"so i expect you to restart your computer" *restarts computer, back to the video* "... but before you do that, type this in cmd prompt. now you can restart your computer." *really?*
In the future can you state that you’ll need another computer BEFORE we get to that step. I don’t understand how you didn’t think people would follow step by step.
at: 3:58 the step where you type "ipconfig /release" into the command prompt, my results differ from what I see happen in video. "no operation can be performed on (wifi, locacal area connection* 1 & 2, bluetooth network connection 2) while it has its media disconnected" I am unsure how to proceed :/
@@bharatthami5008 take out the cable and put it back if it doesn't work then do this, connect your pc it shows the ip thing then what you have to do is reset the router so go to your router and don't just take out the power what you have to do is press the button which says "reset" on top of it hope this fixes your problem
@@rohankishibe3696 and i have change modem and it started working but that modem is not sending any signal to a secondary router I am soo sacred by this internet during this lockdown
i just turn off pc flip power switch so pc receive no power hold power button and hold power button to flush caps, then turn on pc it works for some reason.
It works so great. After I did those command promt things and restart the computer, the network came back. I dont need to follow futher steps that are shown in this video. Thanks a lot. Works better than i expected. 🙂👍
@@imrib3r160 right click on device manager and click scan for hardware changes which will be the only thing that will show and it will bring back the driver uninstalled then you know what to install.
When you're updating drivers you can check to see what drivers you used before in the "events" tab .. then right click the driver in device manager and show more drivers, choose the one that events showed last ..
Superb it works! You save my life and internet. 02/16/2020 my laptop lenovo g450 2010. I have successfully reset my wifi network adapter and ip conflict. Thank you sir, keep it up good post like this.
Great video, my only criticism is don't say go ahead and restart your computer and then add another step before you restart. People following this tutorial will hit reset before they flush the DNS.
I will not follow you again, I changed up address following your videos to speed up my computer Then tried to follow this one and got to need another computer. Nevermore.
3 years later and that did it for me as well, thank you!! tried to mess with the ip and dns settings to get faster internet but instead broke it completely, after which windows couldn't automatically find the correct ones, lol
I have the same problem as it says in the video & another that say “The default Gateway is not available”… plz I need help somebody just wanna play GTA RP 😩
For those of you who do not have a second computer, just tether your phone to the PC via USB or Bluetooth tethering to download the drivers to that troubled machine. Also it's always a best bet to watch a video through all the way before following the instructions folks.
Gizma122 too late for me, I uninstalled my driver and can’t find it to reinstall. Now I have nothing and am about to call the manufacturer. Oh god someone help me I am a grad student with an assignment due and the library is about to close. *sobs silently*
Ok so for some reason, when i made it to 3:49, it says "an error occured while releasing interface ethernet : an address has not been associated with the network endpoint.", so what do i do then? Edit: ok so i eventually got it to work about a week or 2 later, i guess for me my router literally kinda just exploded ob the inside. It was an "older" model from 2014 i think, and i guess it got too old? Literally what the guy from our service said and just told us he would give our family 2 router just cause
I’ve done everything in this video up to 3:43, after I put that command in it says “ an error occurred while releasing interface Ethernet: an address has not yet been associated with the network endpoint”. I’m not sure what to do at this point, I’ve tried 3 Ethernet cables, reset my pc, took it into a pc repair place and it worked completely fine there, but at home my computer is the only thing that can’t stay connected to the internet, we’ve tried the Ethernet cables on other computers and it works, and everyone else has no issue with the internet.
@@ZoneDiem what i have to do to make my pc work is unplug the cord from the router for like 20-30 seconds and put it back in, unplugging it from the wall and resetting it didnt work, if i dont unplug it for about 30 seocnds, then i cannot connect to the internet, hope this helps.
I have an X201 Thinkpad. The ethernet has a yellow triangle in it on DM, I've tried everything and can't get it to work. There appears to be no available Windows 10 drivers for it.
