PARKSIDE 226Nm Cordless Impact Driver PDSSAP 20-Li A1 Upgrade from 1/4 to 1/2 Compact Impact Wrench
HTML-код
- Опубликовано: 24 июн 2021
- #PARKSIDE #ImpactDriver #ErCanEverything
💥In this video i show you, how to convert PARKSIDE Performance 1/4 impact driver to 1/2 impact wrench.
👉First in the World
👍Before the upgrade which could not unscrew the rim bolt at 226Nm, now does not feel it even at 180Nm
👇120 / 180 and 226 Nm Test👇
• PARKSIDE 226Nm Cordles...
👇Tire Swap Video👇
• Winter Tire Swap (Repl...
📌How it Works Impact Wrench Parkside Performance PDSSAP 20-Li A1 at 960fps Slo-Mo Video👉 • How it Works Impact Wr...
👇Impact Wrench Shaft (Anvil) Link👇
s.click.aliexpress.com/e/_EvK...
👇DIY Plasma Burner👇
Make your own Plasma Burner like a Plasma Lighter, with materials at hand
👉 • Video
DIY 20 000 mAh QC3.0 Supported Parkside Power Bank from 20V 4Ah Parkside Battery! Just for $1
👉 • DIY 20 000 mAh QC3.0 S...
DIY Rotating Table Platform from Mocrowave oven motor and Gramophone record holder
👉 • DIY Rotating Table Pla...
PARKSIDE Angle Grinder Extreme Stop vs Fast Stop (which Grinder stops first? Performance or Green?)
👉 • PARKSIDE Angle Grinder...
PARKSIDE Battery Powered, 60V 18A 1080W Professional Power Supply from RIDEN (RD6018W Wireless)
👉 • PARKSIDE Battery Power...
IRFZ44N Powered Induction Heater Experiment with Parkside X20V Battery on 12V 55W and 240V 100W Bulb
👉 • IRFZ44N Powered Induct...
PARKSIDE PLG 20 A3 4.5A Charger Upgrade (Adding Capacity, Voltage, Power and Current Meter in One)
👉 • PARKSIDE PLG 20 A3 4.5...
How to Build a Wooden Kids Swing at Home (DIY Project with Parkside Drill and Hilti Circular Saw)
👉 • How to Build a Wooden ...
PARKSIDE Performance Cordless JigSaw PSSPA 20-li A1 Review, Disassemble and Testing Brushless Motor
👉 • PARKSIDE Performance C...
👇Subscribe to my Channel🙏🙏🙏
/ ercaneverything
Facebook👉 ercaneverything
Instagram👉 / ercaneverything
#lidl
#Lidlpromotions
#cataloguelidl
#lidltools
#drill
#drills
#craft
#electronic
#charger
#upgrade 
Хобби
👇👇👇Subscribe to my channel👇👇👇 ruclips.net/user/ErCanEverything
For those without a lathe.. can we buy the pre machined anvil from you? Yes i know aliexpress sells these in thicker diameter, but not everyone has a lathe who works with screws :-P
And I don't have a lathe, they did that to me in a lathe workshop
@@ErCanEverything ah okay ;-9 maybe buy some and contract to the lathe machine shop ;-0..
Thanks for the work anyways 😸 👍
Wow, amazing transformation 🤯
Now it is 2 in1.
Why manufacturers don't do this at factory at all 🧐
Great craftsmanship 👏
Wanted this black driver , now I must have it , perfect size for the things i do in rhe workshop, and much more powerfull than the bosch freak tools
Страхотно! Полезно за хората, които искат да си направят същата преработка.
Блабодаря приятелю🙂
Nicely done, 10 points for craftsmanship! The result is shocking. 👌
Thank You Bro❤
Thats the video i wanted to see! Thank you!
Nice job, I'm going to make myself a cheap/compact impact wrench :D
Très bonne idée, Merci pour le partage l'ami 👍🙏
Amazing upgrade, its more powerful now, great 🏋️🏋️
Indeed, the power has increased significantly
You can everything! Bravo!
