Core, Types of Cores, Core Prints and Chaplets in Casting Process Lecture by Shubham Kola

Subject - Casting Process, Manufacturing Process
Chapter - What is Core and Types of cores [Green Sand core, Dry Sand core, Horizontal core, vertical core, balance core, Hanging core, drop core, kiss core] Core prints, Caplets in casting Process
Timecodes
0:00 - Introduction
0:13 - What is core?
0:21 - Types of Cores
0:39 - Types of Dry Sand Cores
0:47 - Horizontal Core
0:57 - Core Print
1:12 - Vertical Core
1:17 - Balance Core
1:32 - Hanging Core
1:46 - Drop Core
1:55 - Kiss Core
2:11 - Chaplets
#Types_of_cores
#core_prints
#Casting
#chaplets
#foundry
#TypesOfcore
#Casting_Process
#Mechanicalengineering
#GATE
#Manufacturing
#Mechanicallectures
#NPTEL
#Mechanical_Engineering
#Manufacturing_Process
#Metal_casting_Processes
#shubhamkola
This Video Topic is from Production Engineering Subject, you can also watch below mentioned videos related to Production Engineering Subject:
Lathe Machine Operations - • All Lathe Machine Oper...
Metal forming Operations - • Bending, Drawing, Slit...
Drilling Machine Operations - • Drilling Machine Opera...
Forging Operations - • Compare Open die forgi...
Press Working Operations - • Blanking, Piercing, Pu...
Twist Drill Tool Nomenclature - • Twist Drill Tool Nomen...
Single Point Cutting Tool Nomenclature (Tool Signature) - • Single Point Cutting T...
Types Of Drilling Machine - • Types Of Drilling Mach...
Extrusion Process (Direct and Indirect) - • Extrusion Processes: D...
Extrusion Process (Hot and Cold) - • Extrusion Processes: H...
Rolling Process - • Rolling Processes: Hot...
Plastic Injection Moulding Machine - • Plastic Injection Moul...
Centerless Grinding Machine - • Centerless Grinding Ma...
Capstan and Turret Lathe Machine - • Difference between Cap...
Column and Knee Type Milling Machine (Horizontal Type of Milling Machine) - • Column and Knee Type M...
Horizontal Broaching Machine (Pull Type Broach Nomenclature) - • Horizontal Broaching M...
Plano Miller (Planer Type Milling Machine) - • Plano Miller Machine: ...
Types of Robot Configuration - • Types of Robot Configu...
Degree of Freedom in Robotics - • 6 Degree of Freedom in...
SCARA Robot Arm Configuration in Robotics - • SCARA Robot Arm Config...
Gas Welding - • Gas Welding Basics: In...
Arc Welding - • Carbon Electrode Arc W...
Gating System in Casting Process - • Gating System Parts in...
Plastic Moulding Methods - • Plastic Moulding Worki...
Pattern in Casting Process - • Pattern Types and Mold...
Moulding Process - • Bench Moulding, Floor ...
Core, Types of Cores, Core Prints and Chaplets in Casting Process - • Core, Types of Cores, ...
Cupola Furnace - • Cupola Furnace Working...
Electrical Arc Furnace - • Electrical Arc Furnace...
Centrifugal Casting - • Centrifugal Casting Pr...
Investment Casting or Lost Wax Casting - • Investment Casting Pro...
Your Queries :-
What is core
What is core prints
What are the Types of core
How hole is done in casting product
What are the Types of dry sand cores
What is horizontal core
What is balance core
What is purpose of core print in foundry
What is green sand core
What is kiss core
What is drop core
What is chaplet in casting
What is the use of core and core print in casting process
Faculty - Shubham Kola ( BE Mechanical Engineer )
Email ID - [e-mail]
From - Maharashtra ( India )
RUclips Channel ( Shubham Kola ) - / @ifinfotech
Disclaimer -
video is for educational purpose only. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use. The content in this video is collected from books, media, internet space etc. This is strictly for educational and information purposes and is not intended to be advice or recommendation of any kind whatsoever. The faculty is not a subject expert. The faculty is sharing his knowledge in the form of videos. The faculty giving small basics information on mechanical engineering topics. We endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the video or the information, related graphics contained in the video for any purpose. any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arise out of, or in connection with, the use of this video.
(*The music used in my video, is not owned by me!*
Source*RUclips Music Library)

[@pujithavanapalli8908]

Well explained in less time.....thank you

[@ifinfotech]

You are most welcome🙂

[@dr.jahiershaaikh3827]

Thank you, Professor!

[@ifinfotech]

You're most welcome🙂

[@vattikalasatyanarayana8137]

👌👌👌🙏🙏

[@yanamalanithin9780]

Bro your explanation is good but go slowly and some more detailed.......

[@ifinfotech]

Ok next time

[@kushagragupta4381]

Perfectly structured!

[@itsme-pc6iw]

Bhai plz go slowly 😔