Thank you bro, you helped me alot. At first it didn't work but after restarting did the same thing again. This time I tried a different ip address and it worked. Just change the last digits.
Not sure if your still streaming content will look but found this use full and give it a try to log into my D-Link switch that its been giving me a headaches. I managed once by i don't know how but exited and cant duplicate it. Wish me luck lol subscribed
Thank you for the vid. Just one question: my alternative DNS Servers adress is in hexadecimals, and I can't insert it for IPv4. Is it a problem to only have 1?
i have cctv dvr and i need static ip . because every time internet modem shuts down the ip changes into another ( because its dynamic ,i guess) .if i follow the steps from your video i am gonna make a static ip for the reason which i want for ?
If you use DNS server from your ipconfig then you'll use your router as DNS server, which in most cases would be your ISP's DNS, i.e. Comcast, Time Warner, etc.
Thanks for this. It worked for me but with two wobbles: The command screen on his PC shows two DNS server addresses. Mine only showed one. To over come this I did what he said and Googled "Open DNS Server" addresses for BT (my ISP). They came up and I used them. Secondly when I exited a warning appeared saying "Multiple default gateways are intended to provide ...... etc". It asked if I wanted to save anyway and I did. The trouble shooter then said all was OK. After all this, everything appears to be OK. Not sure if the warning will come back and bite me sometime. If it does I shall just revert to automatic IP address. Regards, John
Thanks for the video but honestly if someone is going to configure static ip address you surely shouldn't have to explain how to move and re-size a window. lol
Can you please help me with my issue??? I am trying this on windows 10 and im following your tutorial WORD for WORD and when I get to the part where you said to enter a new ip at the end that your other stuff couldnt reach. I do that and it tells me thats not a valid ip. if I try ANYTHING except what the ip address is supposed to be it says its not valid.
the problem i encountered was that i wasnt able to connect to internet after configuring static ip. so what I had to do was close the properties window after configuring AND disable/enable the connection by right clicking your connection in the network connections window
WAN IP address and LAN IP address cannot be in a same subnet. Please input another IP address." Even though I'm using an ip address that's not in my router's range
Thanks for the video but do you have any video of planning and preparing for the installation of an enterprise router? I hope you answer this and thank you in advance :)
If your computer is sharing resources with other systems, a static IP makes it easier to identify your computer on the network and to set up persistent connections. Also, if you are logging in remotely with Remote Desktop from another location you want a static IP address so that the connection can be forwarded through your router to the right PC. Port forwarding in such instances is to a specific IP address, so you want the PC to have a static IP, preventing forwarding to an unused, or (worse) to the wrong PC if there are others connected to your router.
@@yourwindowsguru I just changed my IP to a static one, after detecting for errors popped up it said "DNS server unreachable" or something like that, but the internet is working fine.
I followed this step by step, and now I have no internet on my computer. Now it's doing a SYSTEM RESTORE, and I am seething with UNHERALDED PURE RAGE. OH AND IT FAILED. Now how Am I supposed to fix this?
I've Set my Windows 10 PC into static wherein I've installed handycafe for our internet cafe. But everyday It keeps changing my IP address and result is all my client PC's that I pointed their IP Address to Server cant be detected. please help.
though i press validate settings upon exit ... oncec i go away from there and again i open it it still shows validate settings box not clicked and then even dhcp is not enabed when i enter ip on my own when i enable dhcp using obtain ip address it says ethernet does not have a valiod ip config. and when i enter ip it says dhcp disabled.... windows 10
Michael Johnston This video adjusts settings for your local network. You are thinking about your external IP address. These instructions will not change how you are seen on the WWW
my default gateway is a bunch of mixed numbers. Only my wifi default gateway looks like that. Well, it has a bunch of mixed numbers as well. But at the end of it, it then gives those numbers.
