thank you for producing such an informative series of videos...I'm new to detecting and you have given me some new optimism, I'll put your principles into play.
Thanks for watching, let’s hope the gold starts to flow. Move the coil very slow and keep close to the ground. A lot of gold we find starts off being a veg faint signal. Tune your ears into the normal chatter and try to pick out anything that’s different. Often it’s just a slight increase in or decrease in tone or a fluctuation of the signal.
Shalom Dear Brian & Lisa. After 6 weeks in the Clermont areas, with only .4 grams of finds. This Great Informed Video, will assist us greatly in the search for the elusive Shiny Stuff. Ahava Emek.
There are no settings that work on all ground. What I do is adjust the sensitivity in difficult mode to get threshold that is consistent. I rarely touch the threshold setting, usually at factory preset. I use the same settings when I switch to normal mode, but need to raise the coil slightly and move slowly. If you don’t do this it will be way too noisy. I never use ground smoothing, in my opinion it masks those faint sounds you are trying to pick up.
thank you for producing such an informative series of videos...I'm new to detecting and you have given me some new optimism, I'll put your principles into play.
Thanks for watching, let’s hope the gold starts to flow. Move the coil very slow and keep close to the ground. A lot of gold we find starts off being a veg faint signal. Tune your ears into the normal chatter and try to pick out anything that’s different. Often it’s just a slight increase in or decrease in tone or a fluctuation of the signal.
Very informative, thanks, stay safe,👍👍👍
He sure likes barking orders... Great video!
Shalom Dear Brian & Lisa.
After 6 weeks in the Clermont areas, with only .4 grams of finds.
This Great Informed Video, will assist us greatly in the search for the elusive Shiny Stuff.
Ahava
Emek.
Part 11 watched every one of them thank you very much have the word so much
Thanks Paul, this was filmed 12 months ago and I forgot to post it ⛏️⛏️
Great video and advice with normal mode. Would you mind sharing settings for normal mode. TIA
There are no settings that work on all ground. What I do is adjust the sensitivity in difficult mode to get threshold that is consistent. I rarely touch the threshold setting, usually at factory preset.
I use the same settings when I switch to normal mode, but need to raise the coil slightly and move slowly. If you don’t do this it will be way too noisy. I never use ground smoothing, in my opinion it masks those faint sounds you are trying to pick up.
Great vid mate.
good luck happy days
great vid mate and info as well keep it up mate
Thanks 👍
You’ll be surprised how deep the 6 goes. You’re not far from the test patch across from the Harness track. Give it a go against the zed
Where’s the test patch, is it marked?
Is your detector modified?
No
1000 bits later you can buy a coffee
Your 7 should of picked up the peice your wife got on the patch you dug up. I run a 5 with evo coils and it would of got that very easy
It would have picked it up easily, I didn’t detect on that area, I gave Eliza the first shot at it… my mistake :)
Btw, I love the 5000, still have one and I reckon I would get most if not all the gold my 7000 picks up.