BMPCC4k IR-cut Filter Replacement
HTML-код
- Опубликовано: 7 сен 2024
- Step by step video on how to replace your original contaminated IR cut filter,
I will not be responsible for any damage that has been done by following this tutorial.
SEBrosius video: • #RawLite #OLPF #Pocket...
ICF from Ebay: tinyurl.com/bm...
seller name: tangsinuo
Much gratitude for your instructional video! I thought I had a $1250 paper weight because of IR Cut filter fungus! You saved the day! Kudos to you!
By the way, thanks to the uploader. Much respect and appreciation for helping all of us out. My old ir cut filter looked like a Petri dish
Thanks a lot, did you manage to replace yours ? My replacement also got corrosion
@@n1xen corrosion? What happened to it? Literally just replaced it. Turned on the camera and I couldn't see anything abnormal on the screen. But I'll see how it goes. I put it in a dry cabinet to hopefully protect it. I bought the same IR cut filter from the same guy only a few weeks ago so I hope it had the coating on it. What did you do in the end when the replacement got corrosion? Any idea how it happened? Sorry for all the questions! Just eager to know how others got on
@@samjarmin @Andrew Gevers curious to know as well.. My bmpcc 4k ir cut filter has small spots in the middle (Corrosion?) I had always stored cam with silica gel and never remove/replace the lens (olumpus 12-100 pro), Would like to know experience on coated one, or.. is it just better to go to rawlite (I know its expensive!) 😞
@@nxcolor go raw light if you want. I got mine from the same place as this RUclipsr - some shop on Etsy/AliExpress. I used to store mine with lens attached (Olympus 12-40) and silica gel , but literally did nothing to protect it. If the humidity is high enough the silica won't make much of a difference. I really recommend dry cabinets - they are cheap on Amazon. You can see if you can clean the spots off yours - maybe you can save it. If. It then you'll need to replace it one way or another
@@samjarmin Hi how's your replacement filter's condition so far? Any fungus or corrosion after storing it in dry cabinet?
You saved me 220 USD. I spent just 30 usd fixing on my own.
Thank you for the video. I just replaced mine on one that was corroded. I hope the new one lasts a while.
Thanks, did it today.
VENDEN SENSORES PARA BLACK MAGIC 6G E7D5A4D4 PARA LIMA PERU , PPORFAVOR ESTARE AGRADECIDO,Blackmagic Pocket Cinema Camera 6K G2 , FABRICANTE : Blackmagic Design Inc , VERSION DE FIRMAWARE : 7.9 , NUMERO DE SERIE : E7D5A4D4 , Hola mi estimado Cómo estás Que tengas un buen día Saludos desde Lima Perú Mi nombre es José Penachi y tengo una Black Magic G2 el sensor de mi black muerta o sea ya no funciona porque lo cayó láser hay alguna reparación? HAY cambio de sensor se puede hacer algo o sea todo funciona toda la cámara normal hace todo su función la única es que el sensor está dañado o sea no hay imagen no hay nada Cómo me puedo poner en contacto contigo Espero tu mensaje muchas gracias
I can't find that particular adhesive or glue anywhere, can someone help me or point me in the right direction, any help would be appreciated thank you.
Just to add a comment - before doing this, grab a glass cleaner cloth, this is great for removing excess residue, much better than even the softest swabs. Other items just smear the silicone around . The glass cleaner cloth will remove it.
im using the glass cleaner cloth and its still smearing/hard to get off. but it only on the edges though
@@djmx9237 the glass cleaner does take a bit of time, but it works only on light smudges after all the thicker smudge and residue is cleaned off, so maybe a nonfluffy soft tissue would help to soak up excess silicone before the glass cleaner can finish off the remaining stuff the tissue can't get
@@samjarmin okay, thanks for your reply. im almost done cleaning it. now I wait 24 hours and put it back in my camera
@@djmx9237 read the silicone bottle, it might be quicker - the silicone I used dried in ten minutes so I waited and put it back in, that also ensures that there's no wasted time with the sensor exposed
@@samjarmin Thanks that so true. mine dries in 15 minutes and dries fully in 24 hours. I'll put it back in soon. Thanks so much for your replies and help
you don't have to take out so many parts
Hello nice video, I just did this yesterday, and now, my camera have a warm look, so you had this problem too? I got the AR COATED TYPE IR CUT FILTER on ebay
Hello!! Did you solve the problem?
Thank you so much for this!
I have a speck of dust stuck on the sensor (THE sensor behind the IR filter) and I'm really scared to clean it, and not sure with what to clean that one freakin dust. Any advice?
Thank you for the video! What size Phillips head screw driver did you use?
