Episode 2 - Corsair 6500x
HTML-код
- Опубликовано: 13 апр 2024
- Episode 2 - Corsair 6500x
Welcome to the channel! This video focuses on doing multiple bends on one tube. I hope you enjoy it! There will be more videos coming, so please subscribe!
Build:
Case - amzn.to/3xyi7GO
Motherboard - amzn.to/4azIgDB
CPU - amzn.to/3JnmPtq
RAM - amzn.to/3xyi8um
GPU - amzn.to/49G2Elg
M.2 - amzn.to/3JfPbG6
PSU - amzn.to/49G2Fpk
Fans - amzn.to/3TZ6cJv
Water Cooling:
CPU block - amzn.to/49A6nkr
GPU block - amzn.to/3TUU4JH
Pump - amzn.to/4cZtMyv
Radiator - amzn.to/3Jk0OMs
Tubes - amzn.to/4cTbQFV
Fittings - amzn.to/4ayltIn
Extras:
Pop Tubes - amzn.to/3Q1vGVu
Drill Bit - amzn.to/3Jk9jHc
Mini Miter Saw - amzn.to/3VZco6Z
Tunnels by Purrple Cat | purrplecat.com
Music promoted by www.free-stock-music.com
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
creativecommons.org/licenses/...
Corsair’s build😊
Great work! Also stunning pc!
Very good craftsmanship and nice build. Weldone my friend👍👏👏
You have skills my dude! I always have to one of those guides when bending
Nicely done!
Feel joy to see it stay below 40c.
Very nice. There should be a fire-sale on ASUS gear very shortly! Rolling in the aisle laughing my arse off aside, you very much hit the ground running, matey. Kudos, keep 'em coming! The 'Pop Tubes' use was the cherry. But where is Part 1 and the painting tutorial?
Very nice.
Thank you very much ..love when you bend the tube look easy but when i try not easy
You can do it! Practice making 90 degree bends. Take it slow and don't force it.
Looks amazing. Is that gpu not mounted? Just held in place by the tubing?
mostly by tubing, but there are available GPU mounts out there for this purpose amzn.to/3RLIxfj
Woaa so amazing…🇺🇸🇺🇸🍀
Great video - you made it look easy - makes me want to get this case and build a custom loop. Do you have any idea what sort of fan rpm you get when the PC is under full load/gaming? Just wondered if it sounds as good as it looks!!??
I'm using the QX120 fan and I generally set my fans around 60%, that's around 1200-1500 rpm. With iCue, I do have a gaming profile which it'll switch to 80%. Keep in mind that these components are high end and they do produce a lot of heat.
@@Keep-IT-Cool-Custom-PC Thanks for the informative response. The fan RPMs are higher than I would have thought for triple rads, but like you say you're running high end components. The QX120 fans look amazing, but I guess I would get lower RPMs if I went for different fans (I've just seen this ruclips.net/video/8QNe1kYQ49k/видео.html )
Is that the Corsair Vertical GPU Mount? I was told couldn’t fit it with a Corsair XR5 360mm rad and QX120 fans on the bottom of the case.
No mount since it couldn't fit a 360 radiator with the fittings on the left side. It can be done when you orientate the fittings on the right hand side.
For this tube run, the GPU block is held by tubes going up into the CPU block and to bottom radiator. The 90 degree PCIE riser also provides support.
Can I get a link to the GPU Riser you used?
@@captain_insanogaming3085 I used this riser amzn.to/4dfOhY8
distro looks nicer. the end
Could you give me gpu water block information? I could find only black color.
I painted it white. Unscrew 4 corner screws in the back. Lightly sand it, and give it multiple layers of paint
Which vertical GPU suport did you use?
@@Cairam0101 amzn.to/3XSUcx1 none, but this will do. You'll have to buy a longer riser
imagine still using a screwdriver for the m.2 ssd slots lol
Do you sell these? Take my money!
Not at this moment. Someday I will!