How to Calibrate the Bidirectional UV printer Refinecolor Hosonsoft printexp by Jays printers

Today I will show you how we calibrate the Bidirectional for the Refine color UV printer that is running Hosonsoft Printexp riprint software this will work with many versions just the buttons are in a different location you should be able to get it from mine
link to my machine that I use
jaysprinters.com/products/609...
Link to our inks
jaysprinters.com/products/uv-...
my personal Affiliate link
jaysprinters.com/Mrjaysperson...

[@karabritch7834]

Great info!

[@zaratesteelworks]

Your videos have been so helpful I just got my dtf the next version up but I had no idea what I was doing even after the initial setup it wasn't right and this helped alot

[@JaysToDoList]

Thank what brand did you go with we also have dtf films and inks in stock in the usa if you need jaysprinters.com

[@divingmissdaisy2007]

Thanks Jay!

[@MattLong6]

Why is my printer getting streaks. Like it prints the color, but 1 or 2 swipes are a slightly different color.
Only 1 or 2 streaks, the rest of the print, the color is perfect.

[@JaysToDoList]

This sounds to me like morning start up. does this Happen every time or just first print? When not used for a time the ink bleeds the channels together and thus mixed the ink for first startup I suggest doing a 2 sec load then a weak clean then another 2to3 sec load and weak clean. If you load the ink more then 2to3 sec it over fills the cap and will mix the ink mix again in the print head
Just make sure your nozzle check is good before you print

[@RLeeVisuals]

So when I start my printer, the head slams into the right side wall and it’s not even being registered by my computer on start.

[@JaysToDoList]

This might be a firmware issue ask your manufacture to send it to you