Detailed Volvo XC60 Front Bumper Replacement
HTML-код
- Опубликовано: 10 май 2023
- In this video I show the step-by-step process to remove and reinstall the front bumper/facia on your Volvo XC60. Be sure to like, share and subscribe for more content!
I believe this same process works for:
2010-2016 Volvo XC60
2011-2018 Volvo S60
Washer tank replacement: • Volvo XC60 Washer Flui...
Rear bumper removal procedure can be found here: • Volvo XC60 R-Design Tr...
Instagram @ weakest of weeks: / weakestofweeks
Feel free to contact me at: WeakestOfWeeks@gmail.com 
Авто/Мото
thank you so so much! needed to get access to my front crash bar brackets and this video was perfect
Excellent job, it helps a lot. The explanation was brilliant and as detailed as it can be. Thanks a lot 👍
Fantastic video....i need to do a few jobs on my xc60 bumper and need to get it off, you have just showed me how, thankyou :)
I have done a lot of work on my V60, now I have to replace the bonnet lock and this is really really helpful. Thanks a lot for that! :-)
Nicely done video, it was very helpful!
Excellent explanatory video.
Thank you very much!!!
I used to have a Saab 93 TTiD Aero and now I've got a Volvo XC60 D5. We're car bros!
Thank you for posting this, it will help me a lot on removing mine. I have a pre facelift model, but I suppose the process is about the same.
Väldigt informativ video :)
Can you make a video how too change the front fender for a 2015 Volvo xc60 2015. i will really appreciate it thanks
That was a very satisfying click 😋very informative video 😎👌
Haha thanks friend!
muito bom seu video , voce fez isso muito bem! agora posso ir pro meu!!!
Trés bonne explication merçi
Спасибо
Could I buy an R-design bumper and swap it out for the original on my 2014 model that has the standard bumper? Is it bolt on bolt off like?
The light connect at the passenber side was impossible to disconnect! I just hanged the passenger side bumper on the headlight. Perfect height.
Did u put a flathead screwdriver under the locking mechanism of the contact? If so then i would slide off with a little force if u pull those apart from eachother
Hi Gary - great video. I need to do the same thing on a V60 - also to replace a leaky washer fluid reservoir. Anything I should know about that process? Any tips? Did you have any resources to help with that procedure? Please and thanks.
Hi friend! I actually filmed the process of replacing the washer tank on my XC60. However, I need to finished editing the vid before posting. I've been putting it off bc I wasn't sure if it would be useful but sounds like it might be. Once the bumper is off the washer reservoir replacement is pretty straight forward. The main point of mention is that the washer pumps going back into the new tank are finicky. On the end of the washer pumps are grommets where they mount into the tank and upon reassembly have a tendency to leak. Might not be a bad idea to get replacement washer pump grommets or don't be afraid to use a little bit of sealant on the grommets. A little goes a long way. I also recommend filling the tank up and wiggling the pumps a bit to simulate road bumps before you reinstall the bumper to check for leaks. Outside of that it's a pretty simple procedure. Hope that helps!
Agree great video and I am about to embark on the same repair but will wait until you finish editing the video.
I’ve also got a bad light lens that I would like to replace, is that pretty simple once I have the bumper off? It looked very accessible.
Finally got around to it and posted the washer tank replacement. Hope it helps with your repair! ruclips.net/video/68GJmH6h5nw/видео.html As for the headlight replacement yes, once the front bumper is off you have great access to remove the headlight assemblies.
SAAB 93 👍
Can I ask what year is the car?
2015.5 XC60 R-Design
Cool thank you great video
why I cant save this video in playlist :D,
I can