Modified 1/2 Parkside Performance PDSSAP B3 vs Normal PDSSAP B3 vs beech tree
HTML-код
- Опубликовано: 3 дек 2024
- Got my hands on this modified version of the Parkside Performance impact driver PDSSAP 20-Li B3.
You can get more info on the modification from: www.facebook.c...
The anvil has twice the mass of the original. Lets see if there is an improvement in the delivered torque.
a few years ago I was the first to make modifications on RUclips, I made the green, black A1, B2 and B3 versions. Everyone wrote to me and downloaded.
normally it would not be too difficult to get the stuff out of the case, but with that black tip I don't think it works. The black Tip seems to be bigger in diameter like the case. And it's a bit stuck as well. can you help?
thanks!
@@dersteirer74 w ewwfff
Can you give Information on how to modify impact b3, I bought an anvil, what else is needed to modify?
Vorresti un premio per questo ?
@@dersteirer74I hope you managed to disassemble the tip 😅
This vs 1/2 12v prototype?
Hello!
Can you leave some infomation about the person who made this modification ? Nothing on the description..
Thanks !
Sorry about that. This is the person who made it: facebook.com/profile.php?id=100077573599817
Can you test vs c3 model? They are going to release a new model (d4 or similar)?
Thanks!
Un informazione deve hai trovato l’attacco da 1/2? Mi puoi girare il link grazie
ruclips.net/video/k-mCfn0YsTw/видео.htmlsi=g4Y_jkafQRmcGkH5
¿Pero cómo es posible que un destornillador de impacto con 226 N.m no pueda meter esos tornillos? Cualquier taladro mediocre de mucha menos fuerza podría hacerlo sin problema.
Pretty hard wood you have there. Is it beech?
Exactly - its beech :)
@@icku Oh sorry, youtube automatically translated half of video title and I didn't notice this. :p
Beech is pretty damn hard, but still a little bit disappointing result.
Yep, it was the hardest I managed to find in the local store
Колега ако имаш възможност направи тест на двете машини при ползването им като гайковерт. Да видим каква е разликата с това да ползваш ударна вложка с преходник и вложка директно сложена на новия шпиндел. Тези наковални комплект с втулките ги продават за 50-тина лева вече, отделно гаранцията отпада...да се види струва ли си човек да я прави тази операция или разликата е минимална.
Върнах машинката на собственика и вече. По скоро въпроса, който човек трябва да си зададе е колко често ще я ползва като гайковерт. Защото тези адаптери от шестостен към 1/2 не са стотинки, а аз лично ги чупя доста. На Milwaukee адаптера е 7 лв. Да счупиш 5-6 такива и ето ти една сумичка.
where do I get the anvil? I ordered one off ebay but it's too big. the original one has a diameter of about 13,7 mm, the length of the "bearing" surface is 11,68 mm long, length of the hammer is 39,9 mm, thickness is 5 mm. the axle of the spare one I got is way too thick. I probably take it to a metal shop.
Yep, its not straight swap. You need to do some work on the tool.
Имате ли телефонен номер на човека който продава изделието защото във фейсбук не отговаря?
Where i Buy the Adapter
Normally it should not be difficult to get the anvil out of the case. But here it's kind of stuck, and the front tip probably wont go through the case. Any idea how to change it? I want the 1/4in. anvil so I don't need the adaptor. thanks,
sorry I did not see your comment. I tried to change the anvil but I had the wrong spare part. You have to get out the washer spring in the anvil first. Then disassemble the anvil, there is a little ball in there, a washer, a spring and a washer. Then, it is not a problem to get it all out. the problem is, I have no idea where to get that part. It is stupid that one has to use an adaptor, just broke one.
seems there is no plug and play, here is the mod with the previous model ruclips.net/video/BII2uXiqXc4/видео.html
ruclips.net/video/k-mCfn0YsTw/видео.htmlsi=g4Y_jkafQRmcGkH5
Can you give Information on how to modify impact b3, I bought an anvil, what else is needed to modify?
Everything is in RUclips and AliExpress 😉
Bonjour
Comment se procurer l'embout 1/2 ?
ruclips.net/video/k-mCfn0YsTw/видео.htmlsi=g4Y_jkafQRmcGkH5
Are you going to sell that adapter?
I also got one and it's very annoying because it always breaks the hexagonal ones
ruclips.net/video/k-mCfn0YsTw/видео.htmlsi=g4Y_jkafQRmcGkH5
Takže půjde koupit tato upravená verze nebo je to jen na nějaké zkoušky ?
stačí počúvať čo hovorí vo videu... každopádne v komentoch je kontakt na týpka ktorý vyrobil tento "mod" lebo to nieje original od parkside ale prestavba... každopádne vyzerá to docela zaujímavo len nepochopil som z toho facebooku čo je v komentoch či týpek predáva len tú "súčiastku" alebo prerobenú celú uťahovačku
Where do we buy the kit from?thx
Its not a kit. You can buy only the anvil, but you need to remanufacture the bushing to fit.
@@ickuwhere do we buy the anvil?
@@TIGFab97 It's not unusual thing very hard to find, just write it in some auction sites
This is the guy who made the mod, you should ask him: facebook.com/profile.php?id=100077573599817
Test with bolts is missing because the main reason why anyone would do this modification is to use this driver as an impact gun with co-mo sockets.
ruclips.net/video/k-mCfn0YsTw/видео.htmlsi=g4Y_jkafQRmcGkH5
Compare it with 12v
Hi, nice upgrade :). I saw similar on one of the Polish channels, but the person who modified it did not do any test concerning the torque. I myself am planning to do it rather for the purpose of using 1/2 sockets without any adapters, but the higher torque is a most welcome side effect ;). Did you maybe bought the anvil from our Asian friends from the "A" portal ;)? They have a lot of them for sale with different sizes. Any chance you could tell the size of it? The anvils they offer are rather cheap, I wonder how long they will last.
facebook.com/profile.php?id=100077573599817 - this is the person you need to contact as the mod wasn't done by me.
Nie każdy ma dostęp do takiego sprzętu, zaś kupno mija się z celem, żeby kanał zarabiał bądź miał sponsora to co innego. Kilka lat temu zrobiłem zielony model, później czarny A1, później B2 I B3 , pokazałem to ludziom, do dziś piszą, żeby robić tulejki i Adaptery. Kto chciał to uwierzył, że roznica jest, teraz kolega to potwierdził.
ruclips.net/video/k-mCfn0YsTw/видео.htmlsi=g4Y_jkafQRmcGkH5
Колега как може да се свържа с теб, искам да тествам тунингована версия на версия С3 :)
Какво имаш предвид под тунингована? Сменена наковалня? Драсни на krasii86@abv.bg, пък да видим.
i'm sick of breaking adaptors, so i bough dewalt anvil (8mm inside hole and better locking mechanism) and plaling to this anyway
Does it fit?
Hey man. You used this replacement anvil on this particular Parkside model (the one in the video)? I have the exact same one and would be really grateful if you could provide the link to the anvil you talk about. Does it fit without a problem?
Sono interessato anche io a sapere se è adattabile il dewalt
ruclips.net/video/k-mCfn0YsTw/видео.htmlsi=g4Y_jkafQRmcGkH5
ruclips.net/video/k-mCfn0YsTw/видео.htmlsi=g4Y_jkafQRmcGkH5 @@dlaczegotakpowazny1474
Это какой-то пиздеж он закручивает эти саморезы без напряга =)))
Scoate fum 🚬 😅
Hello where do we buy the anvil ? thx