Tip for those struggling with using this macro. Remember, before pressing the macro twice, WAIT, for your GCD to be reset. I was doing the noob mistake of pressing seal of Matyr - than immediately pressing the macro. It will not work because your judgement will go off, but you will not cast Command as your GCD from Matyr is still resolving. This also goes for any spell. You will notice in his video that he does a little wait shimmy with his character. Thats him waiting for the GCD to reset. If you wait. The Macro will work 100% of the time. Cheers.
Yo, what's the point doing this castsequence stuff specialy if judgement takes over the seal immediatly and makes it difficult? I can sucess 100% w/o, but then u can just do similar macro as yours, like : #showtooltip Judgement /cast Seal of Command /cast Judgement /startattack What would be different from yours, im curious do I miss the point mybe? lmk
its different , if you try your macro you will notice that the auto attack registeres after the judgement , hence u dont do the seal twist , ive tested all possible ways to make a macro where u press it only once - cant be done afaik , maybe something will come up later idk , so far my macro is the best as it gets in term of ease of usage . the point of the macro is to do both things with 1 button , your macro just does a double judge without the twist
Sup man awesome Vid, what runes are you rockin? I guessed all of them except your helm rune. Also what is it that heals you got that looks like Rejuv? Thanks again!
Hey, thanks for the guide. The macro seems to work for the most part, but I'm not sure how you make it more consistent, sometimes the weapon swing seems to be delayed or something so nothing procs. Also how do you fix the issue if you get stuck on needing to place a judgement next with no targets nearby?
sometimes things just dont proc , also im using stop attack macro aswell , makes it more consistent i guess , just stop attacking until u are ready to blast em . about the stuck on judgement , usually there is a /castsequence [reset=(some number] blabla ... so make it reset every "x" seconds but ...... :D i just /reload lol maybe shouldve fixed that , but im used to using the macro so i rarely get stucked
It's an overkill :D tbh i havent even tried reckoning. You have to get critted first before u pop which i dont really want :D ( u get critted by most classes means u are prob dying already ) + idk if it works as intended in sod . :D will try it tho
@@ThezarWoW its works very nice.Rec trigering also from dot criths wich is veri nice.Also we have new chest rune that upg reck to prock from mele and range hits by 10%.So u just melt ppl
Hi, Interesting to use Aura Mastery and Sanctity aura so you baasically have 20% bonus but why did you put points in SoR if you do not use it? those points could go somewhere else. Also, no eye for an eye. Right now tbh I am also using full ret + 35 sec HoJ CD because I love to spam HoJ in big fights
Seal of Martyrdom benefits from all talents that benefit SoR , that means +15% on SoM's seal and judge damage , 35 sec HoJ sounds good but it requires u to go full prot tree , I have 5% hit from gear , which means i would waste 20 talent points just to get 15 sec off HoJ. Putting these 20 points in Holy gives you 10% str (which is also bonus sp) , 15% SoM dmg , extra healing and reduces pushback , and either lay cd reduce ot fear/disorient chance to resi , its just too much to miss out on man , fck the 15 sec cd on HoJ IMO :D
eye for an eye u can get if u dont take fear/disorient chance to resist talent , but eye for an eye I use only in shockadin set when in reality i could fight one target for a bit longer so it scales, as deep ret , i dont prefer it , sod too bursty for eye for an eye
@@ThezarWoW oh, correct. I forgot the last part from SoM... well, I go change some talents Yes, you are right about HoJ and I did it just to test it in group combat but in generl I put all these points in Holy tree for more heal
for some reason macro doesnt work well when i do manually click command and judgement it works better what im missing? pre cast martydom get close to mob and click macro but doesnt double judge
you have to click it twice as said in the video , it works with no failure . maybe something misspelled in the macro ? ive been using it for weeks now .
its a cast sequence macro and requires double click cause judge registers before command no matter how u make the macro ( also auto goes off after judge ) thats why the only way is with castsequence and double clicking it real fast. first click applies command , second click - judges
Thanks , mate ! I believe its this one : wago.io/IAo90vW6O But I have deleted most of the weakaura and just left the seal indicator and the swing timer :) ( I have only Seal Indicator 2 2, Swing Bar 3 2, SwingTimerAPI 3 2 )
Anyone else having issues with the macro? it works about 50% of the time for me. I cast martyrdom wait for gcd then pressmacro twice as quickly as possible and I sometimes get double judgement but not twisting. Sometimes I press it and I get 1 seal 1 judge and end up wit seal of command active.
you have to get used to it , 1st you have only 0.4 sec window to press it twice , its a very short window , second if u are not getting the autos off , its either u are too far away from the target to auto or you didnt wait for ur auto attack to reset , i advice having stopattack macro and pressing it before using the macro , wait for ur auto attack , if u press the macro just after u auto-ed nothing will happen :) hope this fixes it
Like and Subscribe ! :) Will post anything I find OP for paladins in future.
Tip for those struggling with using this macro. Remember, before pressing the macro twice, WAIT, for your GCD to be reset. I was doing the noob mistake of pressing seal of Matyr - than immediately pressing the macro. It will not work because your judgement will go off, but you will not cast Command as your GCD from Matyr is still resolving. This also goes for any spell. You will notice in his video that he does a little wait shimmy with his character. Thats him waiting for the GCD to reset. If you wait. The Macro will work 100% of the time. Cheers.
Thanks for that . Maybe I shouldve included this but didn't...
Yo, what's the point doing this castsequence stuff specialy if judgement takes over the seal immediatly and makes it difficult?