I’ve had this problem multiple times and it continues to occur every so often. I’ve fixed it myself through various methods. The easiest fix I found was contacting my ISP and having them guide me through the process of re connecting me to the internet. Hope this helps someone in the future that also haves this problem. :)
@@najamsci2460 Do you have a working phone you are able to use? and do you pay for your internet services? If yes, I suggest getting a hold of your "ISP" (i.e. Rogers, Bell, etc) and having them guide you through the process of re connecting to the internet. It may take an hour or two on the phone depending on your situation, and the agent you speak with, but overall they should be able to find success in fixing your problem, and getting you back online.
That's definitely odd, but like I said, I recommend getting in touch with your ISP if you have access to your modem/router and having a technician guide you through the process of re enabling your ethernet connection. Sometimes it's just better to ask a professional for help, and I am by no means a professional.
When doing “ipconfig /renew” I would get the message “an error occurred while renewing interface Ethernet : unable to contact your DHCP server. Request has times out.”
Thanks my desktop PC now has Ethernet connection I really thank you for your help you are the only knowledgeable PC technician on you tube,thanks Joseph
3:48 "An error occured while releasing interface Ethernet : An address has not yet been associated with the network endpoint. No operation can be performed on Ethernet 2 while it has it's media disconnected"
Maybe a little bit hectic but after all those steps and ultimately shouting down whole house because I didn't know where the modem was it somehow worked. Thanks a lot
Hey, I have problem in 3:55 minutes. After I type ipconfig /release The cmd Tell mě: "an address is not yet associated with the network endpoint" What should I do at this point?
Alessandro Vilucchi interestingly this is the last video i watched to fix my computer, if i recall correctly it has something to do with opening my motherboard and now i can only access short-distanced wifi range (like putting my laptop next to a router)
When I type ipconfig in cmd. It shows an error occurred while releasing interface ethernet : an address has not yet been associated with the network endpoint
@@ZoneDiem I turned off my computer and unplug the router for 5mins and rechecked ipconfig /all in cmd. The default gateway ip is missing. I end up turning off the pc, power down the router and unplug both (TP-LINK ) powerline adapters. Did a power down reset making sure there's good connection. Plugged everything in and it started working again.
3:48 "An error occured while releasing interface Ethernet : An address has not yet been associated with the network endpoint. No operation can be performed on Ethernet 2 while it has it's media disconnected" i got this problem and had tried everything on this tutorial. To fix it i had plugged the ethernet cable into the TV ethernet instead of PC on my router
After having the same problem, none of these tips worked for me. I ended up logging into my sky router and changing from 'gigabyte ethernet' to 'fast ethernet' and boom, it worked
Marlena Martin this did d not work, especially after a restart after uninstalling. Anyone know where I can manually reinstall? When I did uninstall it asked if I wanted to delete the driver files and I said no.
Disable the Ethernet in settings, unplug it, turn off router, plug in Ethernet and then enable, and then turn on the router and hall should be go to go. this helped me and hopefully it helps you guys.
Hi, thank you for making this wonderful video but I've ran I to a problem. When ever I try and do the ipconfig release or renew it just says "the operation failed as no adapter is in the state of permissible for this operation" How do I fix this?
PrinceWULFE did you make sure to run it under admin? If it happens under admin it might read “no operation can be performed on Ethernet while its media is disconnected” then you gotta troubleshoot other solutions
That feel when you follow a process step by step, only to uninstall your network drivers without having another computer to get the drivers, nor do I know the name of the driver. I guess I'm an idiot 😐
I use the short way, in w7 , modify nic parameters, if ip assigned, then turn to dhcp, if dhcp, then i assign an ip to see it connects. then shutdown pc, restart. assign dhcp or fixed ip depending. that's it. cheers!
Gustav Nilsson yeah I got it working but it was by something that I think is called cpd maybe and all I did was the default fix and it worked not sure tho sorry
bro if you are connected to router with LAN cable just put LAN cable in WLAN spot on your router.THen your pc will say something ''allow new ethernet bla bla'' you click yes and you will have ethernet once again.That worked for me after 3 FUCKING HOURS of youtube tutorials and none worked.All of ussuden i tried wlan and worked.
