When it stops raining I'll make a video of the washing machine motor again on test bench as a motor and a gen .or my be 2 in 1.but having it working as a motor with missing phases that are used for the gen side all in one .the motor seems to not be so grunty in the starting point.thay are good to muck around with tho .I'll make a e bike battery charger with one 😁👍🌟72 volts
For faster RPM you have to have less poles. For a 36 pole Stator You will need to rewire the motor from 12 pole to 6,4, or 2 pole (Ex: In series wire the stators in the same direction Clockwise or Counter clockwise as long as it's the same. Stators wired in series below. 2-pole A phase [1-2-3-4-5-6]----[19-20-21-22-23-24] B phase [7-8-9-10-11-12]----[25-26-27-28-29-30] C phase [13-14-15-16-17-18]----[31-32-33-34-35-36] 4 pole A phase [1-2-3]----[10-11-12]----[19-20-21]----[28-29-30] B phase [4-5-6]----[13-14-15]----[22-23-24]----[31-32-33] C phase [7-8-9]----[16-17-18]----[25-26-27]----[34-35-36] 6 pole A phase [1-2]----[7-8]----[13-14]----[19-20]----[25-26]----[31-32] B phase [3-4]----[9-10]----[15-16]----[21-22]----[27-28]----[33-34] C phase [5-6]----[11-12]----[17-18]----[23-24]----[29-30]----[35-36] 12 pole A phase [1-4-7-10-13-16-19-22-25-28-31-34] B phase [2-5-8-11-14-17-20-23-26-29-32-35] C phase [3-6-9-12-15-18-21-24-27-30-33-36] WYE Configuration Power line goes into each one of the Start phase from your controller ABC The End phases ABC are join together as Common. Phase A-Start-line Phase A end Phase B-Start -line Phase B end Phase C-Start-line Phase C end Delta Configuration Blue Power Line A------>Phase A-Start-line----->Phase B end Green Power Line B---->Phase B-Start -line---->Phase C end Yellow PowerLine C---->Phase C-Start-line----->Phase A end
Wow 😳 cool work thank you heeps .I just hadn't worked that wiring diagram out yet but now I will study it more now thanks to you cool stuff 😃👍🎉👌🌟🌟 from cruzermans inventions 😁👍
To get higher speed from a stock smart drive motor all you need to do is reduce the amount of poles in each phase say just use the first one or two poles in each phase by cutting the jumper wire to the next one, after the 3 jumper wires have been severed tie the ends just cut together. Then solder the connection . Next take the severed ends from the remaining pickups and solder on 3 new leads insolate connections accordingly. You now have a duel speed motor both 3 phase or a motor and an alternator in one... 😎
Tristan I have a question did you wire this motor and decrease the pole count to increase RPM. Also What voltage are you running to this motor Because there are controllers that are 340 volt DC and 160 DC you can use that will it rotate like you never seen before.
Allsome thank you heeps I took that motor out of the bike and put in a 90amp car alternator but I'm going to be putting the washing machine motor in another bike soon.
Olá sou brasileiro, e estou fazendo um desses aqui moro na Amazônia, na cidade de Manaus. Gostaria de fazer o meu, para carregar baterias, ligando em delta. Vou acompanhar você fazer pois preciso muito. Quando comprei liguei, em estrela original e queimou minha geladeira. Nesse canal eu acompanho más não entendi muito.ruclips.net/video/8SWq5Pskpug/видео.html
My new wiring covers 12 poles and then the 3 wires get soldered at the end .there is 3 lots of 12 in the 36 pole motor witch means it's a 3 X 48 volt motor 🌟😁🎉👌
@@tristanmcnabb2741 of course we understand. Quick question you said you rewired one of the motor stators with larger wire. As a result you had increased RPM. Did you try to apply a larger DC controller to the same stator with smaller wire for this like a 48 to 80 volt controller?
Also have you tried to wire the stator for single phase as your generator. And depending on your turn ratio. This would give you a higher voltage, but you of course would need another motor to run this to spin the magneto around the stator coil.
I did think about using the 3000 watt controller at 72 v with the factory wire stator and see if that works well but it's still will only be under 50 kph in speed and every witch way I look at this motor I think the alternator will be faster 😁👍🌟 all some from cruzermans inventions 😁🎉
Cool guys part 2 is coming up soon😁👌
Th to rewire all that ..but hey dam worth every blister by the looks of it bloody great man .is is really clever but omg you have a lot of patence
Excellent information man, it's put me onto something that's been a bit of blockage in a few of my projects. Thanks
When it stops raining I'll make a video of the washing machine motor again on test bench as a motor and a gen .or my be 2 in 1.but having it working as a motor with missing phases that are used for the gen side all in one .the motor seems to not be so grunty in the starting point.thay are good to muck around with tho .I'll make a e bike battery charger with one 😁👍🌟72 volts
For faster RPM you have to have less poles.
