Hey no problem hope the video helps you. That's why I put these video on to try to help other guys out. It would Be cool to see your 59 sounds sweet. Thanks for watching have a merry Christmas👍
Thanks a lot man. I new you would know lol. I have a old school gringo helmet I use when I ride my old chopper they make some cool parts to. Thanks for watching my friend👍
Hey Mike cool hope it helped out. Might be a little harder for you your parts are a little bit smaller to work with lol. Good luck brother going to be cool how ever you figure out to do it. I remember when I was building models I built one I believe it was a 66 or 67 chevelle black with red decal flames And it had a tilt front end. You probably have seen it it's a older one. It's the only one I can remember building that came with a tilt nose. Have a good one👍
hello mike here came across your videos love 55 chevys man you do some very nice workmanship love how you explain everythink love your car keep up the good work ill be looking at all of your videos love it one day at a time your you will have one bad ass car thanks mike love it keep going don't stop the videos great channel
Hey thanks Mike I appreciate that a lot. Glad you like the build. She's coming along sill a lot of work to do but I'll get it one day. I appreciate you watching and your comment. Take care out there👍👍👍
Thanks a lot.You got to see a lot so far lol. You said your building a 55 to would be cool to see it. You can email a picture if you like. Take care man👍
Bro! Wow Nice tool box and sander and stuff! What a great gift from your wife. She's a keeper! I'm really liking the way your tilt system is going. I think you had it right when you measured the height. I'm going to lay a straight piece of box tubing and measure mine like that. Nice work brother! 👍😎
Hey Gorni yes she sure is a keeper😁 been with her 25 years all most. I think the tilt should work good I'm hoping. We I get my new bigger back tires hope the front don't go down to much. Have a good night brother👍
thanks for the nice reply your the one with special hands very good work keep it up friend very cool ride very soon keep it up mike be watching all videos mike
Thanks for your nice reply also. I do appreciate the comments. A lot Better than some guys who just give the thumbs down and move on with no reply why. Take care brother👍
Hey Chris. That hood opened up looks killer. I bought a sander like you have, except it is a bench model. Cool toolbox. I could use another box in my shop. You sure are coming along with your build. See you in the next one. Thanks for sharing.🍁👍👍
Hey Andy thanks a lot. yeah I love the carb sticking up through the opening. I think it looks killer to. Those Sanders sure are nice. I saw the same one you bought. I all most got that one then I saw the bigger one and then I fell In love with it lol. So I said it's just money I'll make more tomorrow😁 so it came home with me. Thanks for watching Andy and you be safe out there buddy👍
Hey thanks a lot. I don't know about me but the old 55 sure is lol. It will be a fun day the first time I cruise the old car for sure. Thanks for watching I appreciate it be safe👍
Nice work Chris as usual luv that sander . Santa came early for you I see tool box too very nice!I have an old antique large combo one like that in my basement you inspired me to get it back running. We had those huge flywheel sanders at my old job we made aircraft parts did that for 28 years. I also worked for Eastern Airlines as a A&P mechanic for 10..Those big sanders would grind your fingers to the bone if you slipped,LOLL ...Glenn
Thanks a lot Glenn. Got to love it when the wife gets you a new tool box for sure. My boss has a old big belt sander thats what made me get mine. They sure are nice don't hurt you back getting that old one back out. there heavy as a tank lol. Take care and be safe out there my friend👍
Looking great my friend!!! That tilt is gonna be awesome to be able to run a hood or not run hood. I like it!! Lol 47.5. I’ll get out to the other garage and measure mine soon.