@@tarpe2429 hey man, i tried like 10 youtube tutorials and none of them worked. I tried your solution but i noticed that in my router i dont have a wlan spot. I only have 4 that are named lan1 lan 2 lan3 and lan4 have you got any solution? Thanks
@@fransape9 try turning off your pc then unplug your lan cable from router.Plug it in diffrent lan spot (example from lan 1 to lan 3) and turn on your pc.If that doesnt work try instaling new drivers for ethernet.
Idk if anyone is still looking at this video but I did every step he said up to 3:55 but my computer keep saying there was an error: an address has not yet been associated with the network endpoint. Idek what that means. Can someone help me please?
Hey, I am doing every step correctly until 3:45, but after I wrote the "release" code it says " An error occured while releasing interface Ethernet : An address has not yet been associated with the network endpoint." I don't know what to do now, please help me, I will punch my monitor soon.
"you can uninstall the driver, it's entirely up to you" and then after 10 minutes "you need another computer to get the driver that you just uninstalled". Instead of saying that it's entirely up to us you should have said "download the driver BEFORE you uninstall it". God I wish you would delete this video.
the problem is that if you had the exact same issure hes having, you wouldnt be able to download drivers as you wouldnt be able to connect to the internet. thats the reason you need another computer.
At 3:49 it says after running the command that an error occured while releasing my ethernet, saying that an address has not yet been associated with the network endpoint. And the thing is, a couple months ago this worked!!! WHYYY
If you uninstalled your driver, and you wanted to re install it, you could search up restore, and press create a restore point. if you have your C disk turned on, that means that restore is working. press system restore and select the file.
When I typed in "ipconfig /release" it says "an error occurred while releasing internet Ethernet : An address has not yet been associated with the network endpoint." Paning over the network icon it says it "Identifying"
@@randellstevens4545 no but yesterday I typed it again and this time I got like 8 different ip addresses or something but when I went to the next step it didnt work. I'm going to try calling my internet service and see if they can possibly fix it on their end
@@randellstevens4545 Well I found out how to fix the problem. All I did was simply unplug the router and plug it back it and restarted my pc and boom fixed. 😑 apparently the reset button doesn't do jack.
"so i expect you to restart your computer"
*restarts computer, back to the video*
"... but before you do that, type this in cmd prompt. now you can restart your computer."
*really?*
I know right!
yo i was 100 percent gonna post the same comment then i saw yours 😂
I thought the same thing 😂
Hahaha. /flushdns.
Ikr WTH???
Tells us we need another computer AFTER telling us to uninstall the driver, like we're not following step by step already
Just use a phone.
Pegasus how would you use your phone though
@@gazzaprice1 To download anything you need.
@Skuggi Kuwa I'm talking about drivers and stuff, but, yeah I guess you can't download that.
fr
In the future can you state that you’ll need another computer BEFORE we get to that step. I don’t understand how you didn’t think people would follow step by step.
Right?
Yeah, I did this and fucked myself. I don't even know the name of the driver I need... 😒
@@dilonnarutherford2182 I did same thing and all I did was just restart computer
It happend to me and im scared..
@@nagitokomaeda7689 year late but now ive got to wait all day for my brother to get home (11pm) to even use my computrt because it happened to me
Unfortnately this didn't work, after re-installing the driver, the same message comes up - No valid IP configuration
Same
Call you're internet provider
yes mine too
Same
Same problem. The sooner we chuck all these useless machines in the nearest dump the happier we all will be. Go back to pen and paper.
at: 3:58 the step where you type "ipconfig /release" into the command prompt, my results differ from what I see happen in video.
"no operation can be performed on (wifi, locacal area connection* 1 & 2, bluetooth network connection 2) while it has its media disconnected"
I am unsure how to proceed :/
FYI: Do not delete your driver unless you saved it first and you will need another computer too. Don’t say I didn’t tell you.
@Yuuio You're in trouble like me ... If you uninstalled your ethernet you will never be able to access it like me
@Yuuio Yes thanks I've already redownloaded it
@Qelyn how help
no operation can be performed on wi-fi while it has its media disconnected how to resolve the issue
have u gotten it?
how do u fix it «plz
@@luisagra385 just connect the media
@@rohankishibe3696 how can we connect the media Please tell me.