For a 36 pole Stator You will need to rewire the motor from 12 pole to 6,4, or 2 pole (Ex: In series wire the stators in the same direction Clockwise or Counter clockwise as long as it's the same. Stators wired in series below.
2-pole A phase [1-2-3-4-5-6]----[19-20-21-22-23-24] B phase [7-8-9-10-11-12]----[25-26-27-28-29-30] C phase [13-14-15-16-17-18]----[31-32-33-34-35-36]
4 pole A phase [1-2-3]----[10-11-12]----[19-20-21]----[28-29-30] B phase [4-5-6]----[13-14-15]----[22-23-24]----[31-32-33] C phase [7-8-9]----[16-17-18]----[25-26-27]----[34-35-36]
6 pole A phase [1-2]----[7-8]----[13-14]----[19-20]----[25-26]----[31-32] B phase [3-4]----[9-10]----[15-16]----[21-22]----[27-28]----[33-34] C phase [5-6]----[11-12]----[17-18]----[23-24]----[29-30]----[35-36]
12 pole A phase [1-4-7-10-13-16-19-22-25-28-31-34] B phase [2-5-8-11-14-17-20-23-26-29-32-35] C phase [3-6-9-12-15-18-21-24-27-30-33-36]
WYE Configuration Power line goes into each one of the Start phase from your controller ABC The End phases ABC are join together as Common.
Phase A-Start-line Phase A end
Phase B-Start -line Phase B end
Phase C-Start-line Phase C end
Delta Configuration
Blue Power Line A------>Phase A-Start-line----->Phase B end
Green Power Line B---->Phase B-Start -line---->Phase C end
Yellow PowerLine C---->Phase C-Start-line----->Phase A end
Wow 😳 cool work thank you heeps .I just hadn't worked that wiring diagram out yet but now I will study it more now thanks to you cool stuff 😃👍🎉👌🌟🌟 from cruzermans inventions 😁👍
See you may version;Wind generator with LG ddm 0001
To get higher speed from a stock smart drive motor all you need to do is reduce the amount of poles in each phase say just use the first one or two poles in each phase by cutting the jumper wire to the next one, after the 3 jumper wires have been severed tie the ends just cut together. Then solder the connection . Next take the severed ends from the remaining pickups and solder on 3 new leads insolate connections accordingly. You now have a duel speed motor both 3 phase or a motor and an alternator in one... 😎
Allsome work yip I got that and I'll have to try it out that's so big thank you from cruzermans inventions 😁👍🌟
Interesting. 2 in 1. That's sounds too good to be true. Is there a video on it? I'd love to learn how to make that
How did you get the knowhow to make the motor rewind happen ??? How about getting all those motors and magnet wire you are using Sir ?? thanks
Great job
Biggest thanks 😊👍🎉 from cruzermans inventions 😁👌🌟
Tristan I have a question did you wire this motor and decrease the pole count to increase RPM. Also What voltage are you running to this motor Because there are controllers that are 340 volt DC and 160 DC you can use that will it rotate like you never seen before.
Allsome thank you heeps I took that motor out of the bike and put in a 90amp car alternator but I'm going to be putting the washing machine motor in another bike soon.
My controler I used was to powerful after I rewired it .100 volts at 3000 watts was to much
Olá sou brasileiro, e estou fazendo um desses aqui moro na Amazônia, na cidade de Manaus. Gostaria de fazer o meu, para carregar baterias, ligando em delta. Vou acompanhar você fazer pois preciso muito. Quando comprei liguei, em estrela original e queimou minha geladeira. Nesse canal eu acompanho más não entendi muito.ruclips.net/video/8SWq5Pskpug/видео.html
My new wiring covers 12 poles and then the 3 wires get soldered at the end .there is 3 lots of 12 in the 36 pole motor witch means it's a 3 X 48 volt motor 🌟😁🎉👌
Sir it's A-B-C Phase not + - Earth
That just say a b c to make it ezeyr to understand allsome work
@@tristanmcnabb2741 of course we understand. Quick question you said you rewired one of the motor stators with larger wire. As a result you had increased RPM. Did you try to apply a larger DC controller to the same stator with smaller wire for this like a 48 to 80 volt controller?
Wired for Delta or Star since star give you more torque and Delta would give you more RPM just incase for those who don’t know
Also have you tried to wire the stator for single phase as your generator. And depending on your turn ratio. This would give you a higher voltage, but you of course would need another motor to run this to spin the magneto around the stator coil.
I did think about using the 3000 watt controller at 72 v with the factory wire stator and see if that works well but it's still will only be under 50 kph in speed and every witch way I look at this motor I think the alternator will be faster 😁👍🌟 all some from cruzermans inventions 😁🎉