How to Replace Front CV Axle 2000-2006 Chevy Tahoe
HTML-код
- Опубликовано: 15 сен 2024
- Buy Now!
New CV Axle Assembly Set from 1AAuto.com 1aau.to/ib/1AAC...
New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAC...
A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one in your 2000-2006 Chevy Tahoe.
• Check here for more videos on the 2000-06 Chevy Tahoe • Chevy Tahoe 2000-06 2n...
This repair was done on a 2005 Chevrolet Tahoe Z71 5.3L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe
Tools you will need:
• Pry Bar 1aau.to/ogT/1AX...
• 14mm Wrench 1aau.to/ohj/1AX...
• 14mm Socket 1aau.to/oyt/1AX...
• 15mm Socket 1aau.to/oyt/1AX...
• 22mm Socket 1aau.to/obJ/1AX...
• 36mm Socket 1aau.to/oy/1AAS...
• Air Compressor
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ob6/1AX...
• Torque Wrench 1aau.to/opQ/1AX...
• Gloves 1aau.to/oc8/1AX...
• Safety Glasses
• Assistant
Subscribe: / @trq
Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation: • Chevy Tahoe 2000-06 2n...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Love how this guy is very calm and collective demonstrating the knowledge needed .
These axles can be pulled on the ground with the wheel on. All you have to do is pull the bottom bolt out of the shock remove the six 15 mm bolts from the inside of the axle and the 36 mm nut on the end of the axle. It will pull right out the bottom.
You guys are the best. Every video has all the details you need to know. From the tools you will need to the torque of each bolt and pattern of torque. Time saver. Thank you guys. Keep up the great work. God bless America.
Great video, I had already done the hubs and my CV joint has started to go bad, figured I had to take the hub and everything back off but man that looks so much easier.
Very helpful and understandable
+JOHN TATE Thanks for watching our video! 1aau.to/m/Shop-TRQ
Thanks for the video. I’m going to be changing mi e on my 04 Yukon because the bearing fell apart on the highway the other day…
Swear that’s the loudest torque wrench ever 😂😂
Thanks for video. aren't you the same guy from 1A Auto ?
Totally. Glad I’m not the only one that noticed.
Thank you, just the video I needed to change the axle on my 02 avalanche
Great job, thanks. Subscribed.
I know this is a thousand years old but if I'm replacing axle and wheel bearing hub assembly, which one would you put on first when installing them? Should I do the wheel bearing first or axle first.... I was thinking do the wheel bearing first!
Great job
Got a 2000 escalade driver side cvboot torn and silver balls fell out , 4wd doesn't work on that side but still drives , replacing the axle Friday , will it damage more if I drive it at 55mph till then ?
I'd wrap the pry bar with a rag before using to hold the hub assembly on those stud threads or at least be very careful
Do you need to have an alignment after this job?
No- nothing you replaced is adjustable.
My hub would not spin freely after installation. it turns 1/4 of a turn then stops and its very hard to pass that point. then turns free for another 1/4 of a turn then stops again. do you have any idea of what is causing it?
What size bolt in mm is the bolts that hold it to the axle?
Awesome
Why is it necessary to remove sway bar link?
Its not. Just an extra step. He probably gets paid by the hour
Just makes it easier to get the axle out when it’s not in the way.
My truck don’t have the nut going to the middle of hub so what should I get?
Thanks for the great video but the sway bar link doesn't have to come out
Sway bar link doesn't have to come out to sunbolt the axle and then slide it out and Slide the new one in most likely if you take the sway bar link apart it's going to break especially in the Rust Belt states
On my 2000 GMC 1500 I no way had to remove the link. 1 big 36mm nut and 6 15mm bolts. Out with the old and in with the new...30 minutes. But thanks for the video just the same.
+@SuperdogRW713 Thanks for the feedback! 1aau.to/m/Shop-TRQ
Can u just change one...or do u have to do both at same time?
+Crypto Currency thank you for your question. It is recommended to replace both sides of the axles since you will need an alignment any time you replace suspension parts.
Don’t have to remove stabilizer link . Broke mine for no reason.
Can you drive without the cv axle on
58 ft lbs, 89 inch pounds, 177 ft lbs, 140 ft lbs