@@bharatthami5008 take out the cable and put it back if it doesn't work then do this, connect your pc it shows the ip thing then what you have to do is reset the router so go to your router and don't just take out the power what you have to do is press the button which says "reset" on top of it hope this fixes your problem
@@rohankishibe3696 and i have change modem and it started working but that modem is not sending any signal to a secondary router I am soo sacred by this internet during this lockdown
This video is just one big bruh moment.
So glad I looked in the comments before doing anything.
Bro I did the first 3 steps and then i was looking at the comments wajow i'm so lucky i looked at the comments first
Yess so true
how di i get the driver? does the other pc have to be commectred via ethernet? 4:54 why the hell would you think we wernt following step by step?
You just have to be connected by WiFi or ethernet
Ended up uninstalling my wifi
How did you fix this?
Lmao
Same
i just turn off pc flip power switch so pc receive no power hold power button and hold power button to flush caps, then turn on pc it works for some reason.
Same lol what i must do now
It works so great. After I did those command promt things and restart the computer, the network came back. I dont need to follow futher steps that are shown in this video. Thanks a lot. Works better than i expected. 🙂👍
2:24 I’m using Windows 10 and the “change connection properties” option doesn’t exist.
Could've said to take a note before deleting the driver 😑
Slinxy I did the same and feel screwed, did you ever find a solution??
I hust did aswell
@@imrib3r160 right click on device manager and click scan for hardware changes which will be the only thing that will show and it will bring back the driver uninstalled then you know what to install.
@@cjproductions1195 god bless you
When you're updating drivers you can check to see what drivers you used before in the "events" tab .. then right click the driver in device manager and show more drivers, choose the one that events showed last ..
Superb it works! You save my life and internet. 02/16/2020 my laptop lenovo g450 2010.
I have successfully reset my wifi network adapter and ip conflict.
Thank you sir, keep it up good post like this.
Refina Azzahra where did u get your new installed hard drive?
Great video, my only criticism is don't say go ahead and restart your computer and then add another step before you restart. People following this tutorial will hit reset before they flush the DNS.
I will not follow you again, I changed up address following your videos to speed up my computer Then tried to follow this one and got to need another computer. Nevermore.
The first few steps and then the restart fixed mine, thanks a ton
Same here
ME TOO
same
Same
Not me
At this point ive just accepted that my laptop will never connect to the internet while using ethernet.
Do it now if does please tell me what you did
I only followed until 2:14 and my problem was already solved, thanks!
3 years later and that did it for me as well, thank you!!
tried to mess with the ip and dns settings to get faster internet but instead broke it completely, after which windows couldn't automatically find the correct ones, lol
I have the same problem as it says in the video & another that say “The default Gateway is not available”… plz I need help somebody just wanna play GTA RP 😩
Same
For those of you who do not have a second computer, just tether your phone to the PC via USB or Bluetooth tethering to download the drivers to that troubled machine. Also it's always a best bet to watch a video through all the way before following the instructions folks.
After trying 7:06 it says an error occurred while releasing interface internet: an address has not been associated with the network endpoint.
Everyone, do everything BEFORE uninstalling and reset. I did this and it fixed my issue. DO NOT UNINSTALL ANYTHING
Gizma122 too late for me, I uninstalled my driver and can’t find it to reinstall. Now I have nothing and am about to call the manufacturer. Oh god someone help me I am a grad student with an assignment due and the library is about to close. *sobs silently*
Uninstalling the ethernet right?
Ok so for some reason, when i made it to 3:49, it says "an error occured while releasing interface ethernet : an address has not been associated with the network endpoint.", so what do i do then?
Edit: ok so i eventually got it to work about a week or 2 later, i guess for me my router literally kinda just exploded ob the inside. It was an "older" model from 2014 i think, and i guess it got too old? Literally what the guy from our service said and just told us he would give our family 2 router just cause
EyeSoLazy I have the same problem so what did you need to do to get it working?
It means there's no ip set to the endpoint. Do ipconfig /renew
Mine says "An error occured while renewing interface Ethernet : unable to contact your DHCP server. Request has timed out."
What does this mean?
@@YoyoNanana same
EyeSoLazy did yall manage to fix it? If so HOW?
