Langmuir and Hypertherm Quick Tip 01
HTML-код
- Опубликовано: 7 сен 2024
- Add a Jog in your program so the torch gets out of the way after the cut is done and be sure to put a piece of something along that path to block the air from blasting the water in your table everywhere.
Helpful Links:
www.langmuirsy...
www.langmuirsy...
The Hpertherm Powermax 45 XP
- Model 088114 Hand System
- w/o CPC
- 50' Leads
www.hypertherm...
Langmuir Systems Crossfire Pro
www.langmuirsy...
-- Shop 29 --
Documenting the good stuff that I work on.
Check out my sister channel @SCREEN 29 for the good stuff that I see.
#Shop29 #langmuirsystems #CrossFirePro #shorts
Cool tip, thanks
Looks like you blew all the water out of your table already, what is the problem 😊
It leaks at the seam of the two pans, I just dump enough water in there to keep the pan from warping when I need to use it. Then drain it off. Really only gets used once or twice a month. One day I will weld the pans together.
How did you get your hypertherm to work with the cnc
There is an assembly video of the system on my channel. I show how to wire into the hypertherm to make it work