Very useful. Thanx. But, as a matter of fact, i found out that my multiswitch plus works on midi channel 1 so, in case you can’t make the switch send the message to the sunset, try modifying the midi channel on the sunset to one of the other three available channels.
Thanks! So if I hook my riverside in the next outlet and put three presets the same as you did and then hook the compadre up in the last outlet and do the same then when I push button A it would pull up all three pedals with the first preset that I entered on each? It’s so darn confusing and the manual is just terrible.. just awful directions or lack of directions. Thanks for this video it has helped!
Does the multi-switch override the pedal? What I mean is, if you save three presets to multi-switch, is that all you can use, or while you're playing can you access five settings - A side of pedal, B side of pedal, and then A-C of multi-switch.
Thank you this is a great video! Just two questions.... 1) Did you have to download any updates to your sunset for the multi switch to work? 2) does that mean you can have up to 5 overdrive options?
Thank's Daniel. Well, my Sunset was brand new from the factory and I did not have to upgrade. 1) I think if the firemware is 1.0 or older you have to upgrade. 2) It depends on how you look at it. You can store 3 preset on the Multi Swich Plus and it stores everything, including Noise Gate and dip swich settings. So e.g. you can store preset with only the A side turn on but the settings on B side are also stored and you can turn on B with the setting you stored. So you could say it's more than 5 option.
Hey, thanks for the great video! Just one question. After storing presets in A, B and C, I noticed you hit the C channel again to bypass the multi switch plus and the pedal. Did it also work if you hit A again? On my multiswitch plus if I have A ‘on’ or lit red when I hit it again it doesn’t bypass it. And when I hit one of the sunset’s A or B individually to remove the effect im not sure if it’s back to the setting I have dialed in or the setting on the preset
Hi, I just used your video to configure this combo. Thanks. But the problem i got that it lost the presets once the power has been off. The problem was the midi channel setting. You have to put it to midi channel 1 instead 4-16.
Hi Bro, I tried and success, thanks. But I don’t know why after I power off my sunset and on again, all the settings were gone??? Did you have the same problem?
Видеоклипы
I’m setting my Sunset up later today with my Strymon Volante and Multi Switch Plus. This is VERY helpful. Thank you for taking the time to post this!
Very informative, thank you for sharing 👍
more helpful than the manual! thank you!!!
Thank you! Saved me an hour figuring it out... Great video!
Thank you for helping me set up my riverside. It’s same process 👍
Thank you very much. Mine is on the way and this is much more difficult than setting it up for the Iridium. This helps a lot!
Well done! Your video will definitely help me. Thank you.
Very useful. Thanx. But, as a matter of fact, i found out that my multiswitch plus works on midi channel 1 so, in case you can’t make the switch send the message to the sunset, try modifying the midi channel on the sunset to one of the other three available channels.
Thanks! So if I hook my riverside in the next outlet and put three presets the same as you did and then hook the compadre up in the last outlet and do the same then when I push button A it would pull up all three pedals with the first preset that I entered on each? It’s so darn confusing and the manual is just terrible.. just awful directions or lack of directions. Thanks for this video it has helped!
Thank you! :)
Wow!
Does the multi-switch override the pedal? What I mean is, if you save three presets to multi-switch, is that all you can use, or while you're playing can you access five settings - A side of pedal, B side of pedal, and then A-C of multi-switch.
Amazing stuff! Would this workaround apply to a Strymon multiswitch non-plus as well? Thank you
Thank you this is a great video! Just two questions.... 1) Did you have to download any updates to your sunset for the multi switch to work? 2) does that mean you can have up to 5 overdrive options?
Thank's Daniel. Well, my Sunset was brand new from the factory and I did not have to upgrade.
1) I think if the firemware is 1.0 or older you have to upgrade.
2) It depends on how you look at it. You can store 3 preset on the Multi Swich Plus and it stores everything, including Noise Gate and dip swich settings. So e.g. you can store preset with only the A side turn on but the settings on B side are also stored and you can turn on B with the setting you stored. So you could say it's more than 5 option.
Sveinbjörn Grétarsson great thanks!
Hey, thanks for the great video! Just one question. After storing presets in A, B and C, I noticed you hit the C channel again to bypass the multi switch plus and the pedal. Did it also work if you hit A again? On my multiswitch plus if I have A ‘on’ or lit red when I hit it again it doesn’t bypass it. And when I hit one of the sunset’s A or B individually to remove the effect im not sure if it’s back to the setting I have dialed in or the setting on the preset
@@adityavijayakumar7215 all of them bypass if I hit them again
Does the settings on the pedal work also plus the three presets or just the three presets?
Hi,
I just used your video to configure this combo. Thanks. But the problem i got that it lost the presets once the power has been off. The problem was the midi channel setting. You have to put it to midi channel 1 instead 4-16.
Yes, that’s right, it’s midi channel 1 that works best. My mistake in the video.
Hi, I have got the same problem. I Lost the préset when power off. How we make to change the midi chanel ? Thanks
Do you get a split second of silence when you switch between presets?
No, I don’t
Hi Bro, I tried and success, thanks. But I don’t know why after I power off my sunset and on again, all the settings were gone??? Did you have the same problem?
i’m having the same issue. i’m not sure how to save the settings
@@jennsouloafter i did the firmware recovery again , and follow the manual to do again, everything work well now. You can try it:)