Changing the rear suspension should be easy..... right? WHOOPS!
HTML-код
- Опубликовано: 14 окт 2024
- Modding the 67 Camaro doesn't go quite as planned....
Check out Mat's Channel at / @lethalgarage
Follow me on twitter! / jayztwocents
Subscribe to my Technology Channel! / jayztwocents
Like my facebook page! / jayztwocents
New name for channel, JayzTwoConcussions
only two? lol
JayzTwoLeftHands
More like Jayz2000Concussions 🤣🤣
God damn giving the Three Stooges a run for their money. I haven't laughed so hard in a long time!
who is who Larry = Jay. Currly is Phill. Matt is Mo
Phil's editing really adds a whole additional dynamic to every video. He's really come into his own on the channel.
Abit late but totally agree, i don't know why i haven't checked out jays car channel until now since im just as much into cars as pcs, but I've been into cars and worked on them alot more so jay and would be my padawan xD
this is some of the funniest things i have seen in a while 10/10
So funny, can’t stop laughing
My nephew can't understand why I was laughing so damn much. Then again he's kind of dense and only thinks his type of humor is funny.
@@rogerj412 I think the reason it is so funny is that if you have ever worked on your vehicle you have had this stuff happen.
@@Sideways117 Honestly, if you've done work on anything. I've spent the last week doing flooring at home, and almost all of this translates.
This is the hardest ive ever laughed for 23 minutes and 24 seconds straight. Thank you Jay.
@Ronoc Akim the part where he called the axle tube a diff...
Tbh I visit 2centz for the personalities more than the tech at this point. Same with half a dozen other tech outlets here. Basically y'all could recreate Will It Blend and I would watch. As a car guy, I will (of course) watch this so hard.
Damn I am glad I did. Just for the edits.
Jfc. JFC 😂
Agreed
Yeah I feel like as I start following more and more technical channels, the others become more about entertainment and niche content rather than informative.
Which is not a bad thing, just a random observation
@Lassi Kinnunen Can't refute
This was the best install I ever did! The love here was worth the pain!
Its really him????
epic episode!!!
To be fair, a lot of the pain featured was Jay's, but I'm glad you did too! This was a ball to watch, even without the injuries.
Hopefully the mrs aggro wasn’t too much Matt
I think I almost died watching this, I was laughing so hard. I have the same kind of luck as you Jay. Honestly I don't consider a car project done unless I smash one of my fingers, bruise somewhere and end up bleeding. But anyway, long time fan of both you and Matt, so it's awesome to see you two working together. Will continue to pop in and watch the shenanigans. Hammer on good sir!
The car gods demand blood sacrifice to bless a build.
Hey man I like this. It's a break from the tech stuff. Too bad you weren't a Mopar guy but this is still awesome. Cars and Computers!
I have the Holley EFI on my '71 Corvette 454. Yes Jay, you definitely want the EFI rather than a carb. I ran a carb for years and the EFI is much better.
Yep...Just ask Eric The Car Guy...he screamed CARB for weeks/months...ended with EFI. I still think part of it has to do with the fact that they really don't make them like they used to. :(
For me I plan to go EFI after I learn Carb. I thinks it's a dying world that has some benefits. The biggest issue people having is not understanding carbs.
I get what you're saying... but as some one that has likely owned more carbs than most people have owned cars... I genuinely prefer carbs on my hobby cars. Simple, easy, fun to play with, and again... I have EFI... I have carbs... but if I had to give up one... it isn't going to be my carbs.
@@Lethalgarage What do you feel are the benefits to carbs other then them being cheap? I am really interested. Maybe you could make a video on this if you havent already. From my perspective fuel injection is just better: its more reliable, more efficient, provides better throttle response, adjusts on the fly for altitude changes, it doesnt fall out of adjustment and need to be played with from time to time and I think its fair to say that there is a greater power potential with fuel injection. Personally it seems to me like the only benefits to carbs are the old timey feel and they give you something to tinker with on your car from time to time.
I love Phil's editing xD
Comedy gold right here folks. If nick was there then it completes the package.
While I am no expert on car assembly and car mechanics I am glad I subscribed to this channel solely for its entertainment value. I dont think I have laughed this hard in a while at a video I watched in a long time.
So when Jay hit his head with hammer, at the same time i was drinking coffee. So you can guess what happened.
Now you are officially a sprayer! 😂
XD better then a spray bottle
u had a brilliant idea to prevent it from happening again?
I started crying out of laughter.. 😂
Did you continue to enjoy your coffee?
Holley EFI is definitely the way to go with them having learning capabilities
When he said he wanna do a LS7 carburated I thought why downgrade such a great engine?
