Fun fact the key cylinders are bolted down with breakaway bolts designed to break the head off when they’re tightened so you can’t “steal” them as easy but the chisel method breaks them loose and can spin em out and use a regular 12mm in its place.
👏 for leaving things together for the next guy. I hate that people go and break stuff and when you show up and find the part you need, it's broken. Smh for that nonsense.
California is wild... In Washington we have hundreds if not thousands of civics 87-2019 in the junkyards. Thousands of TSX and RSX. Like I can go to the junkyard pick up 4 p28 ecus right now and 6 k series with 60k miles or less. Nutty yo.
for the hatch key cyl. you can take it apart and swap out the tumblers. If you do come back there I could use both door molding. let me know willing to pay for them Thanks.
You can take the lock out of the hatch and take the lock and key to lock smith and they can repin the lock cylinder to match the original key so it’ll all match
If he goes mudding, he needs to put a snorkel on and run that intake into the snorkel with a pre filter, that would be his best bet so he doesn’t suck up any water
I've been working on my friends RX8 for a month now we replace exhaust after they stole the catalytic converter put on 0/2 sensor upstream one change the spark plugs coil packs wires new filter new oil cleaned all the sensors new mass air flow sensor car still starts runs rough backfiring into the intake
Ya know it's pretty dope that you take these cars apart and leave good parts for the next guy. It's such a dick move to just RIP stuff off and break things 💪
I HATE when you FINALLY come across the vehicle you been looking for in the junkyard only to walk up to it and see that someone has be fucking with the parts you need. We got some real assholes at the yards I go to, they will just randomly walk past vehicles and take their big ass hammers and dent every single body panel, break all the plastic stuff on the vehicle etc, etc. just for fun. Pisses me the fuck off.
I’m headed to pick n pull my self soon with friends. I need a fender and odds and ends and my friends needs parts so we try to gather up and knock it out. I just hope I have time to search I own three vehicles so any goodies are good to have as spree
Why did static take the p06 ecu? I had a eg before and i believe its only good for the d15b7, the p28 is the better one for the mini me or z6. I thought its not worth much
@youngstatic for the hellement build there's feed on honda element owners club how to add a sixth gear to the transmission. Not sure if you would need that. I think Sparman is one of the members who first did this.
I have a 1994 honda civic ex 1.6 and my windows,sunroof,side mirrors,climate control does not work. I've checked fuses and they seem to be good. What could be the cause of this problem?
Yup. Went to honda and bought mine about a year ago for 140? It is a vintage part so you can't return it if you get the wrong color. Also the original lips are still available
Tengo un honda 90 I put the engine 93 by the harness I’m stuck in there man I need help the original arnés My friend and took it away and I only have the owners and 93 but The plogs the don’t fit in the 90 How you help me I live in San Diego where are you live
Dam they always have to fuck up something so no one else gets it..its what pissed me off when i would try to find fenders for my old wagon and id see the pics clean with trunk glass and all and once there its all smashed in
@@edgarsoltero1989 Yeah but he also has literal parts for sale i been trying to hit him up for as well and still no response. And legit I live like 40 minutes from him, i went to the yard myself to try and get it but it was gone by then. So obviously I'm not a dead beat like the rest of yall can be
Those armrest are nothing special and not worth big money if anyone says they are they’re not those are stock eg sedan consoles all ex and lx models had them I have a ton lol. The valuable ones are the ones with plush cushions on them as they were optional add ons
200 is 1 ECU if you are lucky on the street... Let alone he's giving them away to go get tuned. 2 ecus 2 door panels and 2 door handles is about 200$. Or 500+$ street price.
Fun fact the key cylinders are bolted down with breakaway bolts designed to break the head off when they’re tightened so you can’t “steal” them as easy but the chisel method breaks them loose and can spin em out and use a regular 12mm in its place.
I’ve only ever used a flat head too lol never a chisel
👏 for leaving things together for the next guy. I hate that people go and break stuff and when you show up and find the part you need, it's broken. Smh for that nonsense.
Didn’t know that parts are getting hard to find!! Glad I kept mines! All OEM
I really like the junkyard vids but all others as well learning tricks and things from ya. Thanks for all the videos.
I love finding gems at the yard. EJ are getting more rare these days. I'm in the Bay Area too. Would love to meet you bro.
Looks mint man you always build cars clean no matter what. Those welds are better than anything I can do.
California is wild... In Washington we have hundreds if not thousands of civics 87-2019 in the junkyards. Thousands of TSX and RSX. Like I can go to the junkyard pick up 4 p28 ecus right now and 6 k series with 60k miles or less. Nutty yo.
Where at in Washington
Word of the day SUPER CLEAN
for the hatch key cyl. you can take it apart and swap out the tumblers. If you do come back there I could use both door molding. let me know willing to pay for them Thanks.