If you just convert to a static you can cause serious network issues! If I caught an employee changing their IP they would probably get fired! Unless your IT manager, ISP assigns you a static or your running an internal network you can be in serious trouble changing to a static!
@@Trustyourtradezz because that IP might already be used, on a PC or server that is sometimes used. Might be assigned to a laptop that is only in the building at times. IP conflicts can be serious.
@@terrydouglas5008 oh okay got it, but what should he have done though, just match it to the correct IP ? & if that’s the case how was he gonna make it static is there another there way ?
@@Trustyourtradezz if your a business you ask your IT staff to assign you a static. If it's home you you ask your internet provider to furnish a static IP or if your using a DHCP check your settings for a ip outside the DHCP range.
the random dns numbers at the end ruined the tutorial for me I dont see where u got those numbers from at all or if i should use those ones, way to explain that
Go to ur pcs search bar, type cmd and run it, in it type ipconfig now you should see ur default / ipv4 gateways , if u cant find the dns there type ipconfig /all
Thanks man. Your instructions are far better. I tried others but they don't tell you how to get the IP address in the first place. Much appreciated.
Literally my first ever working web tutorial.
thank you i been to 7 videos to just make a minecraft sever and you are first one who explains everything you need in the video
BEST Windows 10 Static IP Address clip on RUclips; THANK YOU! : )
THANK YOU VERY MUCH, MY FIRST TIME SUCCEED WITH RUclips TUTORIAL AND ITS WORK PROPERLY
Thank you bro, you helped me alot. At first it didn't work but after restarting did the same thing again. This time I tried a different ip address and it worked. Just change the last digits.
Not sure if your still streaming content will look but found this use full and give it a try to log into my D-Link switch that its been giving me a headaches. I managed once by i don't know how but exited and cant duplicate it. Wish me luck lol subscribed
thanks a lot man! I've been through a dozen different vids and yours was the most helpful
joseph anderson is this open nat type For call of duty ? Does this work I have strict nat will this make it open
Really helpful video even after 5 years! Cheers!!
Thank you for the vid. Just one question: my alternative DNS Servers adress is in hexadecimals, and I can't insert it for IPv4. Is it a problem to only have 1?
i have cctv dvr and i need static ip . because every time internet modem shuts down the ip changes into another ( because its dynamic ,i guess) .if i follow the steps from your video i am gonna make a static ip for the reason which i want for ?
can I still use the dns servers as shown in config? how would this affect me if I use tor?
If you use DNS server from your ipconfig then you'll use your router as DNS server, which in most cases would be your ISP's DNS, i.e. Comcast, Time Warner, etc.
Exactly what I was looking for. Thanks!!
Thanks for this. It worked for me but with two wobbles:
The command screen on his PC shows two DNS server addresses. Mine only showed one. To over come this I did what he said and Googled "Open DNS Server" addresses for BT (my ISP). They came up and I used them.
Secondly when I exited a warning appeared saying "Multiple default gateways are intended to provide ...... etc". It asked if I wanted to save anyway and I did. The trouble shooter then said all was OK.
After all this, everything appears to be OK. Not sure if the warning will come back and bite me sometime. If it does I shall just revert to automatic IP address.
Regards, John
did it ever bite you John?
John Crook you can use Google dns 8.8.8.8
8.8.4.4
Thanks for the video but honestly if someone is going to configure static ip address you surely shouldn't have to explain how to move and re-size a window. lol
I guarantee someone with way less knowledge than you would want to know this
@@bdragon254 Right
hes trying to get past 5 minutes so he can get money
7 Years and still great!
Cheers! 🍷🍷🍷🍷
i love u a guy was telling me like "if u dont do this i will leak your ipv4" i did this and it changed
Do I need to type my static IP in router website for port forwarding? Or just the standard ipv4 it shows from command prompt
Can you please help me with my issue??? I am trying this on windows 10 and im following your tutorial WORD for WORD and when I get to the part where you said to enter a new ip at the end that your other stuff couldnt reach. I do that and it tells me thats not a valid ip. if I try ANYTHING except what the ip address is supposed to be it says its not valid.
the problem i encountered was that i wasnt able to connect to internet after configuring static ip. so what I had to do was close the properties window after configuring AND disable/enable the connection by right clicking your connection in the network connections window
+Windows 10 Guru Is the IP address your showing us at the beginning fake? I went to track it and couldn't find anything.
