Glad I found this video. The first one had you taking off the box for the pellets. If you follow this video you will have NO PROBLEMS replacing the RTD Probe. Great video.
Awesome Dave, glad you found it valuable! I think I saw a similar video, which inspired me to make this one! It really is a simple process, and hope your Traeger is running smooth again! Enjoy.
Thanks for the help, just ordered one. My tailgater 20 series would sometimes go 200° hotter or just get so cold it would shut off, definitely gonna be stoked if this works!
Found ur vid and very helpful. But I have a question. Did u ever assess the probe temperature itself or just straight replace it? Another troubleshooting g article, mentioned to use an infrared thermometer to determine if the displayed setting is close the infrared reading. I definitely want to try to just limit the repair the probe if that’s the culprit. Plus I’m using a scout, so not sure if a smaller size grill plays a factor
Just out of curiosity, Did you look at the model number on your control panel when you pulled it out? Traeger has used several. My BigTex uses a BAC283 and new models appear to use BAC365. I am seeing temp variations greater than what I would like but unsure whether to actually upgrade my controller to the BAC365. I think I will start with the RTD but need to take some actual before and after data to see how much difference it makes. The new BAC365 does not need P setting.
hey Doyle, I did not look at the model number. Interesting take, and I'd love to hear how your model differs and if this fix worked for you. Have a great summer, cheers!
I put a couple remote reading thermometers in the Traeger and compared them with the existing RTD. They correlated very well and I concluded that the issue was with the older BAC283. After more research, I decided to replace it with Savannah Stoker. Right out of the box, my temps are holding within 10 degrees at 225 or higher. No big overshoot on startup.
Awesome great info. I’ve heard good things about the Savannah stoker. The new Traeger D2 controllers work much better as well. I have the new timberline XL and the temp is always right on point within a few degrees. Cheers!
One feature I really like is the automatic re light if the temp drops too low in the burn pot. You have indicators telling you if ignition, auger and fan are on. It adjusts auger speed and time.
I am having issues with the firepot continuing to catch the pellets on fire and the temps rise out of control. I've tried cleaning the firepot several times and tried replacing the hot rod and the actual firepot. I've tried removing all old pellets and tried a brand new bag. I am continuing to have the same result. With all that said, would this possibly be due to the temperature sensor needing to be replaced?
I’m currently having this issue.. If you haven’t called Traeger- do it! They will troubleshoot step by step. I just received my new temp probe yesterday & will be installing today. 1st step is to make sure the vent cap is only 1/2 inch gap. Next is to make sure the inside tub is degreased (Dawn & water in a spray bottle, scrape out buildup). That didn’t work for me so my next step is changing the probe. If that doesn’t work I have to call Traeger back & they’ll send out a new control panel.
I am installing a new controller and it has the temp probe. So mine doesnt currently have holes. Where does your wires go? Is it just a random hole down in the bottom or side of the "barrell" ?
Awesome man, hope everything works out! Yeah, the new D2 controllers are awesome. I have one now on my Ironwood and Timberline. There should be a little rubber gasket on the side of your barrel, if not, you can just run it through the front of the Door. Does that make sense?
@ItsRyanTurley yup. I had to drill a hole. It's working great. Noce to not worry about the toggle switch for the igniter anymore and to be able to adjust the smoke (P setting)
Sorry to hear man. I will say Traeger CS is great and they will likely help you out. I have the Ranger as well, and definitely took a bit of trial/error to get the temps dialed in. I’ve decided it does not do great at high temps and I try to keep it under 300° when possible.
It’s currently set to 5 (because it’s so hot out). The higher the p setting the longer time between auger rotations. Higher P setting = less heat. I’m doing a P setting video in the next couple weeks!
It's Ryan Turley awesome thank you soo much. I replaced my RTD probe with the help of your video once done I set it to 225 and temp smoker went all the way up to 398 degrees 🤦🏽♂️ calles traeger and they said it could be the controller so waiting for that now. Thanks again. Great video.
Damn bro that’s rough! Yeah they said it could be my controller as well but they would start with my probe. Hopefully this fixes the issue long-term, keep me posted on if the controller works out for you! I also found lifting the lid at the beginning of the smoke can help regulate the temps trying to get down to that lower range.
Traeger is a horrible machine. Something is always going wrong and if you leave it up to customer support, they'll just sell youonepart after another until you've rebuilt your entire grill. Be wise. Shop elsewhere!
Glad I found this video. The first one had you taking off the box for the pellets. If you follow this video you will have NO PROBLEMS replacing the RTD Probe. Great video.
Awesome Dave, glad you found it valuable! I think I saw a similar video, which inspired me to make this one! It really is a simple process, and hope your Traeger is running smooth again! Enjoy.
Just finished cooking and the temperature was spot on. 👍👍👍
Dave M yes brother! I’ve got some other great recipe ideas for the Traeger on my channel if you care to check them out… Smoke on!
Way better video than the Traeger cie video ! Thanks for sharing !
I’m having this exact problem. Set at 225 and running well over 300 consistently. Thanks for the video
Thanks for the help, just ordered one. My tailgater 20 series would sometimes go 200° hotter or just get so cold it would shut off, definitely gonna be stoked if this works!
Did it work?
when removing wires it's always best to tie a pull string with it for ease of routing new wires.
