From all the how-to vids on youtube this one is just awesome - wish you were my organic chemistry teacher I would have got an A -🥰😍🤩😘- its just the way you talk and explain is A-plus also you are extremely cute!!!
I have the same Gold Battery Terminals. My original set got ruined when my Dad sprayed CRC Battery Terminal Protection on them. The gold plating did not like that stuff
I put my rocker switches in the bezel, and put Autometer gauges in the 4 gauge spot, barely fit. I also like my double din conversion. Have to carve the dash a little and paint the piece, but love mine with backup camera
OK you got me with the penny in the cigarette lighter LOL. Those brackets are pretty slick. Easy to add and remove if you wanted. You're better than me I need to finish wiring my aux lighting properly. Got 2 lights to install on my push bar still to install and my LED bed lighting is just lazily hanging under the dash.
Hahaha! My 2 year old was in the truck while I was filming and she dropped a few of them in the cigarette lighter. Lol They are and I think I found them by accident years ago. Hey, wiring is actually tedious and it takes a lot of planning for it to look really good. I’d give mine a B. I’m sure there are way more professional wiring jobs out there.
Yeah I’m typically not a huge fan of altering the stock interior, but I saw this as a major benefit to my truck. The retrofit is also very stock looking.
Hahahaha! I wish I was doing something fun like that with these ditch lights. In Iowa, these are normally meant to illuminate the sides of the road so that you can look down into the ditch, spot deer, or have more light as you turn or descend a slight slope.
Hey man u know the size for the waterpump bolts its cause when I got my trucl it only had 5 bolts and wanted to know were can i get all 7 new my truck is a 96 5.0 302 f150
@@TheMinuteMasters hey so i was doing research and is the mustang 5.0 the same ?? Bolts tjat my only bet and im missing 2 bolts so its 5 bolts on the waterpump
Nice tutorial. Are the mounting bolts for the lamps stainless steel? If not, I think I’d switch them for stainless ones or you’ll eventually get rust stains on the fender from the bolts dripping rust - plus they’ll look crappy if they are rusty themselves. The brackets are a neat design. 👍🏻
I was wondering if one day you could show a video of the windshield wiper linkage assembly. When I turn on my wipers to max speed its still slow by a lot. Maybe I would need to lubricate the linkages with wd40?? Thanks! :D
@@TheMinuteMasters Thanks for the tip! I currently have a 91 obs and I got it from a previous owner who I knew and that trucker has been inoperable and sitting since 2019 so there's a lot of tasks to be done and your videos help a lot. The dipstick tube snapped so I'm trying to figure how to take on that job at the moment.
Ok so I have replaced all my ignition components all but the distributer and I'm getting a misfire with really awful gas mileage so I'm not sure what to do at this point. New ICM,Ignition coil,Plugs and wires and cap and rotar.
Thanks for the informative content. Seems there’s only way to reach out to you is via comment, we are looking for opportunities to showcase our new arrival pod lights. Are you open to doing a review on them?
I can be reached here and IG dm. Unfortunately, I already have this set of pod lights and I don’t typically do reviews without it being related to an install.
From all the how-to vids on youtube this one is just awesome - wish you were my organic chemistry teacher I would have got an A -🥰😍🤩😘- its just the way you talk and explain is A-plus also you are extremely cute!!!
Thanks man!🤙
I have the same Gold Battery Terminals. My original set got ruined when my Dad sprayed CRC Battery Terminal Protection on them.
The gold plating did not like that stuff
Really? I wonder why it reacted with the plating.
@@TheMinuteMasters I dunno, it was that red looming coating. It ate that gold plate up
I put my rocker switches in the bezel, and put Autometer gauges in the 4 gauge spot, barely fit. I also like my double din conversion. Have to carve the dash a little and paint the piece, but love mine with backup camera
Lol I also put in a 99 explorer overhead console and spliced in my psom for windchill cal, and love the compass and temp gauge:)
Nice! It takes some skill to come up with ways to mount more gauges in these trucks. Not a whole lot of flat surfaces.
