Have you heard from Shurap.... I hope you and your family are safe I am sure a lot of your viewers watch his channel as well.... I would really like to know that he is OK
@ Nigel Smith Was just coming here to ask that as well. Crazy that two of my favorite of my favorite YT knife makers are both from over there. I know Shurap is or was in the Sumy area.
@@jistyclovek4693 because it's the easiest way to make knife steel 😂 no offense he makes great knives but to me technically it's not wootz it's just modern steel melted in a crusivel.
@@knifethrower9733 It is not that easy to just melt steel in crucible - make damascuc steel (i meen modern patern welding, not original wootz damascus) is easier than this. You need right tool and knowlage to "just melt modern steel in crucible" yes it is not original wootz recepture but it is crucible steel - not something magical or mystical, but wel proforming cool pice of exotic material that you donť see every day. Sory about my english I am Czech and I am too lazy to use translator :)
How do you determine what material to use. It seems that you can make a knife from any metal but what gives them a certain Rockwell hardness. Does the forging make any metal hard enough. I know in the world of knives different steels hold an edge and are easy to sharpen. Can you forge these characteristics from washers etc. Your knives could slice a hair off a gnats butt from any metal. How?
Thanks for sharing this video with everyone I think I am going to have to give this design a try and see if I can make it happen for me and that is an awesome looking knife great work
День добрый. Возмодно я не первый с таким вопросом,но всё же. Для чего Вы используете для заполнения горловины тигля графит и стекло? Это чем-то помогает или просто так?
The bar you used when sanding down the top near the spine, right before etching... what is that? Is it just a custom bar that you put sandpaper on, is it a specific type of file, or what is it? I am curious as I would love to acquire one for myself. Great videos!
Thank you all for watching the video. Do not forget to comment and subscribe to the channel. If you liked share the video with your friends
Do't worry man...... It's our job🥰🥰
Have you heard from Shurap.... I hope you and your family are safe
I am sure a lot of your viewers watch his channel as well.... I would really like to know that he is OK
Dffggg😁
@ Nigel Smith
Was just coming here to ask that as well. Crazy that two of my favorite of my favorite YT knife makers are both from over there. I know Shurap is or was in the Sumy area.
Please make a knife with titanium
You are the one youtuber I can find that does Wootz steel on a regular basis. Thank you for doing it, wootz is me favorite.
Thanks
Yes, no one else does this, you are amazing
@@jistyclovek4693 because it's the easiest way to make knife steel 😂 no offense he makes great knives but to me technically it's not wootz it's just modern steel melted in a crusivel.
@@knifethrower9733
It is not that easy to just melt steel in crucible - make damascuc steel (i meen modern patern welding, not original wootz damascus) is easier than this.
You need right tool and knowlage to "just melt modern steel in crucible" yes it is not original wootz recepture but it is crucible steel - not something magical or mystical, but wel proforming cool pice of exotic material that you donť see every day.
Sory about my english I am Czech and I am too lazy to use translator :)
@@jistyclovek4693Niels Provos youtube.com/@NielsProvos
I’m always so impressed by you skills, and I never see a crack or overheated problem, my deepest compliments
Another awesome knife. You make it look so easy. Thanks for sharing.
Thanks 👍
Красивий ніж. Дякую за досвід.
You know what FZ I take my hat to you for this amazing work buddy
Thanks 👍
Another wonderful knife. Thank you for sharing, hoping you, your family and friends are all safe, and that it will be over soon.
Thank you for your words of support
Looks like a Barber's razor , beautiful workmanship .👌
Thanks 👍
OMG that is beautiful. Plus it was from a Wootz. Also that pattern was awesome.
wow thats a darn good looking folding knife
Thanks 👍
That turned out fantastically, love the flow of the lines
Thanks 👍
I have no words, this is so incredibly perfect - a real knifemaking mastery!
Thanks 👍
I'm going crazy , your work is great ,man .
Masterpiece of a Folding Knife !!!!!!!!!!!!!!
Thanks 👍
woww maha karya yang sangat keren banget
jangan lupa untuk ngopi sobat
salam dari kami
Absolutely gorgeous knife😍 great clever look to it!
Thanks 👍
What do you use for sharpening and hand sanding your knives?
I sharpen with diamond stones. Hand polishing with diamond paste
@@fz-makingknives3663 do you use one kind of grit on the diamond stones or do you use multiple grits
How do you determine what material to use. It seems that you can make a knife from any metal but what gives them a certain Rockwell hardness. Does the forging make any metal hard enough. I know in the world of knives different steels hold an edge and are easy to sharpen. Can you forge these characteristics from washers etc. Your knives could slice a hair off a gnats butt from any metal. How?
Як завжди гарна праця!!! 🇺🇦✌️✌️✌️
Another beautiful knife FZ.
I JUST FIGURED OUT WHY YOU ARE SO GOOD IN MAKING SUPERB KNIVES,YOU ARE YOUR OWN BOSS AND THERE IS NO ONE THERE TO RUSH YOU ALONG..
Another great knife thanks for sharing it with us all till next time stay safe
Thanks
What an amazing from scratch to this beautiful knife
Thanks 👍
Do you make your own crucibles, or do you purchase them premade?