I’ve done everything in this video up to 3:43, after I put that command in it says “ an error occurred while releasing interface Ethernet: an address has not yet been associated with the network endpoint”. I’m not sure what to do at this point, I’ve tried 3 Ethernet cables, reset my pc, took it into a pc repair place and it worked completely fine there, but at home my computer is the only thing that can’t stay connected to the internet, we’ve tried the Ethernet cables on other computers and it works, and everyone else has no issue with the internet.
Yeah me too... Please let me know if you found something
@@ZoneDiem what i have to do to make my pc work is unplug the cord from the router for like 20-30 seconds and put it back in, unplugging it from the wall and resetting it didnt work, if i dont unplug it for about 30 seocnds, then i cannot connect to the internet, hope this helps.
@@matthewmontgomery3956 ok yea, but why though?
did you find anything?
anything? i have online class please help
Hey guys I did all this and nothing worked, I unplugged my cable modem and router for a minute and plugged them in, then everything started working.
Thanks that helped me more than the video
Dude thank god that u exist. I was trying for 2days
Me too
omg yes thanks my guy
He totally explained how to do this in the video ..lmao
as of 1/3/21. this is the solution. i didnt need to reintall driver so thats good. all prompts works.
Lol that’s today
Bro i still have the issue
@@Naser-ts5lz same
U just predict the future
@@gpersonal8972 did u find a solution?
Problem at 3:50 upon entering ipconfig /release I get the whole "NO OPERATION ETC" what did I do wrong please help
After installing the new drivers and everything i downloaded the drivers again yet it’s still saying ethernet doesn’t have a a valid IP adress
I have an X201 Thinkpad. The ethernet has a yellow triangle in it on DM, I've tried everything and can't get it to work. There appears to be no available Windows 10 drivers for it.
How can I know what is my network driver
Hi Buddy, i got up to about 4min20sec did all the steps and it worked, thank you very much.
I’ve had this problem multiple times and it continues to occur every so often. I’ve fixed it myself through various methods. The easiest fix I found was contacting my ISP and having them guide me through the process of re connecting me to the internet. Hope this helps someone in the future that also haves this problem. :)
Please help me i dont understand
@@najamsci2460 Do you have a working phone you are able to use? and do you pay for your internet services? If yes, I suggest getting a hold of your "ISP" (i.e. Rogers, Bell, etc) and having them guide you through the process of re connecting to the internet. It may take an hour or two on the phone depending on your situation, and the agent you speak with, but overall they should be able to find success in fixing your problem, and getting you back online.
@@m0mentum2 buddy we’re already online, the wifi works but the freaking Ethernet says “unidentified network”
That's definitely odd, but like I said, I recommend getting in touch with your ISP if you have access to your modem/router and having a technician guide you through the process of re enabling your ethernet connection. Sometimes it's just better to ask a professional for help, and I am by no means a professional.
Bruh I’m having this problem atm
4:04 after we type in "ipconfig /release" and press enter do we have to wait
Thank you! It worked with just the first steps before the restart.
me too
When doing “ipconfig /renew”
I would get the message “an error occurred while renewing interface Ethernet : unable to contact your DHCP server. Request has times out.”
Careful if unsinstalling the network driver, you will need a second device with internet connection to download the drivers from.
@Victor Medina Then any updates?
Thanks my desktop PC now has Ethernet
connection I really thank you for your help
you are the only knowledgeable PC technician on you tube,thanks Joseph
3:48 "An error occured while releasing interface Ethernet : An address has not yet been associated with the network endpoint.
No operation can be performed on Ethernet 2 while it has it's media disconnected"
Same
Same
Same
Same
Same
Hello, I have a similar issue but I had to stop at 1:25 as I my CMD won't run as Administrator
Are you the admin on your PC?
@@gamertag0o0o17 I am and no longer have the issue. I updated to the latest version of Windows 10 or if not, do a clean install.
Maybe a little bit hectic but after all those steps and ultimately shouting down whole house because I didn't know where the modem was it somehow worked. Thanks a lot
lmaooo same
Hey, I have problem in 3:55 minutes. After I type ipconfig /release
The cmd Tell mě: "an address is not yet associated with the network endpoint"
What should I do at this point?