OK you got me with the penny in the cigarette lighter LOL. Those brackets are pretty slick. Easy to add and remove if you wanted. You're better than me I need to finish wiring my aux lighting properly. Got 2 lights to install on my push bar still to install and my LED bed lighting is just lazily hanging under the dash.
Hahaha! My 2 year old was in the truck while I was filming and she dropped a few of them in the cigarette lighter. Lol
They are and I think I found them by accident years ago.
Hey, wiring is actually tedious and it takes a lot of planning for it to look really good. I’d give mine a B. I’m sure there are way more professional wiring jobs out there.
I like the idea, but tearing out the original ash tray, and courtesy light, I would have just put it underneath the dash.
Yeah I’m typically not a huge fan of altering the stock interior, but I saw this as a major benefit to my truck. The retrofit is also very stock looking.
Did you remove the cruise control? I don’t see the sensor on the brake cylinder
I retrofitted cruise control into my truck. I still need to convert to a cruise master brake cylinder.
OK, so you didn't learn frog-gigging in Philly. Who you runnin' with in Iowa that hunts in the ditches? :D
Hahahaha! I wish I was doing something fun like that with these ditch lights. In Iowa, these are normally meant to illuminate the sides of the road so that you can look down into the ditch, spot deer, or have more light as you turn or descend a slight slope.
@@TheMinuteMasters You guys just aren't content blinding other drivers. Now you're blinding innocent deer. SMH.
@@borderlineiq 😂😂😂
Hey man u know the size for the waterpump bolts its cause when I got my trucl it only had 5 bolts and wanted to know were can i get all 7 new my truck is a 96 5.0 302 f150
I don’t know the size off hand. My suggestion is taking on of the bolts to a hardware store and matching it if possible.
@@TheMinuteMasters hey so i was doing research and is the mustang 5.0 the same ?? Bolts tjat my only bet and im missing 2 bolts so its 5 bolts on the waterpump
@@miguelgarcia3178 They are almost identical. The intake plenum a are the major visual difference.
Nice tutorial. Are the mounting bolts for the lamps stainless steel? If not, I think I’d switch them for stainless ones or you’ll eventually get rust stains on the fender from the bolts dripping rust - plus they’ll look crappy if they are rusty themselves. The brackets are a neat design. 👍🏻
Thanks man!🤙 I think so. They came with the pods. I did buy larger fender washers and nylon lock nuts that are SS.
But good point!
I was wondering if one day you could show a video of the windshield wiper linkage assembly. When I turn on my wipers to max speed its still slow by a lot. Maybe I would need to lubricate the linkages with wd40?? Thanks! :D
That would make a good video. So far I don’t have that issue. I would try using lubricant first and then go from there.
@@TheMinuteMasters Thanks for the tip! I currently have a 91 obs and I got it from a previous owner who I knew and that trucker has been inoperable and sitting since 2019 so there's a lot of tasks to be done and your videos help a lot. The dipstick tube snapped so I'm trying to figure how to take on that job at the moment.
Can I use that brakets on a f150 1990?
I don’t see why not.
@@TheMinuteMasters thank you God bless you
Is there any way you can pm me I have a 94 wth the 5.0 and have a question. Thank you!
Post it up here it might help others too.
If you want to message me, I have an Instagram account for the channel. Otherwise, feel free to comment here.
Just wondering how many o2 sensors the your truck have?
@ashleyshavers4374 these trucks only have 1 I gotta 95 5.0 and it has just 1.
Ok so I have replaced all my ignition components all but the distributer and I'm getting a misfire with really awful gas mileage so I'm not sure what to do at this point. New ICM,Ignition coil,Plugs and wires and cap and rotar.
Thanks for the informative content. Seems there’s only way to reach out to you is via comment, we are looking for opportunities to showcase our new arrival pod lights. Are you open to doing a review on them?
I can be reached here and IG dm.
Unfortunately, I already have this set of pod lights and I don’t typically do reviews without it being related to an install.