Rustoleum Garage FLOOR EPOXY on an Enclosed Trailer - DIY Garage Floor Epoxy
HTML-код
- Опубликовано: 15 июн 2020
- Welcome back to the enclosed trailer build. Todays episode we are putting in rustoleum garage floor epoxy on the floor of the enclosed trailer. This is probably my favorite part of this enclosed trailer project. The hardest thing for the floor epoxy is the preparation work. I had to sand, sweep, and vacuum the wood to prep for it. Once that is done the rustoleum epoxy is ready to be put onto the floor. If you would have done it another way let me know in the comments. I hope you enjoyed this video!
Make sure you catch up on Episode 1:
• CARGO TRAILER CONVERSI...
Episode 2:
• Installing Plywood wal...
This video reflects my own thoughts and does not reflect the opinion of the Air Force or DOD 
Развлечения
![CENTRAL CEE - GEN Z LUV [VERTICAL VIDEO]](http://i.ytimg.com/vi/VIbidJm9q34/mqdefault.jpg)
Thanks for watching. Let me know if you’ve tried this on your garage floor or even your trailer in the comments. Make sure to subscribe so you don’t miss an episode of the trailer build
Excellent video! How is it holding up?
@@JT-go2ms much appreciated, thank you. Going on almost a year and it’s still going strong.
What was your total drying time? Before you could us the trailer?
You did a very good job! As for the chips - remember it is a cargo trailer floor that you are going to walk on, drive on, drop things on and spill things on - if you really don’t like the way the chips turned out on the walls you can always cover with a black or grey vinyl base. I think you epoxy floor and upturn looks great!
Proper epoxy job. Sand for wood, grind for concrete. Sweep, vacuum, roll your entire project. It doesn’t cure as fast as you think. Wear spiked shoes so you can walk throughout the epoxied area and throw your flakes at the ceiling and they will disperse much much more evenly. Then once your chips and epoxy have sat for 24hrs. Come back and scrape the surface with a scraper to get any loose flakes up. Vacuum the whole floor then SEAL it with a good sealer. Helpful tip is to squeegee the epoxy on a garage floor while someone with a roller follows you
Just bought myself an enclosed trailer, never thought about doing epoxy on the floor, I will definitely be doing that. Looks awesome! Subscribed!
Congrats on the new trailer! The epoxy floor will be a cool feature to add.
Question is how good. Did it work out and how did it last on the wood?
I wonder how has this hold up after 2 years.
I used one step Behr Garage Floor paint and added chips on a previous trailer. It has held up well. I have a new trailer sitting in the driveway and think I will use porch paint on it. Planning on Harley Orange with silver/black non-skid flakes. I may use some aluminum diamond plate in the center of the ramp and rear tire contact area.
That Harley orange with the silver flakes will look really cool! That’ll be a great look. You can’t beat the diamond plate either. Sounds like you’ll have a nice setup.
Hello sir, thank you for posting the whole process. RUclips has speed adjustment so, I just used that where needed. I've got a little pile of questions. I hope that's okay. I am wondering how much, if any, paint/epoxy you had left over? Would it be worth trying to mix some of each A and B into a separate container to preserve the rest for another project, etc? Once mixed, does it get warm like typical epoxy sealant? Does it dry really hard in a brittle sort of way? That is to say, if the floor were to flex with the movement of the trailer, or expand and contract with heat and cold, would it crack or separate at the seams? And final questions, did the the paint fill in your screw holes? Do you think you'd be able to take/back the screws out, paint it, and then replace them for access later on? I also liked the idea to paint a few inches up the wall. I'll def. use that for myself, as well. Thank you for your time, and your service, and I look forward to more videos in the future.
Rayne, thanks for the comment. Once I mixed part A and part B together after I had completed the project I had about a 1/4 of a gallon left over. I lathered on the epoxy pretty thick and I used some of the epoxy on my shelves. I think it's a good idea to preserve some into A and B parts, but I'm not sure how the longevity of that would be when it comes to shelf life once its open and resealed? For your second question of the flex, for the most part, it seems like it will flex decently well. It was only brittle on the edges, but it really wasn't anything to complain about I think for the purposes I'm using it for. The paint did fill in the screw holes and you can't see where they were screwed in. It'll be a pain to replace, but I think if you had good plywood to begin with you'll be ok. One last piece of advice, I went 2 inches up on the wall, I wish I went a little bit higher. I hope that helped!
Thanks for the video. When I watched this I did it and it was the best idea to do. I go to the dunes so sand, mud and water gets in it and its been holding up amazing for 6 months now. I will say do not do it in the Winter cause it will take longer to dry.
First paint side walls then throw the spec on the wall , sweep up the floor then roll the floor and apply the specs. For the rust use meradic acid.
I wish I would have done that looking back at it.