Thank you🙏🙏🙏🤝
FN awsome I wish I had this on my Milwaukee gen 3.5 ID it would be absolutely epic.
Grande mestre, parabéns e obrigado por partilhar
Thank You🙂
Изключително полезен клип , браво приятелю.
Благодаря приятел, радвам се щом ти е харесал🙂
Здравей!
Страхотно видео, както винаги.
Принципно от 1/2ра има много прилични преходници и като цяло тази конверсия според мен не е многи необходима.
Обратният вариант от 1/4 хекс към 1 /2 ра силно необходима.
Just modded the B2 version, woks the same way, also with the same parts.😁
Puedes hacerlo con el nuevo parkside performance impacto?
Small 8 mm bushing is pressed in tight only. Can it fall out of its hole because of hanmer vibrations?
Best swap 😁
Thank You🙂
Amazing! But where did you find the new front square 1/2" piece? Is it from another Parkside model? Or something else? Thank you.
I wrote the link below in the description
Drill- Packedge in typical box, came with a tool bag (added bonus), two batteries, one charger, drill, and driver. Two words "plenty of Torque" ruclips.net/user/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv well I guess that's three. Nice upgrade from current setup. Has belt clips, I don't think I will be using those. Driver and drill were bigger than what I expected but it is an upgrade from the current setup. For the money I would say that this is a great setup for Professionals and DIY/Weekend warriors.
Very good idea.
Surprised to see the performance the shafts alone makes.
What grade grease are you using pls?
Standard high speed grease.
Very well seen for the fat! Parkside has a nasty habit of putting in very little! I keep saying it in my videos.
Isn't there a ready-made system that would allow those who are not lucky enough to have a lathe like you to make this modification?
Even I would be up for it, because I have this model, and I think it's the best of the existing "performance" series
Simply brilliant, congratulations on your work, it's fantastic. I would like to do the same on my machine, could you please tell me where to buy this part? thank you greetings
Thank you very much, I left a link in the description.🙏🤝🤝🤝
Helal olsun Ustam
Teşekkür ederim abi🙏🤝
Peut on faire pareil pour la version B2 ? Les dimensions sont pareils ?
Hello is there a link for bushing and washers with this specs?
Can you make for me the kit please 👌
Great job, can i have a newest working aliexpress's link for parkside brushless upgrade?
Thank you🙂🤝
Now I updated with new link
s.click.aliexpress.com/e/_EvKYpx3
Great job.
Is this also applicable to the new version of pdssap 20 b2? According to the videos, it looks like there will be different washer, maybe a different storage in the metal head.
Thank you🙏🙏🙏
Someone even did it in Parkside Bulgaria, but there is no video.
m.facebook.com/groups/550362742361958/permalink/1053162778748616/
@@ErCanEverything I will try to get into this group on fb and find out more.
Thanks for the tip. I tried to go through the bazaars in our country, but no one sells the old version and the new one is still quite fresh, so I don't think anyone has done any experiments on it yet.
@@ErCanEverything When asked if you can use your dimensions for the new version, the answer from the author of the picture is: no, this is the old version, the new bushing is 22x9.85 at 18 (According to the anvil).
Nice work! What diameter does the original impact shaft have? And why didn't you reduce the diameter to the original shaft diameter to reuse the original bushing? Is it smaller than the diagonal of the 1/2" square?
I'm glad if you liked it, Thanks.
The diameter of the original shaft is 13.50mm, and the diagonal of 1/2 is 16.90mm.
Can not be reduced more than this size🙂🤝
I don't have the machine but don't know why I watch this. The thing is I already have two impact wrenches 😂
😃
Das sind,,,,,,,,,,,,,,,, keine Schlagnüsse ,,,,,,,,,,,,,,,,oder !!!!! Top WOW !!Video Top ,,,Musik Top,,
Li vendi già pronti per il montaggio? Senza modificarli.
Excellent mod!