You can take the lock out of the hatch and take the lock and key to lock smith and they can repin the lock cylinder to match the original key so it’ll all match
Loved the video dana, good finds for 🫐 and slick fab work on the element 🤘🏻
Watching these videos make me wanna start a turbo project....just gotta find a good base car
If he goes mudding, he needs to put a snorkel on and run that intake into the snorkel with a pre filter, that would be his best bet so he doesn’t suck up any water
I've been working on my friends RX8 for a month now we replace exhaust after they stole the catalytic converter put on 0/2 sensor upstream one change the spark plugs coil packs wires new filter new oil cleaned all the sensors new mass air flow sensor car still starts runs rough backfiring into the intake
Is that a SuBaWoo?🤣😂😅 funny joke
Ya know it's pretty dope that you take these cars apart and leave good parts for the next guy. It's such a dick move to just RIP stuff off and break things 💪
Pick n pull sell engine as a complete no more long block or short blocks...I try to tell my costumers this all the time lol
I HATE when you FINALLY come across the vehicle you been looking for in the junkyard only to walk up to it and see that someone has be fucking with the parts you need. We got some real assholes at the yards I go to, they will just randomly walk past vehicles and take their big ass hammers and dent every single body panel, break all the plastic stuff on the vehicle etc, etc. just for fun. Pisses me the fuck off.
That’s was a clean 92-95 Honda civic ……. And they are ej1 👌🏼😮😮😮 bro i need that srs and the shoe horn 😢
I’m headed to pick n pull my self soon with friends. I need a fender and odds and ends and my friends needs parts so we try to gather up and knock it out. I just hope I have time to search I own three vehicles so any goodies are good to have as spree
I’m learning alot….thank you so much
Filter fits niiiiceeee. I goin to say they got the tapered option , in 4"
Why did static take the p06 ecu? I had a eg before and i believe its only good for the d15b7, the p28 is the better one for the mini me or z6. I thought its not worth much
@youngstatic for the hellement build there's feed on honda element owners club how to add a sixth gear to the transmission. Not sure if you would need that. I think Sparman is one of the members who first did this.
Hi! Is it a good or bad decision to swap a b18c into a 92 honda prelude si ? Thanks for your response!!
Where are these pick and pulls located because I’m in upstate New York and would love to see if theres some down south like New York City area???
I have a 1994 honda civic ex 1.6 and my windows,sunroof,side mirrors,climate control does not work. I've checked fuses and they seem to be good. What could be the cause of this problem?
Im your subscriber from philippines hope i can see your build im on vacation in milpitas
You can still buy the armrest brand new.
Yup. Went to honda and bought mine about a year ago for 140? It is a vintage part so you can't return it if you get the wrong color. Also the original lips are still available
Dang I need those grey door panels
That armrest looks blue man! Haha
It’s had to be him or me going color blind 😅😭most definitely saw blue
I saw that in san jose pick n pull bro
From guyana bro like your work
Hey man I wanna know if you can find two fenders the left in the right for a 97 hatchback civic
Tengo un honda 90 I put the engine 93 by the harness I’m stuck in there man I need help the original arnés My friend and took it away and I only have the owners and 93 but The plogs the don’t fit in the 90 How you help me I live in San Diego where are you live
Arm rests for egs here are around 150 euros + super rare to find
Love the videos man!
Yeaaa junk yard video!!!
Great work bro
What kind of welder are you using?
Dam they always have to fuck up something so no one else gets it..its what pissed me off when i would try to find fenders for my old wagon and id see the pics clean with trunk glass and all and once there its all smashed in
That seems like alot!? ECU in canada r only 50$ ea
Yo static I got a p1163 and p1164 code on my k24 idk what it could be I need some guidance please and thank you lol
i wouldve killed for those door panels :(. i need some so bad
Tried contacting you on all your social medias saying to buy it and I'll buy it from you
Drove all the way to San Jose hoping it was there and gone
He's said multiple times that he won't do that anymore due to people flaking on him, and he ends up getting burned with parts he doesn't want or needs
@@edgarsoltero1989 Yeah but he also has literal parts for sale i been trying to hit him up for as well and still no response. And legit I live like 40 minutes from him, i went to the yard myself to try and get it but it was gone by then. So obviously I'm not a dead beat like the rest of yall can be
Eyy bro do you have extra ecu po6 or po8 ineed ecu for my honda civic
I am working on my ek rs 1999 out of japan
Keep it pushing
Why not just swap to an adjustable steering column?
Can you snag the roof trim?
Ha i was just there a few days ago
Youngstatic do u have engine for 2000 honda civic ex 1.6. For sale
First ❤ this man is a legend !! Putting in that work for us!
Yo I'm from modesto grab that arm rest and i will come buy it off ya if its still there i need it
Boss is that in san jose?
hm d armrest in junk yard?
tnx
Did it pull a vacuum
How do we get a hold of you if you want parts?? I try Instagram u
What state are u in ?
Those armrest are nothing special and not worth big money if anyone says they are they’re not those are stock eg sedan consoles all ex and lx models had them I have a ton lol. The valuable ones are the ones with plush cushions on them as they were optional add ons
Let's goo!!!
That cb7 😢
You switching the auto to a manual
They deliberately dented the fenders SMH
Why do people dooo this ?!! Kick in fenders and shit
🔧💪🏽
200 sounds like a lot of money .
That’s like 2$ in California 🤣🤣
200 is 1 ECU if you are lucky on the street... Let alone he's giving them away to go get tuned. 2 ecus 2 door panels and 2 door handles is about 200$. Or 500+$ street price.
@@AndyKPOV no i get it but , the pricing seem like too much
🤙🏽🤙🏽🤙🏽
KHMERRR
😜👍🇦🇺
✌🏻🇳🇱
Tag
Cut away from yourself not towards yourself 😮
EK
200 DOLLARS. FUCK
First Comment! Been waiting for u dana!
Static bro trying to find this months 37740-PT7-A000 fan timer 92 accord
Eyy bro do you have extra ecu po6 or po8 ineed ecu for my honda