Thanks herb I appreciate it. Yeah going to be nice to run it with the hood or not I think. Can't wait to know how high your 57 is I think it's much higher than mine. But I'm in the lead for now lol. But not for long😁 you be safe out there buddy👍
Thanks a lot Gus that means a lot. I do like the new tool box the wifes a great lady I guess she just might love me lol. You take care Gus have a good night👍
Hey thanks a lot Mike. I think it's going to work good hopefully. Be cool if you get that old truck you got running some day that's pretty much what my old truck was like when I got it home.Thanks for watching take care buddy👍
Hi ya Chris.. love how your doing the tilt hood.. still have to work on that for mine as well. Probably can’t use your design as I still have the stock frame rails. But I’ll see if I can modify your idea some to work on mine.. plus a 57 is a little different to tilt. The tool box is pretty cool. Where did you get the sander.. that’s really cool. I need one for my shop. I haven’t done any new videos as I’m in the process of moving out of my apartment and buying a house (finally!!). I’ll do a full video detailing my new garage as soon as I get moved it and situated! Keep up the great work!
Hey Dave thanks a lot. I got the belt sander at Harbor freight it was like 250 not to bad works good. Nice your getting a new house now you can have a nice big garage hopefully can't wait to see it. Be safe out there buddy👍
Looking awesome can't wait to see it finished it's going to be trick. I've been thinking about getting one of those combination sanders are they worth the money? Getting closer to the finish line stay hammered down. 😆
Thanks Scotty I appreciate that😁 the belt sander works really good actually I think it was worth the money for sure. I got it at Harbor freight for 250 not to much but man it does make it a lot easier. Just need to get some metal sanding belts for it now. It take the 48" belts it's pretty good size. You guys Be safe out there
Thanks Bob just like you say a little here a little there we will git er dun for sure. I appreciate you watching brother you take care bob👍 and be safe. Can't wait to see what you do with that old Henry J.
Hey brother yeah it might be a little while be for cruising the old 55 got to get a bunch more parts first. But your right got me a bunch of horse power now 😆 lol. You take care my friend👍
Way over built,,,,,anything you hit bigger than a squirrel,, everything crumples back to the block. Mine is glass tilt frt. end,,,hope it never happens,,,been street driving for 15 yrs. +. Greaseable bushings??,,,,LOL
@@IronheadGarage No ,aint any better than the rest. 66 chevy 1/2 ton axle,,4 in. cut out of middle. Entire frt. axle all GM. Stock frame,boxed,,all pieces bolted on ,,nothing cut. Nascar spec Winters quickchange rear end. All bolted ,nothing cut!! Ol Skool Rodz cover ,3 pg. article. Sept. 2013. 41 1/2 high @ fender brow. Can,t wait till you hit the road!!
YOU'RE QUITE A TALENT!! ....YOUR DESIGN IS OUTSTANDING!! YOU ROCK CHRIS!!
Thanks a lot Bryan I appreciate that😁
You get your 55 in the shop yet?
Be safe out there buddy
Thanks for the video, I'm trying to figure out how to tilt my 59 ranchwagon front clip. These videos help out a lot. Awesome 55 you have too.
Hey no problem hope the video helps you. That's why I put these video on to try to help other guys out. It would Be cool to see your 59 sounds sweet. Thanks for watching have a merry Christmas👍
Biltwell helmets and bike stuff!! Cool stickers on a cool tool box. You do great fab work. Well done!!
Thanks a lot man. I new you would know lol. I have a old school gringo helmet I use when I ride my old chopper they make some cool parts to. Thanks for watching my friend👍
Ironhead Garage you know Im a big fan of your work. I dig all the cool ways you come up with
@@JAWSatBCPerformance thanks man that means a lot. I try my best😁
Popped up in my feed. Had to learn how you did it. This will help me figure out that front clip. 🍻👍🇨🇱
Hey Mike cool hope it helped out. Might be a little harder for you your parts are a little bit smaller to work with lol. Good luck brother going to be cool how ever you figure out to do it. I remember when I was building models I built one I believe it was a 66 or 67 chevelle black with red decal flames And it had a tilt front end. You probably have seen it it's a older one.
It's the only one I can remember building that came with a tilt nose.
