12:20 Dude you're the best, you have no idea how long I've been looking for a solution like this. You not only installed it quickly but showed exactly which part was needed and how it works. I wish there were more people like you. Thank u so much dude. Sorry for my poor englisch 😅
wow great vid. love your pace and humor. you waste no time while ‘zooming’ in on the important parts. also nice production touches. i’ll be looking for more of you! thx!
Yes, heater I would say is one of the most important items for a Canadian van build. Thanks for watching, I can’t wait to get out and enjoy the fruits of our labour as well!!
@@DaresDrives hey thanks for putting this together for us - question why the JCI adaptor to the JCI to barred - the barred fitting could be threaded and sealed directly to the JCI Bulkhead no ? Thanks again
These were the first videos that got me to your channel. I've since gone back and watched the whole series and am back to the hydronic install. Love the content Jeff!
I think that the mounting screws that came with the machine are tri lobular thread forming screws. These screws form the thread as you drive them in by mushing the Aluminium up. Very common for die cast Aluminium housings like electric motors.
Very informative great for anyone building their own van incredible amount of research you have excellent problem solving skills and product knowledge 🚐
Dave, Super helpful video! Thank you for putting it together. I just ordered a Rixen sy. for my gasoline Promaster. I am doing a very similar set up except adding radiant floor loop. Thanks to you videos I was able return a US $650 IsoThem hot water tank, and save a ton of space. Thank you! -Eric
Thanks for the tip on the fittings! below! 1516BH-12-12 male npt x male jic (2) G22BFS-075-075 Brass female npsm (4) 0516-12-12 male npt x female jic (2)
Yes, this is why we had to prolong our video timing for a little while. Lots of projects on the mind and adding in the videos is going to give me grey hair!! Haha. Thanks for watching, glad you enjoyed!
Nice install and love the floor passthrough solution. Tip, might want to drill a small drain hole on the bottom of the muffler as the stock hole is on the other side of where the mounting bracket hole is, so...pointing upwards in your install.
OOOO, Good call, never even crossed my mind on that one.. Heading out right now to look at this and correct.... Thank you for watching and commenting...
This video is a lifesaver! I've been stressing about this install -- we have the same heater and the same van. Looking forward to part 2, thank you Jeff!
Very clean build! I am slowly making it through the entire build series. I thought on these burners that there was a required orientation with the exhaust down so you do not collect condensation. Is that burner in one of those approved orientations? Thanks!
That was a tough one to film! Great work though, I could still follow along. I find that these projects on other channels I just tend to completely lose track of what's going on and end up guessing, this didn't happen here! All of these tubes and wires are a lot to keep track of, I can only imagine the amount of time you spent on this...
HAHAH yes it was a difficult one for sure... Hope it was able to make enough sense to keep your interest level up... Thanks for watching and commenting!
Can you install the glycol container and hot water heat exchanger under the chassis rather than in the van? My van is smaller than yours and I'm trying to figure out where to put these things ...
Thanks much! My furnace is under the van just behind the driver’s seat. I want to run the glycol hose to the other side, over the exhaust. What do I need to do to protect the hose from the exhaust? Is there a minimum distance to maintain. Do I need to shield the hose somehow? If shield, any suggestions?
You probably noticed the factory fit heaters air intake goes into the frame rail, that is supposed to provide silencing and protection from water ingress so you could try doing that if the noise from your second one gets annoying 😀 How’s the exhaust and heater coped close to the wheel any excess muck or damage to either? I am curious because I am still deciding where to mount mine. Thanks
How big is the coolant resevoir? And what would you say the minimum size reservoir I could get away with. Also do you have an overflow? Are you running glycol?
Just found your video on diesel heater / hot water? So if I am in the desert, need hot water heater not hot air??? 🤷 any ideas? I only have diesel and 12 volt DC????
Have you run the hydronic heating in Van yet? Can you make an estimate of how much fuel heating with hydronic system takes and rough temperature outside when you did test? From Rixens literature is says 0.15 gal/hour. For air heating only system takes only 0.042 gal/hour. Seem like a lot of fuel (4 gallons a day) or does heating cycle so much less fuel is actually used.
Hi Jeff, great introduction...what you do to bring us together❄️☃️ 😉 This is truly a custom build and I’ve enjoyed every moment of it, your teaching and communication skills are on point, plus the visual of application. Thank you for starting your channel and your determination to entertain us ( you know you are😁) we get all the good stuff, thanks again Master Peep you’re a 🌟 See ya when I see ya 👋🏻 Take care of yourself and god bless you ❣️
Hello my #1 peep, thank you so much and super happy you enjoy the videos. Not easy to make them informative and interesting but I feel we are walking the line and will be just fine. Thanks again, see you on the next video!