WAN IP address and LAN IP address cannot be in a same subnet. Please input another IP address."
Even though I'm using an ip address that's not in my router's range
I have the same problem, have you fixed it?
@@arthurrimbaud9494 No
@@hyikun8123 Try to just use that one that's given to you in cmd.
how will enable both static and Dhcp at same time. for example in my home i m using Dhcp and at office static ip
I click on subnet mask and it doesnt match what my ip config is , should i just copy it over?
Thanks for the video but do you have any video of planning and preparing for the installation of an enterprise router? I hope you answer this and thank you in advance :)
so what are the benefits of having a static IP over a dynamic?
If your computer is sharing resources with other systems, a static IP makes it easier to identify your computer on the network and to set up persistent connections. Also, if you are logging in remotely with Remote Desktop from another location you want a static IP address so that the connection can be forwarded through your router to the right PC. Port forwarding in such instances is to a specific IP address, so you want the PC to have a static IP, preventing forwarding to an unused, or (worse) to the wrong PC if there are others connected to your router.
@@yourwindowsguru I just changed my IP to a static one, after detecting for errors popped up it said "DNS server unreachable" or something like that, but the internet is working fine.
I followed this step by step, and now I have no internet on my computer. Now it's doing a SYSTEM RESTORE, and I am seething with UNHERALDED PURE RAGE. OH AND IT FAILED. Now how Am I supposed to fix this?
just click obtain IP automatically again
where does it say that?
I would just go back and put it back to automatic
It's been solved for a while, sorry it took so long to reply everyone, just called my ISP and had them walk me through this.
how are you typing this then?
I've Set my Windows 10 PC into static wherein I've installed handycafe for our internet cafe. But everyday It keeps changing my IP address and result is all my client PC's that I pointed their IP Address to Server cant be detected. please help.
thanks man! was helpful . keep up the good work!
is there a way to change my ip if i already have a static ip? my isp won't change it
though i press validate settings upon exit ...
oncec i go away from there and again i open it it still shows validate settings box not clicked
and then even dhcp is not enabed when i enter ip on my own
when i enable dhcp using obtain ip address it says ethernet does not have a valiod ip config.
and when i enter ip it says dhcp disabled....
windows 10
Does this work if you’re trying to change your current static ip?
what if u have a wireless connection
+TNT Hippie Still works, select the wifi you are connected to
what he said XD
l tried with wifi and it worked.
great video ,easy to understand thank you
Ok I just followed this video to change my Static IP Address. So how when I go on a online game etc the company won't be able to tell that its me?
Michael Johnston This video adjusts settings for your local network. You are thinking about your external IP address. These instructions will not change how you are seen on the WWW
Ip4 doesn't show up on my windows 10 version?
Do I have to use an OpenDNS DNS? I can't seem to find it...
what are the two methods to change an IP address? thats what i need
Thanks sir but how to connect all wire connection by computer
my default gateway is a bunch of mixed numbers. Only my wifi default gateway looks like that. Well, it has a bunch of mixed numbers as well. But at the end of it, it then gives those numbers.
You don't need the /all switch
Thank you for the video. It was alot of help!!!
If you just convert to a static you can cause serious network issues! If I caught an employee changing their IP they would probably get fired! Unless your IT manager, ISP assigns you a static or your running an internal network you can be in serious trouble changing to a static!
WHY can it cause network issues ?
@@Trustyourtradezz because that IP might already be used, on a PC or server that is sometimes used. Might be assigned to a laptop that is only in the building at times. IP conflicts can be serious.