Have a good one👍
@@IronheadGarage
Thanks man yeah I have a hinge it's just building the structure to support it
hello mike here came across your videos love 55 chevys man you do some very nice workmanship love how you explain everythink love your car keep up the good work ill be looking at all of your videos love it one day at a time your you will have one bad ass car thanks mike love it keep going don't stop the videos great channel
Hey thanks Mike I appreciate that a lot. Glad you like the build. She's coming along sill a lot of work to do but I'll get it one day. I appreciate you watching and your comment. Take care out there👍👍👍
This is where i started. Beautiful car
Thanks a lot.You got to see a lot so far lol. You said your building a 55 to would be cool to see it. You can email a picture if you like. Take care man👍
Bro! Wow Nice tool box and sander and stuff! What a great gift from your wife. She's a keeper! I'm really liking the way your tilt system is going. I think you had it right when you measured the height. I'm going to lay a straight piece of box tubing and measure mine like that. Nice work brother! 👍😎
Hey Gorni yes she sure is a keeper😁 been with her 25 years all most. I think the tilt should work good I'm hoping. We I get my new bigger back tires hope the front don't go down to much. Have a good night brother👍
thanks for the nice reply your the one with special hands very good work keep it up friend very cool ride very soon keep it up mike be watching all videos mike
Thanks for your nice reply also. I do appreciate the comments. A lot Better than some guys who just give the thumbs down and move on with no reply why. Take care brother👍
You are doing a great job, making sure everything is right. Fella after my own Heart! God Bless, Jim
Thanks a lot James I appreciate it a lot. Trying to do my best with what I know. Thanks for watching take care be safe out there👍
Hey Chris. That hood opened up looks killer. I bought a sander like you have, except it is a bench model. Cool toolbox. I could use another box in my shop. You sure are coming along with your build. See you in the next one. Thanks for sharing.🍁👍👍
Hey Andy thanks a lot. yeah I love the carb sticking up through the opening. I think it looks killer to. Those Sanders sure are nice. I saw the same one you bought. I all most got that one then I saw the bigger one and then I fell In love with it lol. So I said it's just money I'll make more tomorrow😁 so it came home with me. Thanks for watching Andy and you be safe out there buddy👍
You got some serious engineering going on. Looks great. The sander and toolbox is sweet.
Hey thanks it should work good I think. Got to love it when we get some new tools😁 thanks for watching buddy I appreciate it be safe👍
Hey chris you and your car are awesome. Cant wait to see ya cruising in it.
Hey thanks a lot. I don't know about me but the old 55 sure is lol. It will be a fun day the first time I cruise the old car for sure. Thanks for watching I appreciate it be safe👍
Car looks great! That is a really nice belt sander! Love the tool box looks cool gave mine away to my buddy when I got new ones.
Hey thanks a lot yeah the belt sander is nice to use a lot better the the old grinder. Thanks for watching👍
It looks fantastic Chris! I’m looking forward to seeing it working.
Thanks man. Yeah me to it's going to be sweet to have it tilt. I think it should work good. Thanks for watching be safe👍
It's coming along nicely 👍👍🇨🇱
Hey thanks Shane I appreciate it. I'll get her going one day. Thanks for watching and take care man👍
Great work man love your attention to detail
Thanks fiano I appreciate it. I try my best brother I think it's going to work good. Take care my friend👍
Nice work Chris as usual luv that sander . Santa came early for you I see tool box too very nice!I have an old antique large combo one like that in my basement you inspired me to get it back running. We had those huge flywheel sanders at my old job we made aircraft parts did that for 28 years. I also worked for Eastern Airlines as a A&P mechanic for 10..Those big sanders would grind your fingers to the bone if you slipped,LOLL ...Glenn
Thanks a lot Glenn. Got to love it when the wife gets you a new tool box for sure. My boss has a old big belt sander thats what made me get mine. They sure are nice don't hurt you back getting that old one back out. there heavy as a tank lol. Take care and be safe out there my friend👍
Nice Chris, really good video
Hey thanks Mike.
The start of the tilt front end. Man it was a lot of work lol.