To tackle the rust it's easy...buy POR15, they have it in semi-gloss and gloss, since that's the back of the trailer I'd go with the gloss. There is no prep really either, it bonds to the metal. If you like you could blast it with something first or hit it with a DA but POR15 is the BEST, you'll see it when you pay for it too!
Just as a note to por15 I love that stuff but if you use it anywhere it will get any kind of sun exposure it will break down and come off. It does not have any UV block. But after using just top coat it with a paint that does and your all set. Just learned this from experience.
Beat thing for rust is fluid film it stops rust and when applied it stops the rust from spreading.
You really did a great job. I think your sides look fine. I think you even did a pretty decent job with the flakes. When spring gets here I'm using that exact same kit and color that you did. I have a friend of mine who's going to put the flakes down I am no good at things like that lol. How did that anti-slip stuff work out? Was it worth it or just don't waste money? I have seen where some guys get sand and mix it up in the can or sometime when the paint is almost dry they throw the sand across the floor and once the floor is 100% done they go back with brooms and sweep up all the loose sand. I don't like that method I think it made the floor too rough.
Thanks I really appreciate that! I think the anti slip worked out pretty well. I should have used two bags looking back on it.
I wouldn’t have thought of using sand. I hope yours turns out well this spring, good luck!
Clean the rust off the best you can and use a rust converter paint
Painted the walls with Sherman Williams Tread Plex, and a diamond tread vinyl roll on the floor. Caulked around. Trailer is now completely waterproof/grease proof and can be pressure washed if it gets really dirty
Great job on the video! Thank you... I'm looking at this because I want to know if it holds up with the wood flex underneath... has there been any cracking or chipping in the year this was done? Please let me know... thanks again...
Thanks for the comment. I think the wood has been holding up just fine. There hasn't been any cracks or anything like that. I posted a 1 year update on this.
This is the link to it: ruclips.net/video/OWSLkcQ0R_4/видео.html
how well has it held up?
What size kit do you buy the 1 car or the 2.5 car kit? I have a smaller 5x8 trailer I want to finish the floor on. Thanks!
Thanks for the video does the chips add gripping to the floor?
I think with the amount I put down it helps but mostly for decoration and looks.
a wire brush wipe down with asatone after wire brush and use rustolium rust reformer spray can I use it on my boat trailer works wonders And last for years
Use Coriseal for the rust. Converts the rust and primes in a single step.
I’ll have to look into that, thanks for the suggestion.
Thanks for the video. Is the paint holding up good still? Wondering if it would work on a rough plywood floor for my mowers just heard the paint is hard on breaking down the glue for ply wood didnt know. Looks good buddy.
Much appreciated, thanks. If I’m being honest, this works best for me because I’m mostly walking on it and putting my motorcycle in it a few times a year. I don’t know if it would be good with a constant in and out. I’ve had it installed for almost two months now and it’s holding up well so far. Hopefully that answer helped.
@@Markofalltrades yes sir thank you
I use herculine for my ramp and drive my 52 and 32 in on it all the, solid product. I have wood rot and had to replace wood but herculine side, no tear or worn. Since I want to do the inside, not sure if I want it black but might to because of.the toughness from experience.
Would it make a more durable floor if you put a second coat before throwing the chips I have a trailer on order and thinking about yawing they same stuff. For the rust problem use Rustoleum spray paint no sanding just spray it on I have a 24’ deck over steel deck trailer it has set out side for three years still looks great
Mfj I didn’t even think of doing that. Great idea! Three years and no rust coming through the paint you sprayed on? That sounds awesome.
Thanks for the video. Very interesting. Two questions...#1 - are the chips sharp (pokey) on the feet after everything is dry? #2 - any idea if cracking might occur is this done over a insulated subfloor in the trailer (i.e. put down 1" insulation board, install 1/2" plywood over the insulation, then apply the epoxy to the plywood)....thoughts? Thanks again!
Peter I appreciate the comment. Once the chips have settled in after the drying process I didn’t find them to be rough at all. I did add a non slip additive to it so walking barefoot on it isn’t comfortable but with socks you can’t tell.
I’m not sure about the cracking. I installed this during the summer time of this year and so far it’s held up well with no cracking so far. Hope that helps!
@@Markofalltrades Thanks a million!
3 years later how did it hold up?
Leaf blower to broadcast the paint chips will work really well.
That’s a good idea.
Thanks for the video. How strong is the smell of the stuff, does it eventually go away. I am making a camper and kids will be sleeping in there
When applying it, the smell is very strong. But after 2 days of it drying I can’t smell a thing. Now It’s odorless as far as I can tell. Hope that helps.
Mark of all trades Thank you for the response
I have always done the ryno linear coating on my trailers it always held up well with atvs/motorcycles!
This stuff really isn’t meant for wood as already said but i read of you apply a acrylic latex primer 1st it will bind much better defiantly curious to know how long this lasts for ya! Great video though i am doing my garage floor soon w a kit from spartan epoxies!
