My new big game cartridge. 8,5x55 blaser Is a short 404 jeffery case with 65grain powder capacity ..swarovski z8i 1-8 scope. Stalon xe108 silencer Factory Norma oryx 230gr
Achte auf deinen rechten Ellenbogen, der gehört auf den Tisch und nicht auf die Kante. Deine Schulter ziehst du ungleichmäßig hoch, daher die Höhenstreuung und die linke Hand gehört an den Hinters haft. Etwas mehr Vorlage mit dem gesamten Oberkörper und du schaffst dann auch gute 3er Gruppen ohne einen Ausreißer...
@@blaserlongrange7616 Watch your right elbow, it belongs on the table and not on the edge. Your shoulder is pulled up unevenly, hence the height spread and the left hand belongs to the back. A little more pattern with the whole upper body and you will be able to make good groups of 3 without a breakaway...
Good shooting however the same phenomenon - one flyer. The shooting rack/aid used hops rater much on each shot i.e the recoil is not straight back - that can explain the flyer. Tried shooting from sandbag or bipod? The system has clearly capability to shoot hole-in-hole
@@blaserlongrange7616 - Blaser, Sauer and Mauser barrels shoot sub moa out of the box so no wonder there. The factory ammo used is very exact, it shoots to me h-in-h, especially the oryx loads
@@blaserlongrange7616 Of course handloads are more precise. I mentioned that to ME it shoots h-i-h and in my rifle, many things can be different between our systems - including ourselves Only that with that jump in the shooting rest is hard to get consistency :-)
@@ktlm100 but if i shot sub 10mm groups 5shots with handloads with the same setup, gun/rest etc it's not the shoting thats fails...common misstake that people judge thing Only beacuse of one video
That would be a very interesting caliber. Unfortunately, however, Blaser always does the same nonsense with cartridges: They bring good things onto the market, but no components such as reloading brass cases or dies. So every caliber goes down again. They would also sell more ammunition if the caliber were more common.
@@blaserlongrange7616 that`s right. BUT they produce in the name of Blaser and I have to buy very expensive ammu in advance in order to get brass. 120 Euro per 20 rounds. Bad deal for me here in germany
Achte auf deinen rechten Ellenbogen, der gehört auf den Tisch und nicht auf die Kante. Deine Schulter ziehst du ungleichmäßig hoch, daher die Höhenstreuung und die linke Hand gehört an den Hinters haft. Etwas mehr Vorlage mit dem gesamten Oberkörper und du schaffst dann auch gute 3er Gruppen ohne einen Ausreißer...
I dont understanding deutsche
@@BugsBunny-st8lf it's not possible to translate
@@blaserlongrange7616
Watch your right elbow, it belongs on the table and not on the edge. Your shoulder is pulled up unevenly, hence the height spread and the left hand belongs to the back. A little more pattern with the whole upper body and you will be able to make good groups of 3 without a breakaway...
smart ass
Sweet!
Hallo.Är lite inne på att skaffa en pipa i 8,5x55 Blaser.Hur uppfattar du rekylen?
Ungefär samma som andra kalibrar som ger 5000joule+
Hi man! Is that giust a 6.5x55 necked up or totally a different cartridge?
404 Jeffery necked down to 338cal
@@blaserlongrange7616 thanks!
Good shooting however the same phenomenon - one flyer. The shooting rack/aid used hops rater much on each shot i.e the recoil is not straight back - that can explain the flyer. Tried shooting from sandbag or bipod? The system has clearly capability to shoot hole-in-hole
It shoots sub 10mm with handloads, the barrel was new in this video and factory ammo..the shooting rest works fine for benchrest accuracy.
@@blaserlongrange7616 - Blaser, Sauer and Mauser barrels shoot sub moa out of the box so no wonder there. The factory ammo used is very exact, it shoots to me h-in-h, especially the oryx loads
@@ktlm100 no it's not, my hand load oryx shoots half the group of the factory
@@blaserlongrange7616 Of course handloads are more precise. I mentioned that to ME it shoots h-i-h and in my rifle, many things can be different between our systems - including ourselves
Only that with that jump in the shooting rest is hard to get consistency :-)
@@ktlm100 but if i shot sub 10mm groups 5shots with handloads with the same setup, gun/rest etc it's not the shoting thats fails...common misstake that people judge thing Only beacuse of one video
That would be a very interesting caliber. Unfortunately, however, Blaser always does the same nonsense with cartridges: They bring good things onto the market, but no components such as reloading brass cases or dies. So every caliber goes down again. They would also sell more ammunition if the caliber were more common.
Grauwolf have reloading dies in stock .Norma produce 3 different ammo ,oryx ,ttsx ,accubond so it's easy to get brass
@@blaserlongrange7616 that`s right. BUT they produce in the name of Blaser and I have to buy very expensive ammu in advance in order to get brass. 120 Euro per 20 rounds. Bad deal for me here in germany
Not a big deal of you want something
Is that a necked up 6,5x55?
Hello, have you hunted with this caliber before? How do you say compared to the 300 and 6.5?
I have shot 3 moose so far and I am very pleased
V0 ?På olika kulor ?
160gr 960m/s
185gr 935m/s
210gr 870m/s
225gr 850m/s
230gr 840m/s
250gr 815m/s
@@blaserlongrange7616 piplängd ?
@@erikfahlstrom2863 54cm blaser mått
Why not 8x57?😏
This is more fun 😁
@@blaserlongrange7616 8x68S It is more fun xd
@@MISIEK825 no, 8,5x55 is more fun, almost the same energy in 13mm shorter case and a bullet selektion in 338cal thats 100% greater
Why 54cm? 🙂
Not to short, not to long