Jeff- Thanks for documenting your build, it is a great resource for me so far. I appreciate the way you explain what you are doing , then show us. Can you share the part numbers for the through floor fittings? I searched for "jci" on the web site provided but could not find them. That way I can cross reference them to a site here in Oregon.
I found them in "JIC" but would also appreciate it if you shared the exact parts Jeff. In the states I am looking at ordering through titan or hydraulics direct
Thanks for adding the part numbers to the page, great big thanks!! BTW, when ever we can travel to Canada (and my Van is complete ;)), we have friends that live in a small town very near Calgary and we plan on visiting, it would be great to have a beer with you!!
Thank you for your video, that's the perfect one that I have ever seen. By the way, the reducer(from 4:10 to 4:20),is it 5/16 to 1/8 or 5/16 to 1/4? Where did you get it? Thank you.
I just finished installing my D6L heater (looks the same as the one you have), and the manual states the the bolts that come with the heater is self tapping, so no need to tap the holes before screwing in the included bolts :)
This is a true story that i learned after tapping the holes and making the video... No harm done though achieved the same end goal!!! Thanks for watching and commenting.
@@DaresDrives I think we all learn a lot during such build, having very little practical experience I know I do :) As you say, no harm done. Now if only I could get my water pump to be just half as quiet as yours I would be happy :)
Best educating video in building RV (when I saw your first video I subscribed immediately) . Awesome job, I like your tent attached to van allowing you work at winter , rain. Is there any video of the tent you built around entrance to the van? Thank you my friend.
Wow awesome thank you and welcome to the Dares drives crew, Yes there is a video in our Sunday stories playlist that shows the full set up of the unit... Hope it helps and thank you for watching and commenting!
Your heating system intrigues me. We just purchases a 2020 Ford Transit and it is being outfitted with 4-wheel drive. Can you give me an approximate cost of this system for hot water and space heating. Thanks
Give Rixens a call as they price can vary depending on your set up.. But I will warn that it's probably the most expensive option out there yet the advantages far out weighed the cost when thinking safety and long term value...
Your videos are addictive. Great job. Question. Doing a frame off restoration on my (hand-me-down) 1975 GMC motor coach. Gasoline engine. ESPAR heating system? Do they make gasoline heaters?
Perfect, thank you... I believe they do, but it wasn't something I research much as it wasn't one of my builds requirements... Thanks for watching and commenting.
Your videos are very entertaining and most of all I think you put a lot of thought into your modification decisions. Have you got the Espar fired up yet? I am curious if you have found extra noise by mounting to the inside body panel. It is quite hollow and sounds drum like when tapping on it. I am considering using self tappers into part of frame structure because of the acoustics. What do you think?
Nate Marine hello and thank you for watching, super happy you enjoyed! Yes acoustics were a concern during the plan for this step, seeing the factory engine espar heater is mounted to the same location just further up the van and it is not loud at all I assume it should be the same for this unit. I have not tested it yet but will have a video about it once we get to that step. The frame may be a little more solid but is still hollow so not sure it would make much of a difference. But I don’t have real life experience to share unfortunately. Thanks for watching and commenting!!
Hey Jeff, I'm curious why did you put the intake of the air filter right up against the frame of the van? Wouldn't that block the airflow needed for the furnace to work well?
Hello the inlet does not actually touch the frame, there is a 1.5" gap for air to enter without restriction.. My Instagram has a few better photos of the mounting position. Thanks for watching and commenting.
@@DaresDrives that makes more sense now, thanks for the response! I'm actually mounting mine under my can this weekend. I can see with the sprinter you have a lot of mounting options. On a Promaster it is going to be interesting haha. Keep going on your build man, it looks gorgeous so far. Also, your outro sounds are freaking awesome!! "Perfect!" 😎
Excellent videos Jeff! I really wanted one of these units in my van build but I was a bit intimidated by the idea of DIY. You make this easy to understand and I am now inspired to move forward with this! Might I ask how you placed your order with Rixens Enterprises? Did you have to order all of the components separately or did they sell it as a kit? Again, thanks for sharing your experience!!!!