You can still get EFI units that look like carbs also.
I don't know a lot about cars but I enjoy this videos!! Thanks jay
That was some,of the most entertaining struggle ive seen in quite some time. Thank you sir.
This was 10X more entertaining than I expected.
As an Auto technician this is very entertaining but also painful to watch🤣🤣🤣
I absolutely think you should go with the Holley EFI system. Such an intuitive system and easy to get set up.
Phil's editing is on point
This reminds me of Home Improvement when Tim was working on his cars and always got hurt somehow. Loved every bit of this video.
Lol I love this. I have a Honda I've been working on for 10 months and I've been having non stop problems. It's nice to see I'm not the only one struggling and hurting himself
Jayz car channel has 1000% more bloopers than Jayz tech channel
Classic car + Jay + Power tools = great fun for everyone!!! LMAO
Phil, you are fantastic.
these kinds of videos are definitly my favourite
just want to say, the edits are on point. thanks to whomever edited it.
Gotta make more of these. One of the funniest videos you've made.
10/10 Will watch again.
Also an f for Jay, I hope you aren't hurting still.
This channel is such a nice change of pace. You get to see a different side of Jay. I'm digging it Jay, Keep the videos coming!
Loving this "series", I'm learning so much about cars.
The raw footage is golden.
I hope Mrs. J has a first aid kit available. ;) LOL, good video!
@JayzTwoCars You good Sir have summed my entire 40+ years of working on cars and trucks in 23 min video! The mistakes, pains, the "Test fits", and so much more! I had a 68 RS Camero, many trucks, 280 ZX, and my current project is a 94' Jeep wrangler. SO yea I know about crap the previous owners can screw up and what it takes to get things "Right" or as damn close as you can! This video was great Sir!
Man, I was crying in laughter for 20 minutes. This is exactly how me and my buddies working on a car goes down, keep up the vídeos pls, I’m loving it.
This video is pure chaos.
I love it
This is the best slapstick humor of 2020. Need more Jayztwocars updates!
Changing the rear suspension should be easy.. AKA Pain, dirt and laughter. Brilliant video guys!
I find this more entertaining than the tech stuff you post on your other channel, and I'm not a car enthusiast so you're doing something right. May be my inner top gear humour kicking in.
Please more of this!!!
I absolutely love the 67 updates, keep them coming
On the next, Phil films two giants... OMFG, haven't laughed this hard in weeks, epic job all...
Jay...bro, thank you for this video! I have been deployed for 6 plus months now and this literally made me cry I laughed so hard! I can’t wait to get home and get back to my project and work on her! Thanks again!
As a mechanic I fully appreciated this video and it was so wholesome lol. More more more! I can't wait! Haha
This video reminds me of me and my friend at tech school trying to drop our first transaxle. The banter, the jokes, the busted knuckles. I miss those days.
Wtf, I've been following Matts channel for a year, and the computer channel for a year, now you're both in one video???
My worlds are colliding! AHHGGH
I'm running Holley sniper tbi efi and I love it. I recently installed a vortech v3 si supercharger. It's their entry level carbureted kit for sbc. Tuning the fuel and timing is super easy with Holley efi. You wont be disappointed! I'm currently running 8psi of boost at 5500rpms, or 155kpa for you efi guys. If you plan to make bigger power, get the super sniper. The standard 650hp sniper isn't quite enough for boost. I'm at 394lbs/hr of fuel with 4 100lb/hr injectors.
Unfiltered Jay and Phil is the funniest thing ever. Keep it up.
Phil, thank you for doing such an amazing job with the editing. I laughed so hard this entire episode!
The amount of times Jay has injured himself, Matt tasting metal from the 60’s, and Phil being the cameraman. This is the best fucking reality tvshow.
I laughed way to hard at the song edits.
Phil's edits are the best thing ever ngl
@JayzTwoCars Maybe look at an intake like the Holley 300-269. It would allow you to run a carb style throttle body so you can put an old school air cleaner on it but still run port injection so you keep the full tuning/efficiency benefits of EFI.
Judgement Jay...Phil has officially got my respects!
8:13 "I think I just sh*t my pants" look.
Thank you. Thank you. Thank you. THIS was the best 23:25 second video I've seen in all of 2020.
Run the Holley EFI. It is just such a great system and it allows you so much control over how lthe car performs. plus tuning on it just becomes so much easier with it.
I'm a Mustang guy but kick ass Camaro. Friend of mine is building a 70 fastback Camaro with aluminum head 427. He's still doing body but it runs and it's a Monster.