Thanks for watching👍👍👍
Looking great my friend!!! That tilt is gonna be awesome to be able to run a hood or not run hood. I like it!! Lol 47.5. I’ll get out to the other garage and measure mine soon.
Thanks herb I appreciate it. Yeah going to be nice to run it with the hood or not I think. Can't wait to know how high your 57 is I think it's much higher than mine. But I'm in the lead for now lol. But not for long😁 you be safe out there buddy👍
Hey Chris the car is coming along nicely. Love the tool box its great man. Your car is going to be so cool brother.
Thanks a lot Gus that means a lot. I do like the new tool box the wifes a great lady I guess she just might love me lol. You take care Gus have a good night👍
good work nice love it
Hey thanks a lot I appreciate it. Lots more work to do but I'm gettin it. Thanks for watching and be safe👍
Coming along nicely 👌 gonna look sharp bro 👍👍👍👍👍👍
Hey thanks a lot Mike. I think it's going to work good hopefully. Be cool if you get that old truck you got running some day that's pretty much what my old truck was like when I got it home.Thanks for watching take care buddy👍
Hi ya Chris.. love how your doing the tilt hood.. still have to work on that for mine as well. Probably can’t use your design as I still have the stock frame rails. But I’ll see if I can modify your idea some to work on mine.. plus a 57 is a little different to tilt.
The tool box is pretty cool. Where did you get the sander.. that’s really cool. I need one for my shop. I haven’t done any new videos as I’m in the process of moving out of my apartment and buying a house (finally!!). I’ll do a full video detailing my new garage as soon as I get moved it and situated! Keep up the great work!
Hey Dave thanks a lot. I got the belt sander at Harbor freight it was like 250 not to bad works good. Nice your getting a new house now you can have a nice big garage hopefully can't wait to see it. Be safe out there buddy👍
Looking awesome can't wait to see it finished it's going to be trick. I've been thinking about getting one of those combination sanders are they worth the money? Getting closer to the finish line stay hammered down. 😆
Thanks Scotty I appreciate that😁 the belt sander works really good actually I think it was worth the money for sure. I got it at Harbor freight for 250 not to much but man it does make it a lot easier. Just need to get some metal sanding belts for it now. It take the 48" belts it's pretty good size. You guys Be safe out there
@@IronheadGarage You too have a good week.
A little here and a little there will git er dun!
Thanks Bob just like you say a little here a little there we will git er dun for sure. I appreciate you watching brother you take care bob👍 and be safe. Can't wait to see what you do with that old Henry J.
Yes sir. Looking good.
Thanks Joe I appreciate it I'll get that front end to tilt😁
Be safe out there👍
It won't be long and you will be cruising, all kinds of horse power on that tool box!
Hey brother yeah it might be a little while be for cruising the old 55 got to get a bunch more parts first. But your right got me a bunch of horse power now 😆 lol. You take care my friend👍
Sweet
Thanks man I appreciate it.
I'm glad you like the build. Thanks for watching👍
Sweeet!!!
Thanks a lot I appreciate it. Thanks for watching take care man👍
Way over built,,,,,anything you hit bigger than a squirrel,, everything crumples back to the block. Mine is glass tilt frt. end,,,hope it never happens,,,been street driving for 15 yrs. +. Greaseable bushings??,,,,LOL
Man wish I would have built mine just like yours!!
I'm sure yours is the best
Man!!
Thanks for watching I appreciate the support😁
@@IronheadGarage No ,aint any better than the rest. 66 chevy 1/2 ton axle,,4 in. cut out of middle. Entire frt. axle all GM. Stock frame,boxed,,all pieces bolted on ,,nothing cut. Nascar spec Winters quickchange rear end. All bolted ,nothing cut!! Ol Skool Rodz cover ,3 pg. article. Sept. 2013. 41 1/2 high @ fender brow. Can,t wait till you hit the road!!
Right on. My front frame horns where bent so that's why I cut and made my own sub frame or I probably would have left it.
Don't hit a squirrel with your glass front end or it will be toast. Remember steel is real