Thank you🙏🙏🙏
Please start selling the anvil part already machined on ebay :-P many of us want to upgrade that part to a square drive, and without a lathe only dremel is availible to carve out the case but not the hard anvil :-/
i could not do this with manual tools even if i span it inside a drill and carve it with a dremel it is not precise :-/
Do you have the link? Are you shipping to Europe?
There is a link in the description of the video.
@@ErCanEverything Hi, the link doesn't work
great job, i wanted this upgrade after i broke some hex-1/2 adapters.
the first upgrade i saw needed the impach cone housing to be milled to fit the new piece, but i didn;t want to do that.
could you post all the anvil dimensions? so i can buw what i need from aliexpress.
All sizes of the anvil can be seen in aliexpress. I left a link in the description
the size of the casing was Aprox. 16.30mm, and from there we increased it to 17.00mm
@@ErCanEverything you also machined the casing from 16.3 to 17 ? i don' t see this in the video
@@valipenet Yes, but this will not interfere with the warranty because it is not obvious. I missed that in the video
I think it is an important thing, should be mentioned
Hello, does a complete kit for the transformation exist somewhere? I don't know a milling turner and therefore I can't have washers
I guess not
Can we buy the 1/4 kit, do you sell it?
@@azerty2808 I don't sell them because I'm not a turner. I asked a friend of mine, a turner, to do it for me while I was shooting
Здравейте, ако си взема тази наковалня която е от линка тя ще има ли нужда от допълнителни доработки ? Много полезно видео UP!
Да трябва да се свали размера което изисква нерви от към стругаря защото много е закалено, след това се дупчи от другата страна което съм пропуснал във видеото. Но стругарят трябва да е упорит
@@ErCanEverything няма кой да се занимава толкова за съжаление..Е БЛАГОДАРЯ
I really like the job and I also really want this razor with these upgrades.
But !!!
1. this razor can not be found anywhere (if someone sells it, I take it
2. I would need the dimensions of the new parts for production (it's in the video but my lathe doesn't look like it
You know how to sell it to me for a complete remodel or every special thing.
Link in description
a.aliexpress.com/_veoZ3p
this is processed, you just need to make a new bushing and washers
a.aliexpress.com/_mLLIayT
Fajna solucja
Thank you🙂🤝
Здравей , дали може да споделиш ако имаш размерите на втулката или две втулки необходима и размер на наковалнята за преработването на В3 ?
Здравей, имам снимки със размерите ако искаш мога да ти ги пратя
Чудесна работа ! Как мога да те намеря във Фейсбук, да питам някои неща ?
Във информацията на канала ми има линкове за връзка
Можете да потърсите като Ercan Osman във Facebook
If i buy the new front piece can I send it to you for "cutting" and then installing the park myself home ?
Don't you have a familiar turner, just make you only 2 bushings, and you can file the anvil yourself 1 mm. And you need a 2mm thick washer.
@@ErCanEverything can i some how get in contact with you ?
@@laurentiubuturca Instagram?
Show information on my Channel (Have a link on About my Channel)
Puedes hacerlo con el modelo nuevo?
I still haven't been able to get one, but I saw one on Facebook there are only pictures🙂
Hello, do you sale this kit?
Ahoj, můžeš udělat video s upgrade parkside pdssap c3 nový model, děkuji
Hello.Where can e get the washer and the sleeve?in the aliexspress link that you provide did not come with it.thanks
We made them ourselves in a lathe🙂
@@ErCanEverything but you make them to sell or not?thanks BTW.
No I don't make them, he made me a turner🙂
Is possible to give me the size of that parts sleeve and washer ? sorry to bother you.Also subscribed to your channel ,nice stuff.Thanks man 👍🏼
@@fabiomiguelmartins Main bushing:
19.05 x 17.00 x 13.90mm
Back bushing:
10.00 x 8.00 x 5.00mm
Main washer:
31.00 x 17.00 x 2.00mm
Can you give us a new link to anvil? The old one is not working...☹️
I will update now
s.click.aliexpress.com/e/_EvKYpx3
@@ErCanEverything Thanks a lot! 😃
Is the difference in torque due to the 1/4 adaptor flexing?