Glad you are enjoying and they are bringing value. I just called them and ordered up. Yes it is sold as a kit just tell them what you want heated and they will take care of you.
Does anybody do a video on the wiring as I bought this heater through Amazon and no instruction as well as a lot of parts apparently. Most important was no instruction manual. Using it for in floor heating and hot water/recirculating shower in cargo trailer conversion. I also have forced air diesel heater now up and running.
I did an earlier video about the pre-wiring of the unit as well just finished our completed install which shows wiring on new upgraded system.. Hope it helps. thanks for watching and commenting
Thank you SO MUCH for creating a hydronic how to video, I recently bought one for my own Sprinter build to add for hot water and I found there are so many steps and parts not mentioned anywhere. Seeing your approach is immensely helpful to piece of mind and saving time when I start the install. Just wanted to flag something on the exhaust. You might want to route it out the back side of the van. I installed an Espar D2L Airtronic (the same exhaust) and the manual says to make sure to have the outlet port clear the outside edge of the van to avoid gas buildup underneath. Also, if you put it out the side eventually you’ll smell like exhaust when cooking in winter with the t-vents open and the heater on. I also heard that the wheels throw salt, snow and dirt which can foul the exhaust if it’s placed right in front of the wheel. Hope that helps and keep up the good work!
Awesome glad you are enjoying and I do appreciate the input... I don't have any opening windows on the side of the van but I am debating the location due to possible snow build up in winter driving months.. I will leave it as is for now and can be easily modified and discussed at a later moment when traveling... Thanks for watching and commenting.
Thank you , thank you, thank you! I was waiting for your video in order to start installing my espar heater. I have searched and searched but could not find anyone showing the details of the installation of the heater. Looking forward for the rest of your installation and where or what are the parts you used in your install. Once again, thank you!
Wow, super happy this was useful for you. Can’t wait to share the next steps and actually have heat inside ROAMR. You are very welcome, and we will see you on the next video!!
Why not simply use the factory preheater. it is probably a Wabasto and more than adequqte to heat the van seeing it is already heating the largest mass in the vehicle.
12:20 Dude you're the best, you have no idea how long I've been looking for a solution like this. You not only installed it quickly but showed exactly which part was needed and how it works. I wish there were more people like you. Thank u so much dude. Sorry for my poor englisch 😅
There he is ! Nice to see you again Jeff
You seem to be an expert with getting underneath a project !! 😚
Hi Rose!!! LMAO!! Thanks again for watching!!
What other “projects” are you getting underneath? 🤔
Fq I got a few more coming that I can share, stayed tuned to see more!!
Being from the UK and living in my truck for 3 years ! We call them night heaters and should be shielded from stones and bits x
Really detailed information to the community Jeff - we thank you !!
Hey Sam, thanks for watching glad it was useful!!!
Thank you for the leg work on the bulkhead fitting...great install video.
Perfect, happy to hear it brought value. Thank you for watching and commenting.
wow great vid. love your pace and humor. you waste no time while ‘zooming’ in on the important parts. also nice production touches. i’ll be looking for more of you! thx!
Building a cozy custom van for Canadian adventures ! Much respect !! Enjoying the ride and can't wait until the dream becomes a road worthy reality !!
Yes, heater I would say is one of the most important items for a Canadian van build. Thanks for watching, I can’t wait to get out and enjoy the fruits of our labour as well!!
@@DaresDrives hey thanks for putting this together for us - question why the JCI adaptor to the JCI to barred - the barred fitting could be threaded and sealed directly to the JCI Bulkhead no ? Thanks again
You made that part of the build look easy Jeff !
You must be up all night doing research !!
I love that you’ve added your logo on your channel !
Many sleepless nights for sure, especially with those ideas that pop up just as your starting to dose off!!! Thanks for watching Harry.
Great video. Cant wait to tackle this project now
For the floor bushing use plastic electrical bushings. Its just a round piece of plastic open in center. Many differnt sizes. Great video
These were the first videos that got me to your channel. I've since gone back and watched the whole series and am back to the hydronic install. Love the content Jeff!
very clear presentation....subscribed!
Hey Jeff, I may be missing it, did you do a followup finish video of the ESPAR complete install?
Very well done. I really enjoy you showing all the little details. Thanks for sharing with us Jeff.
Thanks Randy, super happy you enjoy the videos.
Thank you for watching and commenting!
Sweet install!!
I think that the mounting screws that came with the machine are tri lobular thread forming screws. These screws form the thread as you drive them in by mushing the Aluminium up. Very common for die cast Aluminium housings like electric motors.