I can sucess 100% w/o, but then u can just do similar macro as yours, like :
#showtooltip Judgement
/cast Seal of Command
/cast Judgement
/startattack
What would be different from yours, im curious do I miss the point mybe? lmk
its different , if you try your macro you will notice that the auto attack registeres after the judgement , hence u dont do the seal twist , ive tested all possible ways to make a macro where u press it only once - cant be done afaik , maybe something will come up later idk , so far my macro is the best as it gets in term of ease of usage . the point of the macro is to do both things with 1 button , your macro just does a double judge without the twist
@@ThezarWoW hey ty for answer, got it, Ill try your macro again then and l will let you know ❤️
Sup man awesome Vid, what runes are you rockin?
I guessed all of them except your helm rune. Also what is it that heals you got that looks like Rejuv? Thanks again!
I run Fanatism in the head slot. It's a must since it gives u 18% crit on judge + the HoT healing when u crit. Thanks
@@ThezarWoW Awesome, thanks so much man! I was wondering what I was missing from my dmg!
Nice i hadnt tought of judgment crit with fanatism. Thanks.
Hey, thanks for the guide. The macro seems to work for the most part, but I'm not sure how you make it more consistent, sometimes the weapon swing seems to be delayed or something so nothing procs.
Also how do you fix the issue if you get stuck on needing to place a judgement next with no targets nearby?
sometimes things just dont proc , also im using stop attack macro aswell , makes it more consistent i guess , just stop attacking until u are ready to blast em .
about the stuck on judgement , usually there is a /castsequence [reset=(some number] blabla ... so make it reset every "x" seconds but ...... :D i just /reload lol maybe shouldve fixed that , but im used to using the macro so i rarely get stucked
Do you press the macro to match the twist weakaura bar? It feels like it's not a video?
ofc , you have to wait for your swing timer to reset to seal twist.cant seal twisti without getting an auto off :D :)
Yo man very nice guide 👌
thank you !
O-OneShot?
seal twist bonus with reckoning will be very nice :D
It's an overkill :D tbh i havent even tried reckoning. You have to get critted first before u pop which i dont really want :D ( u get critted by most classes means u are prob dying already ) + idk if it works as intended in sod . :D will try it tho
@@ThezarWoW its works very nice.Rec trigering also from dot criths wich is veri nice.Also we have new chest rune that upg reck to prock from mele and range hits by 10%.So u just melt ppl
Hi,
Interesting to use Aura Mastery and Sanctity aura so you baasically have 20% bonus but why did you put points in SoR if you do not use it? those points could go somewhere else. Also, no eye for an eye.
Right now tbh I am also using full ret + 35 sec HoJ CD because I love to spam HoJ in big fights
Seal of Martyrdom benefits from all talents that benefit SoR , that means +15% on SoM's seal and judge damage , 35 sec HoJ sounds good but it requires u to go full prot tree , I have 5% hit from gear , which means i would waste 20 talent points just to get 15 sec off HoJ.
Putting these 20 points in Holy gives you 10% str (which is also bonus sp) , 15% SoM dmg , extra healing and reduces pushback , and either lay cd reduce ot fear/disorient chance to resi , its just too much to miss out on man , fck the 15 sec cd on HoJ IMO :D
eye for an eye u can get if u dont take fear/disorient chance to resist talent , but eye for an eye I use only in shockadin set when in reality i could fight one target for a bit longer so it scales, as deep ret , i dont prefer it , sod too bursty for eye for an eye
@@ThezarWoW oh, correct. I forgot the last part from SoM... well, I go change some talents
Yes, you are right about HoJ and I did it just to test it in group combat but in generl I put all these points in Holy tree for more heal
for some reason macro doesnt work well when i do manually click command and judgement it works better what im missing? pre cast martydom get close to mob and click macro but doesnt double judge
you have to click it twice as said in the video , it works with no failure . maybe something misspelled in the macro ? ive been using it for weeks now .
its a cast sequence macro and requires double click cause judge registers before command no matter how u make the macro ( also auto goes off after judge ) thats why the only way is with castsequence and double clicking it real fast. first click applies command , second click - judges
do i need a 6 pieces of set 1.0 to this?
nope
hey bud, very nice macro!
can you share your seal/autoattack weakaura bar? :)
Thanks , mate ! I believe its this one : wago.io/IAo90vW6O
But I have deleted most of the weakaura and just left the seal indicator and the swing timer :) ( I have only Seal Indicator 2 2, Swing Bar 3 2, SwingTimerAPI 3 2 )
dose this still workk
cant get the double judment to proc only seal twist?
ofc , it will always work
check if u didnt misswrote the macro or something , u have 0.4sec to double press the macro for the judge to go off
@@ThezarWoW got it to work a couple time but man its tough to make it proc consistently
Anyone else having issues with the macro? it works about 50% of the time for me. I cast martyrdom wait for gcd then pressmacro twice as quickly as possible and I sometimes get double judgement but not twisting. Sometimes I press it and I get 1 seal 1 judge and end up wit seal of command active.
you have to get used to it , 1st you have only 0.4 sec window to press it twice , its a very short window , second if u are not getting the autos off , its either u are too far away from the target to auto or you didnt wait for ur auto attack to reset , i advice having stopattack macro and pressing it before using the macro , wait for ur auto attack , if u press the macro just after u auto-ed nothing will happen :) hope this fixes it
if u notice in my videos before i use the macro i always wait for the gcd + the auto attack to reset
Just have x6 t1 and you have window 6 sec
its not preferable to run 6/6
@@ThezarWoW wait movie with x6 t1 😇
Anyone can write me this macro in german xD ? I was to stupid for that hahaha
not me :D