After the flakes dry is there any issue with them protruding out of the floor ? Is the surface flat and even?
I can only speak for my floor. I did add the anti slip to the epoxy and the floor feels rough, which is what I was going for. No flakes have come off the floor once the epoxy was set. Hope that helps!
Hey Mark, is this a 6x12 and was the one car kit enough? I have a 6x12 with a ramp I would also cover and I'm wondering if I should get 2.5 car garage kit.
It was more than enough for me. My trailer didn't have the ramp though. It wouldn't hurt to get the 2.5 just so you're not cutting it close.
Good Job ! The rust on your bumper should be sand blasted down to bare metal first > Gray Auto Paint Primer > (Glossy) Rustoleum Black Spray Paint .
Thanks for the info! I’ll have to try that.
All u need is por 15 its pricey but works amazing
Good job, how long did project take you?
Thanks! It took me a weekend. First day was prep and paint, second day was letting it dry.
For the rust, sand it, and repaint
my buddy didn't use the grit in the paint and when his trailer gets wet it's like a slip and slide in there.
I can only imagine! I was debating on not adding it in when I did mine but did not want to regret it later down the road.
Rustoleum does not recommend using this epoxy product on wooden substrates. It is to brittle to be put over soft wood and is prone to puncturing due to the lack of support.
It’s a work trailer. It’ll work for what it is. There’s going to be traffic in and out. Dragging, rolling,etc. it’ll be ok.
@@seanthornhill9503 not really. As the floor flexes it'll crack, start to chip and really come apart. And it'll get messy
Check out how mine came out on enclosed trailer customized slingshot and atv
Acetone...on the oil spots. Very wet rag of it. Hell just pour it on. Wipe dry while still wet. Repeat.
I’m thinking about doing this on my shed flooring. How is the product holding up?
Its holding up really well. I posted a one year review of it on my channel just to show the wear and tear its taken.
Curious how big your trailer is? I have a 7x14 and was thinking of doing this to it!
I believe mine is a 7x12
I used the same box you used, got it at Home Depot and I just finished it but my floor doesn’t shine like yours. Wondering is I miss a step 😄
I didn’t do anything extra for the shine. It may have been the lighting from the sun?
@@Markofalltrades thanks for replying, it’s being a month now and we still so excited about roofing the floor, get many compliments and definitely very smart idea, thanks again.
@@catherinemedina6587 that’s awesome that it worked out well for you! Thanks for the update!
@@Markofalltrades thank you!!!! 👍
Hey, how long is dry time?
According to the box it says 24 hours. I did 48 hours just to be sure.
How did it turn out? Have a box sitting in front of me and want to do it
Here's a link to the one year review:
ruclips.net/video/OWSLkcQ0R_4/видео.html
does it stain easy hard to clean like mine
I haven't had any stains so far. I tried to go with a dark color so if that did happen it wouldn't show too bad
How does the trailer floor look now cause I know that what you used is for concrete
Here’s a year update video I did. It stuck to the plywood way better than what I thought. Going on a year so far and it’s solid.
ruclips.net/video/OWSLkcQ0R_4/видео.html
I like the video but have one question. How was the removal of the masking tape? I would think removing as you went (while the epoxy was wet) would be the thing to do. Did it remove ok after it cured over the tape?
Everything removed cleanly and had a sharp line from the tape. I did a 1 year update on the trailer if you'd like to check it out
that garage floor epoxy gets hard. Do you notice any cracking on it after driving and it flexing/moving?
Just wait for it... it will bend and crack and once that starts there’s no going back!
How is your floor holding up? Any cracks in the epoxy? What are you using the trailer for?
I posted an update video: ruclips.net/video/OWSLkcQ0R_4/видео.html
It's holding up great. No cracks so far. I use it for moving my motorcycle and when I have to move or help someone move.
I bought the rocksolid pearlescent kit basically the same one correct ?
I’m not sure on that, sorry
Would u say it made the floor waterproof?? Or.....
I wouldn't say that. I think it makes the floor more durable. If you were to spill a drink or something small, it wouldn't absorb into the floor.
@@Markofalltrades ohhhh ok well thank u kind sir!!
2 years later how is it holding up?
This is the update video:
ruclips.net/video/OWSLkcQ0R_4/видео.html
How did it hold up? Does it make it not as slippery?
So far it’s held up great. I did a follow up video a year later if you want to check it out.
ruclips.net/video/OWSLkcQ0R_4/видео.html
how has this held up??
It’s been wonderful so far. I’m really liking it! Hasn’t flaked or pealed at all.
Oh man, not chips!
I used it for my garage floor, it wore down in 3 years. Not a good product in my opinion.
Bad Karma I’m sorry to hear that. Did you end up going with a different epoxy brand after this one?
Shouldn't you epoxy the exposed side??? So you spill a coke on the inside, big deal...it is the side of wood that faces the road that needs protection......and omg chips make it hard to slide boxed cargo....