Very informative great for anyone building their own van incredible amount of research you have excellent problem solving skills and product knowledge 🚐
Awesome, super happy we reconnected and you are following along!!! Thank you for watching and commenting..
Great work
Very good video! Thanks for posting.
Awesome, glad you enjoyed... Thank you for watching and commenting!
Dave, Super helpful video! Thank you for putting it together. I just ordered a Rixen sy. for my gasoline Promaster. I am doing a very similar set up except adding radiant floor loop. Thanks to you videos I was able return a US $650 IsoThem hot water tank, and save a ton of space. Thank you! -Eric
That heater looks pretty high tech. Can’t wait to see it fully together.
It is actually pretty straight forward, just looks intimidating!! Thanks for watching Dan.
Thanks for the tip on the fittings! below!
1516BH-12-12 male npt x male jic (2)
G22BFS-075-075 Brass female npsm (4)
0516-12-12 male npt x female jic (2)
As always good stuff! We are going for a Hydronic option as well and your video series will definitely help us out. Cheers Bud!!
Hey Dennis, glad you enjoyed. Thanks for your help on FB and for watching our video. Super happy to hear it brings value to you! 🍻
So glad I found this! I need more Canadian content!!
Perfect! Glad you found the channel as well.. Thank you for watching and commenting!
Nicely done... I am adding one to a boat but mostly the same process.
Awesome good luck with the install... Thanks for watching
Wow a lot research gone into all of this Jeff, looks excellent well impressed. Keep them coming.
Yes, this is why we had to prolong our video timing for a little while. Lots of projects on the mind and adding in the videos is going to give me grey hair!! Haha. Thanks for watching, glad you enjoyed!
Nice install and love the floor passthrough solution. Tip, might want to drill a small drain hole on the bottom of the muffler as the stock hole is on the other side of where the mounting bracket hole is, so...pointing upwards in your install.
OOOO, Good call, never even crossed my mind on that one.. Heading out right now to look at this and correct.... Thank you for watching and commenting...
Jeff just started watching you (I subscribed!) very nicely done. Thanks for all the great tips.
This video is a lifesaver! I've been stressing about this install -- we have the same heater and the same van. Looking forward to part 2, thank you Jeff!
Another great video! Thx for the bulkhead idea!
Awesome glad it was helpful.. Thanks for watching and commenting
Very clean build! I am slowly making it through the entire build series.
I thought on these burners that there was a required orientation with the exhaust down so you do not collect condensation.
Is that burner in one of those approved orientations?
Thanks!
That was a tough one to film! Great work though, I could still follow along. I find that these projects on other channels I just tend to completely lose track of what's going on and end up guessing, this didn't happen here! All of these tubes and wires are a lot to keep track of, I can only imagine the amount of time you spent on this...
HAHAH yes it was a difficult one for sure... Hope it was able to make enough sense to keep your interest level up... Thanks for watching and commenting!
Can’t wait till you fire this unit up, very interesting component!
Thank you for watching and commenting... Cant wait as well to see this heater at work!!
This is really great! Very helpful for our upcoming install! Thanks so much!
Exactly what I am hoping for, super happy it brings value to you!!! Thanks for watching and commenting!
@@DaresDrives do you mind listing out the fittings you used lengths etc? Thank you!!!!
Can you install the glycol container and hot water heat exchanger under the chassis rather than in the van? My van is smaller than yours and I'm trying to figure out where to put these things ...
Really curious about the fittings you put through your floor. Does the heat transfer to the flooring that it is up against?
Question, do you ever wish you cut all the floor penetrations before you installed the floor insulation and flooring?
Thanks much! My furnace is under the van just behind the driver’s seat. I want to run the glycol hose to the other side, over the exhaust. What do I need to do to protect the hose from the exhaust? Is there a minimum distance to maintain. Do I need to shield the hose somehow? If shield, any suggestions?
You probably noticed the factory fit heaters air intake goes into the frame rail, that is supposed to provide silencing and protection from water ingress so you could try doing that if the noise from your second one gets annoying 😀
How’s the exhaust and heater coped close to the wheel any excess muck or damage to either? I am curious because I am still deciding where to mount mine.
Thanks
Very nicely done
Thank you for commenting and watching!! Good luck on your build as well!
@@DaresDrives thank you
How big is the coolant resevoir? And what would you say the minimum size reservoir I could get away with. Also do you have an overflow? Are you running glycol?