For the ipconfig /release and for the ipconfig /renew it says "The operation failed as no adapter is in the state permissible for this operation"
Thousand Squad mine is No operation can be performed on Ethernet while it has its media disconnected
Same here
@@herculet have you been able to fix it
Alessandro Vilucchi yes I did! honestly don't remember how though
Alessandro Vilucchi interestingly this is the last video i watched to fix my computer, if i recall correctly it has something to do with opening my motherboard and now i can only access short-distanced wifi range (like putting my laptop next to a router)
Just the first step of your video answered my problem 🙏.
When I type ipconfig in cmd. It shows an error occurred while releasing interface ethernet : an address has not yet been associated with the network endpoint
Me too... Please let me know if you found something to fix it
@@ZoneDiem I turned off my computer and unplug the router for 5mins and rechecked ipconfig /all in cmd. The default gateway ip is missing. I end up turning off the pc, power down the router and unplug both (TP-LINK ) powerline adapters. Did a power down reset making sure there's good connection. Plugged everything in and it started working again.
@@bluelabel222 you are a legend, tried so many things and nothing worked but this fixed it thanks
Blue Label i still have the problem.. i tried everything but not working
This is usually a router issue and simply unplugging it for 30 seconds or so should take care of it
is there any difference in commands if ethernet 2 is experiencing problems instead of just ethernet?
Lol, I watched till 2:13, restated and the internet already started working😂
Problem solved!! 👍👍👍Thanks for your assistance.... Internet started to work after restarting my computer (2:09).
Kudos👏👏👏
Thanks my guy! Helped big time been trying for the last few days to fox this problem. Almost threw the PC in the bin 😂
Same here 🤣
3:40 When I did this, I got an error saying an address has not yet been associated with the network endpoint.
3:48 "An error occured while releasing interface Ethernet : An address has not yet been associated with the network endpoint.
No operation can be performed on Ethernet 2 while it has it's media disconnected"
i got this problem and had tried everything on this tutorial. To fix it i had plugged the ethernet cable into the TV ethernet instead of PC on my router
same
@@reubenhumphrey3323 did you try it
@@youstedfortreder1203 no, I just had the same error message
I have the same problem, any fix yet?
@@gabrielberard4460 i mentioned it in the comment
Thanks, can always count on this guy for a issue fix ..
After having the same problem, none of these tips worked for me.
I ended up logging into my sky router and changing from 'gigabyte ethernet' to 'fast ethernet' and boom, it worked
Even offline ?
And did you do it, where exactly did you go? I logged in sky hub, whats next? Ta
@@rawdawggggg yes while offline.
@@matt2287 sorted. Apparently my antivirus was blocking my connection. Soon as I disabled it, it worked just fine
But thanks anyway
Tysm this worked I was trying to do this for 30 mins you just earned a sub❤
I don’t have another pc and I’ve uninstalled it can’t get it back thanks. My computer is completely brocken
MarcusBY I’ve done the same is there another way to fix this?
All you have to do is under Device Manager, Network Adapters, Right click and Scan for hardware changes and it'll come right back up.
@@MM-bw1lo that doesn't work
I guess you gotta ask a friend for the driver and put it on a flash drive
Marlena Martin this did d not work, especially after a restart after uninstalling. Anyone know where I can manually reinstall? When I did uninstall it asked if I wanted to delete the driver files and I said no.
Thanks keep helping people like this😍😍😍...I have subscribed and liked😍😍
Hey can you suggest some optimum settings for Samson Go desktop mic for my laptop.?
Thank you
My problem was solved after the first step only
Keep up the good work.
Thanks to you since I uninstalled my wifi I had to reset everything and download everything all over again
Disable the Ethernet in settings, unplug it, turn off router, plug in Ethernet and then enable, and then turn on the router and hall should be go to go.
this helped me and hopefully it helps you guys.
I have spent hours and tried what seemed like everything, your video was the only thing that solved my issue. Thank you very much!
For anyone else having problems with this. All I did was unplug my modem for a few minutes and plugged it back in. That helped more than the video.