As always, you amaze us
Thanks for sharing this video with everyone I think I am going to have to give this design a try and see if I can make it happen for me and that is an awesome looking knife great work
Absolutely gorgeous 👌✌️👍
Very nice build.
Thanks 👍
What a beautiful knife, thank you.
Thanks 👍
Lordy that is beautiful!!
Отличная работа!!!
What a beauty!!! Awesome 👏
Thanks
Folding "chopping knife"???
Looks like its perfect for my right pocket...really beautiful, real knife!
Thanks 👍
What is that past your putting on and that sanding block? Pretty cool.
Классная работа 👍👍👍
Great Job.
Great knife.
Thanks
Thanks 👍
Absolutely beautiful !!!
Thanks 👍
Nice job!
Thanks 👍
beautiful knife good job well done mister
Thanks 👍
Beautiful! I hope you and your families are all safe from the orcs
What is the handle made of? Any link to buy that handle material along with grommets? Please reply.
Hello and thanks for the great job. what are the materials added to the ball bearings at the start of the video?
Amazing 😍and the colour compilation it’s awesome 👏 well done sir 👍👍👍👍👍👍
Thanks 👍
Do you make the crucibles you use or do you buy them?
We make ourselves
Buen vídeo amigo, y bonita navaja.
Beautiful knife. Great job.
Thanks 👍
The knife is greatly 🔪❤️
Thanks 👍
Very nice knife..
Thanks 👍
How long it took to melt?
two hours
Could you pls leave a link to where i can buy FireClay.
Do you use charcoal or coke for melting?
Спасибо. Как всегда на высоте 👍👍👍👍👍
That isa gorgeous blade
How far apart did you drill the holes in the blade? The dimensions.
Bellissimo ottimo lavoro. Bravo!!!
Thanks 👍
Magnifique couteau bravo monsieur
Thanks
awesome folder
Thanks 👍
День добрый. Возмодно я не первый с таким вопросом,но всё же. Для чего Вы используете для заполнения горловины тигля графит и стекло? Это чем-то помогает или просто так?
Gorgeous work!
Thanks 👍
It may have been asked before but what is the metal and past used to sand/polish the blade?
Does this knife have a price tag and with that being said do you still have it?
This knife has already been bought. I can make to order ...
Go! FZ! Go!
What is the tool you're using to polish the bevels? Just curious.
what is that orange liquid ?
ferric chloride
Stunning knife as usual!
Thanks for sharing your talents!
Question:
What are you adding after the bearings when you fill the crucible?
А для чего стекло добавляете?
always great! 🇺🇦❤
Thank you 😊
how did the grease inside the bearings not turn into a defect?
Beautiful as ever
Thanks 👍
@@fz-makingknives3663 i want to show the knife i make aswell
можете показать , рассказать как у вас устроен поддув в плавильной печи, вы используете топливные пеллеты для плавки, коксующийся уголь пробовали?
That's really beautiful!!
Thanks
Awesome Design !!! 👍🏻👍🏻👍🏻😎
Thanks 👍
Комментарий в поддержку канала и ролика, а также труда мастера.
your work is amazing
Thanks 👍
Another beauty
That's an awesome knife, I'd really like to have one...and also one in Damascus...
another piece of art. thank you for very interesting video
how do you make your crucible? is it possible to share the process please?
If you place cardboard between the crucible and the fire brick, it will keep it from sticking.
I think no
@@fz-makingknives3663 It creates a layer of carbon that the stone doesn't stick to.
Я думав ви з америки. А ви з україни ❤️
👍
Beautiful. I want one.
👍🍻
Très beau couteau
Bravo 🔪 🔪 🔪 .
Good job
Thanks 👍
Beautiful!!! long live Ukraine🙏
Thanks 👍
Do you do costume knifes?
Very Nice
Thanks 👍
Excuse me, I'm curious what ingredients your container for melting your material is made of, can you tell me? thanks
I believe it's steel, graphite and glass
Do you make chef knives?
Yes
Hey man... how are you holding up?
Everything is ok, thanks.
@@fz-makingknives3663
The wife and I are keeping you in our thoughts and prayers!
Thank you very much for your support
Beautiful!
The bar you used when sanding down the top near the spine, right before etching... what is that? Is it just a custom bar that you put sandpaper on, is it a specific type of file, or what is it? I am curious as I would love to acquire one for myself. Great videos!
Thanks 👍
@@fz-makingknives3663 The first part was a question, did you see that? About the bar you used?
This is cast iron grinding and diamond paste
@@fz-makingknives3663 Thank you so much! It appears as if it makes buffing a little easier :-)
So much effort for cutting paper 😂
Nice Work
👌👍
love your knives i am curious if you take design requests?
bartosr777@gmail.com
Criminality 🤣
But you're really professional. 👍
Thanks 👍😊
Sencilla y espectacular 👏👏👏👏
nice .....beatiful
👍 great bro
Thanks 👍
أين يمكن ان أحصل علي هذا السكين ،
وكم سعر هذا السكين ؟
This knife looks super cool, may i perhaps get the design template
Có bán không? Mua như thế nào?
Nice work man! Where do you buy your crucible?
Шедевр!
гарна робота! скільки б коштував такий ніж?
You should go in forged in fire challenge to win 10k $. 👍🏻
Ok)