Hello, thanks for the video, it is very helpful! I searched all over the web and I can't find another video like this. BUT no one comments on how it worked after it was installed. Your opinion will be greatly appreciated! Salut!
Sorry for the late reply, it worked just the same as the original IR filter....but maybe too much the same Today I discovered that the new glass isnalso contaminated... same bubbles effect on the glass...im pretty pissed about it. As i keep my camera in a airtight box with anti moist pads... so now i dont know what my other option is... either send it back to bmd or try out the rawlite filters which all cost around 500$
But yes the first few weeks after I replaced the glass it was perfect, like the original.
@@n1xen was it the coated version you bought or the non coated. or this option did exist when you were buying yours?
@@djmx9237 I didn't have that options at the time 😔
@@n1xen Im just about to order from the same seller who now has a coated version as an option. I hope it is more durable than the normal as it says on his information page
thanks sussesfuly have changed
Hello, good tip brother!
Where can I buy that filter for my BMPCC 4k?
Thanks.
were can i buy one of this filters? i need a replacement! HELP!
Great video..thanks
I had big matter withe my Bmpcc 4 k, it touche don’ t work
Can I use Silicone Gasket Maker?
👏👏👏👏👏👏👏👏Hello, could you indicate the link of the wrench kit that you are using to change the filter.?
A tool set like this would do fine:
www.amazon.com/STREBITO-Screwdriver-142-Piece-Electronics-Precision/dp/B08SGM6F79/ref=mp_s_a_1_2_sspa?crid=2LQAHLGMGRSXE&keywords=screwdriver+set&qid=1674436233&sprefix=screw%2Caps%2C201&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzQk8xSlFTTlpaMUFJJmVuY3J5cHRlZElkPUEwODYyNTAwMkhYUEE2TlNORkdZUCZlbmNyeXB0ZWRBZElkPUEwMjYxNjcwMUlINDlCSVkySkk2NiZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
@@n1xen 👏👏👏👏👏👏👏👏
What kind of blower did you use? Im doing mine right now 😬
i used a regular blow dryer, worked great!
Can I also do this on my BMPCC 6K ? Removing my IR CUT FILTER because it's broken.
Seller is also the same from ebay
I need also
I got one from tangsinuo and had some very ugly glares and lens flares in the center of my lens. Did u notice something weird or your filter was exactly like the original?
yeah theres is basicaly no QC on these things, you just have to roll the dices and hope you dont get a dud. Best of luck!
looks a shitload easier than doing this to the sony a7iv.. good god i'd have a nervous breakdown for that one.
Hello sir
i need ir cut filter for bmpcc 6k camera ! Can you help me ?
What type of glue do you recommend? Is glass glue useful?
u can use UV glue and UV light, which can dry fast
uffffff thanks so much
How does it work?
My filter has burnt out twice now. Had to replace it every time.
Anybody know the cause of this? I might be missing something here.
Same here, It corroded(burnt out?) 3 days after I bought the camera. When I checked the filter on the first day it was all good. Are you using external power bank for you BMPCC? ,
is it okay to use super glue?
i would strongly suggest a silicone based glue, easy to get it off if you need to replace it again, as these things are terrible quality.
Does this work the same for the Pocket 6k?
There’s a tutorial on here and yes. It’s basically the same except the 6k has an extra screw that holds the filter from the top.
Hello man, thank you for posting this video ! I have the same problem on my BMPCC4k and as I live in Africa, it's very complicated to send my cam to Blak Magic design. So I will do this too on my cam... But I am a bit nervous to do it, I admit. Do we need to make it in a professional special clean room or it's ok ? Cause there is always some dust in the air, so I am not sure. When we take off the IR filter is it dangerous for the sensor?
Thank you for you anwser.
Regards
Hey so my room isn't dust proof either but i managed, it was my first time doing it and i was nervous too. I just made sure to use a dust blower when I installed the filter back. Makensure you sensor is covered at all times
Thank you for your response Andrew ! I am waiting for my filter, then I will do it ! Thanks again for this amazing tuto, I am sure it will help a lot of people ! Cheers
@@walkincities3137 how did it go? im about to order mine as well. im in Nigeria btw
You are my best friend ...as I am facing same problem ..I can't send my bmpcc6k to Singapore from india
Hey good day guys. Thanks for the feedback. I’m also in Ghana and facing the same issue with my BMPCC 4K. My question is which exact IR cut filter should I buy for my camera. Which one did u order? I opened mine and cleaned it . It’s better but still needs replacement. How do I get the exact one that the camera was made with.? Thanks
So many people asking where to buy. NO ANSWERS 😞. Makes this video pointless.
Link in the description...