What if I tried that and it still didn’t work plZ
Amjad ッ I have no clue mate sorry 😐
Hi, thank you for making this wonderful video but I've ran I to a problem. When ever I try and do the ipconfig release or renew it just says "the operation failed as no adapter is in the state of permissible for this operation" How do I fix this?
PrinceWULFE did you make sure to run it under admin? If it happens under admin it might read “no operation can be performed on Ethernet while its media is disconnected” then you gotta troubleshoot other solutions
@@zecapncapn4858 I did run it as an admin, and the troubleshoot but it made no difference. But I've fixed my problem now but thank you :)
@@wolfscarswe HOW?
appeared media is disconected and I cant fix this
@@luisagra385 I figured out how to fix it for me at least. I just shut down my router for 5 min and when you start it again it gets a new IP.
Thank you Britec09 and in my case simply going through the cmd lines and restarting it worked.
i did t he first 2 steps than i read the comments saying i need another computer? am i fucked how do i fic the first cmd promt steps?
seriously same rn
tell me what you did to fix it please ;-;
Thanks mann! I didn’t know what to do anymore but you solved my problem!!
That feel when you follow a process step by step, only to uninstall your network drivers without having another computer to get the drivers, nor do I know the name of the driver. I guess I'm an idiot 😐
Any updates
it comes up with an address has not yet been associated with this network endpoint
I did all the steps... Then i fixed my problem by installing new driver.. thanks for the option..
my pc just completely update the driver and not restarting it yet and it works already !!. thank you so much.
Thanks a lot! This was very helpful!
THE DELETE NETWORK ADAPTER AND SCAN HARDWARE CHANGES SAVED ME!!! Tysm!
Glad you put it working
I use the short way, in w7 , modify nic parameters, if ip assigned, then turn to dhcp, if dhcp, then i assign an ip to see it connects. then shutdown pc, restart. assign dhcp or fixed ip depending. that's it. cheers!
Thanks for sharing you method.
@@Britec09 Thank you for all the videos and sharing your knowledge!!
You're welcome
3:48 i got: An error occurred while releasing interface ethernet : an address has not yet been associated with the network endpoint. 😢
My WiFi was perfect after the scan for driver changes, thank you kind sir
Wym, what happend
Any updates on what this means
followed all your steps but cant continue on step 3:45 as it says all medias for ports are disconnected
Always forget how to do this when my internet is having trouble, but this sure helps every time! Thanks man
Great video and useful info Bri
Cheers Daz
It was really helpful thanks buddy 💯🙌🏽🍻🍻
Way to much work but it was worth it tysm this fixed my problem 👍
I have tried literally everything these videos have said and nothing is working any ideas .
Gregory Dewar Same for me. Saw you posted this a month ago, does it work for you now? If so, how did you fix it?
Gustav Nilsson yeah I got it working but it was by something that I think is called cpd maybe and all I did was the default fix and it worked not sure tho sorry
@@gregorydewar7473 alright well thanks anyway
Gustav Nilsson did you get it working
At 3:50 when I type that command it says an error occurred while releasing interface Ethernet do you know what I should do?
IVE TRIED EVERY SINGLE VIDEO AND NONE WORKED WTF
Same here after upgrading to windows10
bro if you are connected to router with LAN cable just put LAN cable in WLAN spot on your router.THen your pc will say something ''allow new ethernet bla bla'' you click yes and you will have ethernet once again.That worked for me after 3 FUCKING HOURS of youtube tutorials and none worked.All of ussuden i tried wlan and worked.
@@tarpe2429 hey man, i tried like 10 youtube tutorials and none of them worked. I tried your solution but i noticed that in my router i dont have a wlan spot. I only have 4 that are named lan1 lan 2 lan3 and lan4 have you got any solution? Thanks
@@fransape9 try turning off your pc then unplug your lan cable from router.Plug it in diffrent lan spot (example from lan 1 to lan 3) and turn on your pc.If that doesnt work try instaling new drivers for ethernet.
January December fuck bill gates I’ll never buy this windows crap again
Idk if anyone is still looking at this video but I did every step he said up to 3:55 but my computer keep saying there was an error: an address has not yet been associated with the network endpoint. Idek what that means. Can someone help me please?
