Installation Thermalright Assassin X120 R SE ARGB CPU Air Cooler, ARGB (fail)
HTML-код
- Опубликовано: 18 фев 2023
- It appears in this video, that either the fan is bad, the port is dead or I have a setting off via BIOS to shut off ARGB. Apologies for not having a perfect video...it happens unfortunately. We will probably redo this with a better motherboard in the near future and different CPU.
Развлечения
I was pleasantly surprised how good this cooler is for the price, you can't go wrong with it
I just bought one, it's coming in the mail. looks like a solid unit for the price forsure!
Hello, I have seen many videos of reviews of this cooler, so I have a question and I hope you can help me. There are many people who did not place that piece of iron that you placed down behind the motherboard (exactly behind the processor), so my question is: Do I need to put this piece or is it unnecessary? By the way, my motherboard is Asrock B550M Steel Legend. I will be happy if you answer me
In the video he is using a motherboard with an Intel socket (1700 to be exact).
Since youre on AMD's AM4 Socket (judging based on the B550 Motherboard you mentioned), you wont need to put a backplate behind the motherboard to install the cooler.
Your motherboard comes with one already.
you can refer to the cooler's manual, that can be found online, to check how to install it.
@@Poyo69 thank you so much, that helped me a lot
This is one of the best guides ive seen keep up the good work💪
If the motherboard has no rgb output pins ou can gets kits that run their own light controller like the "upHere 5V PWM ARGB LED 120mm Case Fan". They can run off their own button control or you can solder the leads to the reset switch to change colors.
Dear sir, do you think this cooler will work on x99 moterbord with 2011 intel soket?
Thanks to the lord and the person for creating RUclips. And thank you for creating this video. I nearly install the backplate to the front. The manual is not very clear 😂😂
I recommend not tightening the metal brackets, and dry fit the heatsink first (screw heatsink on metal brackets without removing protective plastic or adding thermal grease) then tighten the metal brackets, remove heatsink. Test the metal bracket locations by dry fitting the heatsink one more time, then remove plastic, add thermal grease and install/tighten the heatsink all the way. Otherwise you may find yourself not being able to align the heatsink screws properly, thus causing a mess...
Hello, I have a question, my motherboard doesn’t have places to place the back part of support for the cooler is that a big problem or I can use with just front parts already attached on motherboard?
which you think is better this or the assassin king
Nice video
Thanks for the video, the only thing stopping me from buying this ThermalRight cpu cooler is that I've seen some people in reddit or videos saying that the LGA1700 brackets and overall pieces doesn't come included and also was able to see ThermalRight selling the kit separately for a higher price than the actual Cpu Cooler, I need suggestions for a Cpu Cooler on the MSI PRO B760M-A WiFi DDR4 with i5-13400F
@armillo dillo Thanks a lot, I got it last week, all good, it came with all the versions included, just waiting to buy the processor and Mobo now
Hola, no es contraproducente volocar el ventilador alli? Digo, no seria mejor colocarlo del lado contrario ya que asi bota el aire caliente mejor, o es que el ventilador aspira aire en lugar de expulsarlo?
Is any different between assassin x 120 R se vs assassin x 120 se (missing R ) on Amazon I see this product but missing R (revise or refined) is it the same product or different.. thx
In terms of performance, they are pretty much the same. Just get whichever one has the best deal on it. Get the Peerless Assassin though, not this model in the video, as the Peerless has better performance and is often cheaper.
Friend, I have a question. I want to install this cooler but I have a motherboard that only has an RBG connection. This will not cause any problems if I try to connect it to that port.
ARCTIC P12 PWM PST RGB, Cooler Master SickleFlow 120 RGB, DeepCool RF120 RGB are 4-pin RGB fans that work. If you find any on offer over the more popular ARGB 3-pin.
Just noticing bad camera angle at the beginning...on top of: It appears in this video, that either the fan is bad, the port is dead or I have a setting off on the motherboard for the ARGB. Apologies for not having a perfect video...it happens unfortunately. We will probably redo this with a better motherboard in the near future and different CPU.
Stuff happens, thanks for the tutorial regardless 👍🏼 Installed my first aftermarket cooler thanks to you.
Hi ! Thanks so much for demonstrating how to install it. Looks so much easier than the freaking Hyper 212, the process is so fiddly. Did you manage to get the ARGB running ? I saw that they fixed stuff up in their BIOS updates so maybe it was just a matter of updating ? I am actually looking to buying the same exact motherboard for my i5-13500 (or 13600K not sure yet) so I appreciate the vid :) Is that the only ARGB connector ? Cause I'm planning on adding a 120mm ARGB fan so not sure if that + the CPU cooler's pin would fit or are they different headers to plug into ? I'm pretty new to the whole RGB stuff so it's confusing. Thanks again !
@@KrazyShark I baught this fan and a Asus strix B660 G motherboard, a good MB, but same pb with argb 3 pins, no light from the fan, I'm so sad. An idea how to activate these ports? in Aura Sync it don't see my fan also!.
thanks again
@@astrolivier76 Isn't ARGB fans supposed to be 4 pins ? I'm not sure, I've never used ARGB fans yet.
@@KrazyShark Hi, No, like the video, this is a 3 pin, but I found a video and we can see that I must to activate an option in the bios. I will try this more later, I'm working now!
You have to turn on the RGB through the Gigabit software. I have the same board!
Hi
😶😶😶