ahh thats great, it makes the video worth making when someone gets use of it :-)
Perfect instructional video! But I love that necklace pendant the most!!!! @LOVE!@
Thank you!!
Great job showing us how you use your Machine and great finds.
I have so many people ask me, I thought it only right I make a help video :-)
Thanks for the tips, Dawn. Love your video's. They always bring a much needed smile. Big hug from Milwaukee, Wisconsin :)
Thanks for a great video I had just gotten a at Max this will help a lot
Excellent tips Dawn. The Max is an awesome machine.
Hi yes it is if its used correctly
Nice video dawn. I have an at pro and now that the snow is finally gone I’ll be digging 👍🇨🇦
Thanks for the info. I have a Garrett AT Pro & thinking of getting the AT Max
well I hope this helps, a lot of people struggle with the chatter
I finally have the max. This video is by far the best that has explained the best way to use it. Thanks miss diggy dawn. Ps. Love watching your videos
Thanks Devo, stick with it the max is a great machine
Thanks for sharing. Great tips. I am going to try this out with my new max. 👍
Very helpful information of the setting and machine thanks for sharing and congrats on your excellent finds.
Thanks Im glad its helped :-)
Great video Dawn, it's really going to help me get used to my Max! Thank you 🙏😁
Great stuff I'm really glad I was able to help :-)
Great Video Dawn and Congratulations on the 2 Silvers! The Garrett AT MAX is an Excellent all around machine... Highly Recommended!
Really enjoyed watching DD
Great lesson & nice fines 👍
Thks for sharing 🤜🏻🤛🏻
Very informative, thank you. I am looking to buy a new machine so this has been very helpful. Something I always do, as a responsible 'digger' is always carry a bag to put rubbish in as you find it :)
thats what everyone should do, i have a rubbish zip in my bag (the big bit) and another zip for my coins and nice things (the small bit) haha
Top !
Just found your channel and subscribed instantly! Thanks! :-)
Thanks very much appreciated 😁😁😁
Hi Dawn, just subbed, I've finally got an AT max, been watching and enjoying your video s, look forward to learning more from you, take care Martin
Awesome! Thank you!
Top tips there Dawn and very well presented, nice finds too lol
Thanks Andrew
I am heading out for some old silver in a couple of days. Keep up the good digs.
Good luck :-)
Fabulous video. Thank you for taking the time to make this. Very informative. Have a wonderful weekend. :)
Thanks I hope it helps people :-)
Great Job Dawn!! Love ya Dear! From U.S.A.
Thanks Jarhead :-)
Great Instructional video. You are right...it is all about karma! Do good and good will come back to you.
Thanks I believe karma comes to you, i really do
Merci à toi mademoiselle ❤from morroco
Brilliant content
Don't forget to take that lovely dog with you for luck!
Best of luck paul
weathers always wrong for him or im hunting on a doggy school day where he goes to play with his friends
Unfortunately I couldn’t get on with the Garrett dawn I sold it and got a vanquish 440 and 540 which I find great but I still watch with interest
Very helpful video Dawn nice finds
Thanks Lloyd :-)
Subscribed. Thank you for some fun and positive videos!
❤ your slang when you get excited, I’m Texan and have my own slang as well lol 🍻
Love it!! i have a language of my own
Found your channel from across the pond this morning... not a fan of the max but a fan of the hobby and a new subscriber to your channel...hh
Thanks for sharing your experience!
Great Tips Dawn 👍👍🥳🥳
Thanks hope they help :-)
Thank you Dawn for this Video it was great Hugs to you over across the big lake
Thanks love the hug :-)
That was worth the watch. ❤
Hello 👋... I am thinking about buying a Garrett AT Max so this is very helpful... but they are very expensive 😭
What machine have you got now?
Digger Dawn a Garrett ace 200i...and I am thinking of upgrading it.
@UC5byIpTchSgPqSF1UH0X2xQ why not go for an ACE 400i, its got vdi numbers, iron audio etc and if you put a bigger coil on it you will have an awesome machine
Thank you so much for the advice !!
anytime :-)
Dawn ,friendly advise as if having a chat.Thanks for the effort Cheers
Great video dawn I fully agree with use the tones and the vdi as a secondary. But obviously when you start it is a huge help. I use the at pro just with the slightly smaller nel hunter coil from our friends at regtons super fast delivery and great service. Keep up the fantastic videos I’ll hopefully get too meet you one day at a event. Take care dean
Hi Dean, yeah too much weight is put on numbers rather than sound, but to get started it gives confidence :-) are you going to Detectival this year?
Digger Dawn sadly not my boss is away that week as my luck would have it. But I’ll be booking in early for next year too save same happening for next year. So if not before I’ll catch up with yourself then with stroke of luck. Keep up the fantastic videos dawn I’m subscribed too RUclips and on your fb page. Take care dawn
aww thats a shame, well i go to detectival every year and im getting a bit more travel friendly, hope we meet up soon :-)
Top
No silver dance?? Great how to video.. although I have a Minelab after watching this. I feel confident I could use a Garrett at.. keep up the good work
thanks I did actually make a dig video of this dat without the help bits, the dances are in that and yep theres 3 :-)
Hello Dawn...love your vids...quick question...what coil are ya using?...doesn't look like the stock...maybe Nel?
Hi yes it's a NEL tornado I'm using
@@DiggerDawn Thank You...Happy Diggin!
Very nice and informative video, for sure very helpful for all AT Max users. 😀
But as someone that knows the value of worn odern British coins I know it doesn't matter.
I’ve waited a long time to hear you say “Me Gold”!Lol
I found a 22ct gold ring a couple of weeks ago, i said me ring many times haha
Great video, thanks for posting!
Thanks so much. This is very valuable to me.
Good job Dawn. See, i learned something everytime i watched! Congrats on the silver coin spill! I'd dig the spoon signal too because buttons also ring up in that range too! HH!!
Hi yeah I always call that the definitely something signal buttons. Artifacts, cap badges spoon haha
Great tuition video Dawn, two silvers in the hole! You jammy bugger! 😂🤣 Keep up the good work!
I know I cant stop finding them!!
Another great video. Thank you for sharing. Happy Hunting Everyone 👊🏻😎👍🏻
Well done on the double Silver
Thanks its the last thing I expected to see haha
my life is not complete !!! you did not silver dance !! great tips . cheers dawn take care
I did actually make a dig video of this dat without the help bits, the dances are in that and yep theres 3 :-)
@@DiggerDawn woop woop !!!
I’ve been doing so well since watching this video, thank you. I’ve found a bunch of jewelry in the past month but only 1 gold and 1 silver ring, which is amazing. What does gold usually ring up on the at max? What numbers should I discriminate up to 33-35? Or can gold ever ring up in the low 30s? Thanks
I've got a gold test video if you search it, glad you're enjoying your max
Lol what luck well done dawn ,thx for the info on maxi I've found it very useful ,keep up the great work 👍👍
ah good thanks Im glad its helped
Great help. Thanks
My first vid I love you! Amazing.
Yay! Thank you!
I like your videos better. Your's is more believable. You do not keep finding old coins every time you dig.
I would like to watch more of your videos.