Yes, that's right, if you try to unscrew the rim with a 1/4 adapter, over time the hexagon starts to make more clearance, it is even difficult to get out of the anvil.
@@ErCanEverything can 1/4 break if I try to unscrew very tight rim or anything else much tighter?
Изглежда превъзходно.
Наскоро ми попадна същата машинка от франция и чесно казано бях малко разочарован спрямо ревютата които гледах, докато не открих разликата при употреба на ударни вложки.
Аз много съм доволен от ъпгрейда, има почти двойно повече мощност спрямо сток версията.
Преди не успях да развия болтовете на джантите при 226Nm, сега при 180 развива на секундата. Някои ми написаха, че съм ги развил предварително. Но не съм, и нямам полза от това.
Може ли да ме насочите кой може да ми направи ъпгрейда благодаря предварително
Потърсете "Vasil Petkov Kolov" във Facebook
Той намерил по добър и лесен вариант, мисля, че може да ви помогне🙂
Hi kannst du mir auch so ein Set machen? Natürlich nicht umsonst.
Slm, bu yedek parcalari satin alma imkani varmi yani 1/2 Zoll ?
Selam, evet ama sadece ucu satın alınabilir.
Geri kalanını tornacıda yaptırmalısınız.
Uç için linki açıklamalar kısmında bulabilirsiniz.
Evet 1/2 Zoll
Hi do you sell this upgrade kit
Tanks
No, that made a friend in his lathe.🙂
@@ErCanEverything se lo vendi sono interessato anche io
They are not for sale🙂
Daj link do Alexpress, kupie ta końcówkę
The link is in the description
@@ErCanEverything I bought a connector from the description, but the plate hole in it. Need to deepen it?
@@MarioMotoVlog Yes and this must be done
@@ErCanEverything I wrote a private message on instagram. Look
If I buy that part from aliexpress that you linked and I have this Parkside wrench, what steps are needed in order to complete the upgrade? I think this would be helpful to all of us in the comments. Thanks!
Trebuie sa faci 2 bucse si o saiba la strung, dimensiunile le gasesti la inceputul filmului (sau in rapunsul autorului la intrebarea lui Fabio Basta)si gaura din carcasa ( pe unde trece axul) trebuie majorata la 17 mm. Ultima informatie nu e in filmare dar apare in raspunsul autorului catre Vali F, imediat dupa intrebarea ta.
@@horiachiorean8592 multumesc frumos!
Deci reduc diametrul piesei pe strung de la 18.00 la 16.90, fac saiba si cele 2 bucse si maresc diametrul gaurii din carcasa la 17 ca poata trece piesa de diam. 16.90 prin ea. Vad ca el preseaza a 2-a bucsa (back bushing din video) in piesa principala ca sa reduca diametrul interior. Stii cumva daca se poate fara presa?
@@georgecimpoies poti sa o bati sau sa-i ceri strungarului s-o preseze el.
Unfortunately, this is not true. I ordered from your link does not fit it does not fit the ring is too small no reduction provided. The hole in the cutter is too small and it is impossible to translate the tip. Even the socket holder cannot pass through the dedicated hole. Fake
In the video everything is correct.
I only missed 1 detail, finally the base of the anvil is hollowed out so that the hammer enters tightly to it.
And one more thing, the top of the aluminum casing expands to 16.9 ÷ 17.0mm
In the video, maybe yes, but this adapter from the auction has 18mm on the base and the hole at the capping machine is max 15-17mm even without the sleeve you are making. I don't know how you put this adapter inside the cap.
First reduces the size of the anvil from 18.00mm to 16.90mm
Increible!!!
Se puede hacer con el nuevo ?ruclips.net/video/dvR19oChg8g/видео.html
Can you make a kit like this for me? I got the same impact wrench, im from Spain, send me an email if you can do it