Wow, this is genius! Thank you for the tip! 🙌🏼 (I’m clearly not an electrician) 😆
Great video, calling Traegar this week. Thanks for the info. Chuck
Found ur vid and very helpful. But I have a question. Did u ever assess the probe temperature itself or just straight replace it? Another troubleshooting g article, mentioned to use an infrared thermometer to determine if the displayed setting is close the infrared reading. I definitely want to try to just limit the repair the probe if that’s the culprit. Plus I’m using a scout, so not sure if a smaller size grill plays a factor
Great video! Will this also fix the issue of my traeger not heating up to the proper temperature?
It should, James. Sorry for the delayed reply. Did you try this fix on your Traeger?
Just out of curiosity, Did you look at the model number on your control panel when you pulled it out? Traeger has used several. My BigTex uses a BAC283 and new models appear to use BAC365. I am seeing temp variations greater than what I would like but unsure whether to actually upgrade my controller to the BAC365. I think I will start with the RTD but need to take some actual before and after data to see how much difference it makes. The new BAC365 does not need P setting.
hey Doyle, I did not look at the model number. Interesting take, and I'd love to hear how your model differs and if this fix worked for you. Have a great summer, cheers!
I put a couple remote reading thermometers in the Traeger and compared them with the existing RTD. They correlated very well and I concluded that the issue was with the older BAC283. After more research, I decided to replace it with Savannah Stoker. Right out of the box, my temps are holding within 10 degrees at 225 or higher. No big overshoot on startup.
Awesome great info. I’ve heard good things about the Savannah stoker. The new Traeger D2 controllers work much better as well. I have the new timberline XL and the temp is always right on point within a few degrees. Cheers!
One feature I really like is the automatic re light if the temp drops too low in the burn pot. You have indicators telling you if ignition, auger and fan are on. It adjusts auger speed and time.
Was the original probe reading accurately? My probe seems to read correctly, but cooler than the cooking level.
Awesome! Thank you that really helped! Onto some burgers with fresh sourdough buns! 😍
What was the black connector piece in the middle between the probe and the ends? My wiring is broken, and im about to replace them. (I bought it used)
great job on sharing how to make a job easy 🤙🤙
John Ayers thank you brother! Definitely an easier process than I thought it would be. Really stoked to have the T running smooth again!
Great video brother. I just subbed to your channel
Awesome brother, thanks so much! More content to come…
Thanks great video, just ordered a part...
I am having issues with the firepot continuing to catch the pellets on fire and the temps rise out of control. I've tried cleaning the firepot several times and tried replacing the hot rod and the actual firepot. I've tried removing all old pellets and tried a brand new bag. I am continuing to have the same result. With all that said, would this possibly be due to the temperature sensor needing to be replaced?
I’m currently having this issue.. If you haven’t called Traeger- do it! They will troubleshoot step by step. I just received my new temp probe yesterday & will be installing today. 1st step is to make sure the vent cap is only 1/2 inch gap. Next is to make sure the inside tub is degreased (Dawn & water in a spray bottle, scrape out buildup). That didn’t work for me so my next step is changing the probe. If that doesn’t work I have to call Traeger back & they’ll send out a new control panel.
BTW, I just replaced the probe & it worked!!!
your presentation was great... please turn down the background music.. PLEASE!!!!!
I am installing a new controller and it has the temp probe. So mine doesnt currently have holes. Where does your wires go? Is it just a random hole down in the bottom or side of the "barrell" ?
What model Traeger do you have?
@ItsRyanTurley BBQ 055. And you know... I am already done. Lol. Firing it up now total conversion and its easy-peasy. Starting to smoke now as I type.
@ItsRyanTurley I had to order the thermometer probe separately, but the controller I bought comes with 2 food probes
Awesome man, hope everything works out! Yeah, the new D2 controllers are awesome. I have one now on my Ironwood and Timberline. There should be a little rubber gasket on the side of your barrel, if not, you can just run it through the front of the Door. Does that make sense?
@ItsRyanTurley yup. I had to drill a hole. It's working great. Noce to not worry about the toggle switch for the igniter anymore and to be able to adjust the smoke (P setting)
My Scout sucks I should not have to repair a new out of the box pellet grill.
Sorry to hear man. I will say Traeger CS is great and they will likely help you out. I have the Ranger as well, and definitely took a bit of trial/error to get the temps dialed in. I’ve decided it does not do great at high temps and I try to keep it under 300° when possible.
What’s your P setting set to?
It’s currently set to 5 (because it’s so hot out). The higher the p setting the longer time between auger rotations. Higher P setting = less heat. I’m doing a P setting video in the next couple weeks!
It's Ryan Turley awesome thank you soo much. I replaced my RTD probe with the help of your video once done I set it to 225 and temp smoker went all the way up to 398 degrees 🤦🏽♂️ calles traeger and they said it could be the controller so waiting for that now. Thanks again. Great video.
Damn bro that’s rough! Yeah they said it could be my controller as well but they would start with my probe. Hopefully this fixes the issue long-term, keep me posted on if the controller works out for you! I also found lifting the lid at the beginning of the smoke can help regulate the temps trying to get down to that lower range.
Could have just took the probe out and use the disconnects without pulling the controller
dang you know what.... you're right!
That’s assuming that it’s not a bad wire between the union and the controller. Not likely but that’s my luck
Traeger is a horrible machine. Something is always going wrong and if you leave it up to customer support, they'll just sell youonepart after another until you've rebuilt your entire grill. Be wise. Shop elsewhere!