@@terrydouglas5008 oh okay got it, but what should he have done though, just match it to the correct IP ? & if that’s the case how was he gonna make it static is there another there way ?
@@Trustyourtradezz if your a business you ask your IT staff to assign you a static. If it's home you you ask your internet provider to furnish a static IP or if your using a DHCP check your settings for a ip outside the DHCP range.
it doesnt show my default gateway....please reply back please??....help me i cant connect to my internet... :(
why is my standard gateway with letters in it ?
you need deafult gateway !
it doesnt show my default gateway.... and my DNS server has letters
Albozz the King good job totally worked for me
Version 6 i guess
i did it whit openDNS but i get an error. the DNS server is unavaileble! how to fix?
It didn't work for me
my default is 10.0.0.1and ipv4 says 10.0.0.7 and it is what i use to log onto the router webpage
My dns servers are the same as the default gateway and i don't have an ip under dns severs
Very helpful brother thanks!
Will it work with Hosting Minecraft servers?
too much talk man .......people which are interesting to change ip addresses should know how to right click and moving windows on the screen.
I don't have a static gateway.
+Robert Williams me too
ImBruces i
my problem even after i make it static ip but still changing the ip by it self pls help
Will this change my ip om my router
Thanks helped me alot!
if I was making a garrys mod server how do I put the static IP? what do I put
i can help if you tell me where to find the static ip adress
that's my problem I dnot know what the ip is and where to find it
thanx for the help! ur a genius sir
I have entered your open DNS adress now (208.67.222.222 and 208.67.220.220), does that work?
yes
X awesome man ! Greatly appreciated!
what if i only have 1 DNS server? will this still work
I did everything until the Default Gateway point, bc there is just nothing?
it's like
Default Gateway . . . . . . . . :
and that's it
such videos are why youtube made the playback speed increase feature
all doesnt work for me it says that all is not recognized
Thanks so much this worked wonderfully!
Thank you! This helped me alot.
How do you solve the issue if DNS doesnt stick ?
Why don't i have the default gateway?
i get a warning when i press ok and i dont want to press yes cause i dont know what will happen
what do I do if I have a usb adapter?
my gate may says a bunch of letters on it and wont let me type it in :( any help?
I'm assuming that's your IPV6 gateway, but underneath it should be the ipv4, with a blank space to the left of it.
one of my DNS servers have a bunch of letters in them pls help
Well done my computer is on a shitty situation
Default Gateway is blank on my PC
video was great, much appreciated
Thanks worked perfect !
thanks, worked great
only have one Dns server... hopefully this wont be an issue.
Did it work?
Obito 4Life
yeah.
did you just put the same address for both fields?
Why is it not workinv for me i did it all correctly i double checked it
Thank you brother
does it work with ipv6?
my default gateway isn't there
the random dns numbers at the end ruined the tutorial for me I dont see where u got those numbers from at all or if i should use those ones, way to explain that
Go to ur pcs search bar, type cmd and run it, in it type ipconfig now you should see ur default / ipv4 gateways , if u cant find the dns there type ipconfig /all
gateway not same??
Thank you very much
I don't want it to be static ip anymore. How i get it back?
0liv3rz go into the same properties. ipv4 tcp ip. and click the Obtain Address Automatically. thats will switch it back to DHCP
Thanks bro. more videos.
I do not have DNS server.. how can I set that up?
Use opendns.com they have a tutorial on their site (or you can use the same dns ip that he used in the vid)
Not showing IP address in my laptop
Guys how do I do it if I have no gateway
thanks a lot
THANKS 🖤
Thanks Fam Much Love
+Osama Bin Balln lol
thanks for the ip it is faster than ever
Great video
Perfect
wow great video, thanks man. Can you show me how to find out more about horses ? kappa
omg man you are a god thanks so much!!!
what to use ip address?
my internet stops working when i do it