Guys..
Just manually add IP, DNS, Subnet mask, Gateway in Ipv4 and problem solved.
Need me 3 hours to figure this alone
What the fuck does this even mean
what do i make them??
what do we do if at 3:52 (after running ipconfig /release) we get an error saying an address has not yet been associated with the network endpoint?
also running ipconfig /renew returns with unable to contact your DHCP server
Did you ever find out how to fix it I’m here a year later and have the same problem
WHAT DO I NEED TO INSTALL U DIDNT PUT A LINK AND I DONT KNOW WHAT TO INSTALL U EVEN DIDINT SAY WE NEED ANOTHER PC
It will be specific to your motherboard
You can find what motherboard you have through device manager
Hey, I am doing every step correctly until 3:45, but after I wrote the "release" code it says " An error occured while releasing interface Ethernet : An address has not yet been associated with the network endpoint." I don't know what to do now, please help me, I will punch my monitor soon.
"you can uninstall the driver, it's entirely up to you" and then after 10 minutes "you need another computer to get the driver that you just uninstalled". Instead of saying that it's entirely up to us you should have said "download the driver BEFORE you uninstall it". God I wish you would delete this video.
the problem is that if you had the exact same issure hes having, you wouldnt be able to download drivers as you wouldnt be able to connect to the internet. thats the reason you need another computer.
@@cjproductions1195 oh I understood that perfectly. After I did it.
At 3:49 it says after running the command that an error occured while releasing my ethernet, saying that an address has not yet been associated with the network endpoint. And the thing is, a couple months ago this worked!!! WHYYY
This didn't work for me. No idea what the hell is going on.
@Aaren Audette not directly from these suggestions, but on my fourth attempt of rebooting my router and pc it decided to go back to normal.
If you uninstalled your driver, and you wanted to re install it, you could search up restore, and press create a restore point. if you have your C disk turned on, that means that restore is working. press system restore and select the file.
YOU LEGIT SAVED MY LIFE, and for some reason the main problem for what i've watched the video too, i'mma subscribe to your Channel instead
@@Adam-gb2hm no problem man
LMAO I literally just unplugged my router and plugged it back in and now it works😂😂😂
Same bro 😂😂😂😂😂😂😂😂😂😂😂
Ya same !
I have to wait 3 or 4 days and even then it might not work becous it gets unpluggd almaste all the time
It works for halfhour and then the internet is gone again same problem, any idea why?
This one pertained to me so much, thanks
Glad I could help you out.
When I typed in "ipconfig /release" it says "an error occurred while releasing internet Ethernet : An address has not yet been associated with the network endpoint." Paning over the network icon it says it "Identifying"
same did you find a solution?
@@randellstevens4545 no but yesterday I typed it again and this time I got like 8 different ip addresses or something but when I went to the next step it didnt work. I'm going to try calling my internet service and see if they can possibly fix it on their end
@@Vendead54 Good luck to you. Unfortunately the only ISP in my residential area is garbage, so hopefully you fare better!
@@randellstevens4545 Well I found out how to fix the problem. All I did was simply unplug the router and plug it back it and restarted my pc and boom fixed. 😑 apparently the reset button doesn't do jack.
@@Vendead54 Thank you LvMax, I appreciate the response. Unfortunately the cables used here were junk and had to pay for new cable hook ups.
renewing did not work. "ETHERNET" cant establish connection with DHCP server.
anyone upvoting this comment: setting a manual IP fixed it for me. just maker the number at the end one higher; if it was 145 change it to146
tried everything in this video and it didnt fix it :(
@mralex070 yeah i got that too lol
Just unplug everything for like 30 mins, replug and run troubleshooter
After following half of this video, I went to the router and changed the ethernet port to another and simply like that it worked🤷♂️
brian can you do a vid on why theres no internet in sandbox
I see what I can do.
the first 3 cmd commands dit it for me. restarted and had it back up. thank you
It's going to take a few replays but that is definitely one for the save library.
Cheers
Glad I could help
@@Britec09 Not half as glad as I am🤣