Nice. Do you know if the heating unit has to be installed a certain direction, meaning can the plastic cover go up or down?
Just found your video on diesel heater / hot water? So if I am in the desert, need hot water heater not hot air??? 🤷 any ideas? I only have diesel and 12 volt DC????
Have you run the hydronic heating in Van yet? Can you make an estimate of how much fuel heating with hydronic system takes and rough temperature outside when you did test? From Rixens literature is says 0.15 gal/hour. For air heating only system takes only 0.042 gal/hour. Seem like a lot of fuel (4 gallons a day) or does heating cycle so much less fuel is actually used.
Hi Jeff, great introduction...what you do to bring us together❄️☃️ 😉 This is truly a custom build and I’ve enjoyed every moment of it, your teaching and communication skills are on point, plus the visual of application. Thank you for starting your channel and your determination to entertain us ( you know you are😁) we get all the good stuff, thanks again Master Peep you’re a 🌟 See ya when I see ya 👋🏻
Take care of yourself and god bless you ❣️
Hello my #1 peep, thank you so much and super happy you enjoy the videos. Not easy to make them informative and interesting but I feel we are walking the line and will be just fine.
Thanks again, see you on the next video!
Jeff- Thanks for documenting your build, it is a great resource for me so far. I appreciate the way you explain what you are doing , then show us. Can you share the part numbers for the through floor fittings? I searched for "jci" on the web site provided but could not find them. That way I can cross reference them to a site here in Oregon.
I found them in "JIC" but would also appreciate it if you shared the exact parts Jeff. In the states I am looking at ordering through titan or hydraulics direct
Thanks for adding the part numbers to the page, great big thanks!! BTW, when ever we can travel to Canada (and my Van is complete ;)), we have friends that live in a small town very near Calgary and we plan on visiting, it would be great to have a beer with you!!
Any concern about unintended heat gain in the cabin in the summer when heating water?
Thank you for your video, that's the perfect one that I have ever seen. By the way, the reducer(from 4:10 to 4:20),is it 5/16 to 1/8 or 5/16 to 1/4? Where did you get it? Thank you.
Can the heater be installed inside the van and plumbed out through the floor.
Great video. Thanks. PS..JIC, Not JCI.
I just finished installing my D6L heater (looks the same as the one you have), and the manual states the the bolts that come with the heater is self tapping, so no need to tap the holes before screwing in the included bolts :)
This is a true story that i learned after tapping the holes and making the video... No harm done though achieved the same end goal!!! Thanks for watching and commenting.
@@DaresDrives I think we all learn a lot during such build, having very little practical experience I know I do :) As you say, no harm done.
Now if only I could get my water pump to be just half as quiet as yours I would be happy :)
Best educating video in building RV (when I saw your first video I subscribed immediately) . Awesome job, I like your tent attached to van allowing you work at winter , rain. Is there any video of the tent you built around entrance to the van? Thank you my friend.
Wow awesome thank you and welcome to the Dares drives crew, Yes there is a video in our Sunday stories playlist that shows the full set up of the unit... Hope it helps and thank you for watching and commenting!
Very nice video.
Awesome, glad you enjoyed!! Thanks for watching.
Your heating system intrigues me. We just purchases a 2020 Ford Transit and it is being outfitted with 4-wheel drive. Can you give me an approximate cost of this system for hot water and space heating. Thanks
Give Rixens a call as they price can vary depending on your set up.. But I will warn that it's probably the most expensive option out there yet the advantages far out weighed the cost when thinking safety and long term value...
"Thinking with your dipstick Jimmy."
Why not just use the stock diesel heater for the engine to heat the cabin air and water/radiant flooring?
if you hung the pump with ties or wire, so its not ridgid to the van , much less noise. NO HARD CONTACT WITH CHASSIE.
Your videos are addictive. Great job. Question. Doing a frame off restoration on my (hand-me-down) 1975 GMC motor coach. Gasoline engine. ESPAR heating system? Do they make gasoline heaters?
Perfect, thank you... I believe they do, but it wasn't something I research much as it wasn't one of my builds requirements... Thanks for watching and commenting.
Great video. On the expansion tank what temp does the immersion cut out and.
Glad you enjoyed.. Max temp is 190 F. Thank you for watching and commenting.
How much did the total system cost?