I love all the memes in this videos. Plus the Harbor Freight jack (which I have an identical one) is awesome. Huge fan of the video editing work along with old school cars like this. Great dichotomy with the tech channel. Cant wait for more content.
Awesome content.
I only understand a quarter of what you are talking about but it looks fun.
Please don't stop vlogging on this.
i love these videos, really inspires me to work on my car
I have their split monos and caltracs with Viking shocks.
I went with Quick Performance for my fabricated 9" Ford. Well worth it and amazing service.
Epic timing on Phil's part with "that what's she said" on having it in eye and mouth lmfao 🤣
I still have tears in my eyes.....Best car video EVER
An artist suffers for his craft.
Oh my goodness by 17:26 I was dying of laughter. Jay. Please don’t injure yourself man
Jay is funny, pure joy in this video
This vid has been making laugh basically non stop! I've not laughed like that in a while! The way the three of you bounce off each other is hilarious! 🤣🤣🤣🤣
Glad you are okay Jay.
Go with the Holley Sniper EFI. Just installed mine last week. Love it!
I love the tech, but honestly i think i love this channel so much more!
Had me in tears the whole time! Thanks guys, I really needed a laugh today!
Don't feel bad, Jay. I once dropped a GM hi-torque starter on my head from about 2 feet. Got a nice concussion from it. Hot rodding is always interesting.
Love the car channel. Keep posting here more often.
My only regret in watching this is that i cannot thumbs up twice for how funny this was!
this channel is better then the original!!!
Great video, I'm glad your ok. Also I always like the old meets new concept.
Jay brings a whole new meaning to 'idiots and cars'.
I'm laughing and feeling your pain all at the same time. Dropped the sub frame and entire suspension off a car from the 80's and the rust..... oh the rust. It was the biggest PITA. I don't even want to know what it took to get the front control arms off.... we;ll just say I ended up having to get new control arms.
I'm just watching this and it's the funniest video I've ever seen!!! Not just Jayz vidoes - but ANY video!
It's so funny, because I've been there/done that with my buddies as well!
This was hilarious! Golden content here Jay. Editing was on point! From one Phill to another, cheers!
I'm really enjoying these videos.
This is reminding me of working on my old charger, me and a friend rebuilt the top end in my college parking lot (neither of us finished school).
But by far the worst was helping a buddy put a M21 (4 speed) into is 67 Nova, during a cold NJ winter......
Hey, I'm sure you have plenty of comments on here like theis. But I came from JaysTwoCents channel. Been subbed for a while here too. Glad there is new and constant content here as well. Love the car stuff. Wish I knew more about cars so maybe I'll pick up a thing or two from the channel. On today's episode we learned how to hurt yourself while dealing a badly repaired car. Good luck on the build. Looking forward to all the new content over on this channel.
its always fun to watch you with a new project weather its a computer or a car ...... but sometimes i wander if you will survive some of these ahahahaha love the show jay keep up the great work
6:56 I'm DYING!!! So clever!
This was one of the most entertaining videos I've seen from you Jay!
Keep it up
best vid from you guys EVA. love it laughed so hard. had to explain myself to the misses. see this computer nerd working on a car. that line on its own is funny.
10/10 for entertainment.... Great video thank you
Oh man, I miss "Two Idiots" series, but hey, this one was awesome as well :D
This may be one of the funniest videos this channel has ever posted. I loved it
Wish all your videos were this long tech videos too
This is as really as it gets. Best way to Describe this video jay. love it
What a blast! 🤣 But when changing ratio, will you chech teethconnection with the pinion gear and the "crown wheel" (don't recall the right translation) wrong one wears out the teeth fast and give more friction, distances need to be accurate for the right alignment. Also, don't forget the spedometer will show way more MPH than actual speed, a nice gps app on a phone can make wonders and save you from being overtaken by great grandmas! ;) (If there are no separate gears for the transmissions speedometer connectors to swap out!?)
And... at least get a cheap pair of glasses, the ER are filled with other needs than a chip in an eye!
Hilarious video Jay! Just two dudes having a good time despite the usual (and unusual) headaches - pun intended - of wrenching. Keep it up!
Well this was truly fun to watch!
not to be that guy, but this is exactly how thing goes when you DIY at home. I love it - too bad I didn't make any videos of me 20 years back doing this. But let's face it, I didnt (and don't) have any friend to do the cam anyway.
keep on going man, 10/10
Top notch editing!
Everytime I see a video from you I'm like wheres my 67?!? Lol
This is better than his regular channel!
I didn't understand a word jay talks about but I am watching
Jay I love both of the camaros. But I just want to say that's a nice axial wraith you got.