Quick Oil Boiler Service! Nozzle and Filter Change!
HTML-код
- Опубликовано: 14 окт 2024
- In this video, I find the wrong nozzle installed in a Burnham Oil Boiler. I install the correct nozzle, change the oil filter, and make adjustments to the air band.
Like and Subscribe!
email me
jeffshvacadventures@gmail.com
I like that you use the proper tools. The use of the proper size hydraulic wrenches and NOT an adjustable wrench, sets you way above the bubba's out there!
I appreciate that.
Looking forward to Part 2 😃👍👍👍
If you’re servicing your own furnace you should open up the fire box and clean it out with wire brush and vacuum. You should set the electors with a tool that gives you proper adjustment ( Amazon ) .
Can you make a video on all the possible causes for a delayed ignition on Beckett AGF ?
Thanks.
Not sure if I missed it, but when was the last time the furnace was serviced?
Not sure on this one.
I did this tune up and cleaned out furnace plus chimney but im still getting dark grey almost black smoke coming out chimney...this didn't happen until right after a oil delivery
Hmm, I would check for water in the oil. There’s a paste that you put on the end of a stick and drop it down into your oil tank and if the paste changes color, you got water. I would also check the combustion with an analyzer. If you don’t have one, hire a company to do it.
@@JeffsHVACAdventures will do thanks...im so lost because I do this every year and never had this problem I replace with same parts and put things back exactly how they where only thing I did differently was use one of the beckett z guage to place the nozzle to the flame retention head and electrodes...I didn't replace the electrodes jus cleaned them up.
@@JeffsHVACAdventuresWhat do you do if you have water?
Did you bleed/prime the pump?
I'm sure I did. Made this video awhile ago.
@@JeffsHVACAdventures I just changed my filter myself since i ran dry my oil last year and someone recommended it. Do i need to prime it just for a filter change?