Your videos are very entertaining and most of all I think you put a lot of thought into your modification decisions. Have you got the Espar fired up yet? I am curious if you have found extra noise by mounting to the inside body panel. It is quite hollow and sounds drum like when tapping on it. I am considering using self tappers into part of frame structure because of the acoustics. What do you think?
Nate Marine hello and thank you for watching, super happy you enjoyed!
Yes acoustics were a concern during the plan for this step, seeing the factory engine espar heater is mounted to the same location just further up the van and it is not loud at all I assume it should be the same for this unit. I have not tested it yet but will have a video about it once we get to that step. The frame may be a little more solid but is still hollow so not sure it would make much of a difference. But I don’t have real life experience to share unfortunately.
Thanks for watching and commenting!!
Hey Jeff, I'm curious why did you put the intake of the air filter right up against the frame of the van? Wouldn't that block the airflow needed for the furnace to work well?
Hello the inlet does not actually touch the frame, there is a 1.5" gap for air to enter without restriction.. My Instagram has a few better photos of the mounting position. Thanks for watching and commenting.
@@DaresDrives that makes more sense now, thanks for the response! I'm actually mounting mine under my can this weekend. I can see with the sprinter you have a lot of mounting options. On a Promaster it is going to be interesting haha. Keep going on your build man, it looks gorgeous so far. Also, your outro sounds are freaking awesome!! "Perfect!" 😎
WOWWW
thank u jesus for dropping this informative channel in my recommendation ,this is excatly what i was looking for subscribed :)
Excellent videos Jeff! I really wanted one of these units in my van build but I was a bit intimidated by the idea of DIY. You make this easy to understand and I am now inspired to move forward with this! Might I ask how you placed your order with Rixens Enterprises? Did you have to order all of the components separately or did they sell it as a kit? Again, thanks for sharing your experience!!!!
Glad you are enjoying and they are bringing value. I just called them and ordered up. Yes it is sold as a kit just tell them what you want heated and they will take care of you.
Does anybody do a video on the wiring as I bought this heater through Amazon and no instruction as well as a lot of parts apparently. Most important was no instruction manual. Using it for in floor heating and hot water/recirculating shower in cargo trailer conversion. I also have forced air diesel heater now up and running.
I did an earlier video about the pre-wiring of the unit as well just finished our completed install which shows wiring on new upgraded system.. Hope it helps. thanks for watching and commenting
The bolts are m5 or m6. Basically, metric so grab those 2 metric taps. The instructions say the bolts will tap it but I don't trust that.
Yup I just decided to tap my own holes. Only took 5 minutes to do!
.33. I do not recommend pointing a propane shop heater in the direction of any vehicles gas tank.
Thank you SO MUCH for creating a hydronic how to video, I recently bought one for my own Sprinter build to add for hot water and I found there are so many steps and parts not mentioned anywhere. Seeing your approach is immensely helpful to piece of mind and saving time when I start the install.
Just wanted to flag something on the exhaust. You might want to route it out the back side of the van. I installed an Espar D2L Airtronic (the same exhaust) and the manual says to make sure to have the outlet port clear the outside edge of the van to avoid gas buildup underneath. Also, if you put it out the side eventually you’ll smell like exhaust when cooking in winter with the t-vents open and the heater on. I also heard that the wheels throw salt, snow and dirt which can foul the exhaust if it’s placed right in front of the wheel.
Hope that helps and keep up the good work!
Awesome glad you are enjoying and I do appreciate the input... I don't have any opening windows on the side of the van but I am debating the location due to possible snow build up in winter driving months.. I will leave it as is for now and can be easily modified and discussed at a later moment when traveling... Thanks for watching and commenting.
Thank you , thank you, thank you! I was waiting for your video in order to start installing my espar heater. I have searched and searched but could not find anyone showing the details of the installation of the heater. Looking forward for the rest of your installation and where or what are the parts you used in your install. Once again, thank you!
Wow, super happy this was useful for you. Can’t wait to share the next steps and actually have heat inside ROAMR.
You are very welcome, and we will see you on the next video!!
it must be fun laying on rocks
LMAO, yes there is nothing better than laying on frozen gravel!! Thanks for watching and commenting!
1:45 closed the video.
@@Tony-xc5sk unfortunate, you missed the best parts! Thanks for stopping in!
Wrong pressure fuel line son.........
Why not dump the factor pre-heater because the espar IS a preheater!
Why not simply use the factory preheater. it is probably a Wabasto and more than adequqte to heat the van seeing it is already heating the largest mass in the vehicle.