Good Luck. I want to mod a case too. The one that I have right now is one of those old generic ones with the PSU on the upper part of the case. I will be easier to buy a nicer case and mod it.
OMG I thought the contain of this channel should be spreading AF. U definitely deserve much more Sub. than how many u have right now. I truly hope to see more videos from you. please don't stop the channel. It will grow for sure man!
The stuff you do is amazing. I'm wanting to get into doing a lot of custom stuff because I just enjoy building pcs. I'm gonna try and do some of this within the next few months. Wish me luck!
its amazing i like it very much and after my university exams i am planning to make a backplate and modding my zalman z9 neo case into black-white theme thanks for all this footage and keep up with the good job you do!!!
I have this case and i came here in this video by accident,and just couldnt stop watching till the end, great craftwork, but you should use always a carbon filter mask while painting. even is in short times, i paint comercial airplaines and u should think about it. One Mod i hould like to see someone make,is to replace the acrilic door ,by tempered glass, while still be possible to close with the door knob. Great Job again,keep up
I like the small details about this build, like cutting the mesh and placing it over the front light when you could have just left it plain. If you're going to use LED strip lighting in future builds, I recommend you buy a reel of it instead of individual strips so you don't run out of length. To correct light diffusion, I turn the led strips sideways so that the light shines directly through the edges. Great for edge lighting effects! Hopefully that works for you.
+ImmodderNation Send me a link to the led strips you use via Facebook or something. I've seen some led strips that are 5mm wide which seem great but I can't find them anywhere except from Chinese sellers
Hey dude, just watched this video and instantly subscribed, thats amazing what you did to that case. I have the same case but in black. I'd pay for you to do that to the front panel of my case. So sick dude with light strip!
Absolutely amazing what you did to that case man! Off topic but what RGB light strip do you recommend to add some light to your pc? So many options on amazon, not sure what to go with.
+SliimjimHD Anything that you can power with molex or a mobo header. It doesn't really matter what you use unless you want cool software like nzxt cam, in which case you'd get nzxt lights :p
Thank you for fast reply. So basically you precisely cut corsair vinyl logo with that Silhouette thing and pasted it on transfer paper and than on your front case cover?
Good stuff. I think I read somewhere that painting the led strip with maybe reflective colored paint,you can make the light come out better through the sides,which is where you want it in this case(pun intended). Also was that drill looking thing an engraver?
Dietec Yeah,basically you paint the half through which you don't want light coming out,and of its reflective,it bounces back through the side with no paint. If we do some engraving and shine an led on it,would the engraving glow? Vinyl cutter is really handy,going to have to check if a local store offers such a service.
Hey, i already commented on this but I have the same case and I have this spot between the motherboard and right side fans, where the slots for the cables are that just looks plain ugly.. what do you recommend for this? I'm going to be spray painting some of the case so I might just do that too, on that note, why did you only spray paint the left side of the case??
Dietec hope things are going well I love this channel. especially this video since it's my favorite color scheme and theme... my builds are always futuristic white, blue, and black
Dietec indeed. I wish I could show my PC but my set up isn't done yet so meh... but imagine the case Riotoro CR280 with all white and a blue stripe where the red line used to be..(the case is originally black and red).. I also modded in a osu cover thanks to ur helpful vids
What brand of acrylic do you use? I'm interested in getting into modding with acrylic (well modding in general). I know to use the cast stuff but was wondering if there's a better brand than the rest?
I have dell optiplex 980 desktop not tower can i trasfer all its stuff including motherboard psu and all other stuff in a tower case or in this case CaseCom VS93 Buster Value Series Mid Tower Case
it came out nice, in the beginning i was like omg i hope he has good ventilation with all that dust and spray, lol. but there was one thing i would if done different, the design on the psu shroud I would of put led strips under the shroud and let the design light up. like some kind of see thru follow the same pattern to match the front led, but thats my opinion. but the modification is nice.
This is a common thinking of people that many if the modder get all the products for free which is not true in most cases. Only very famous people get sponsored. Mostly companies look for popularity in a modder than their talents
make a video for missing side panels i did put plexi glass with tape but you might have something better ! keep up the great content and fix the links for your instagram etc on older videos !!
Oh, and if you still have that case, could you do me a favour ? I'm searching for a good case for my new project, and i think the 400c could be it, but i want to mount the GPU vertically, and i don't know if the 4cm GPU fits between the PCI slots and the window. Is there enough space ?
+jigsoree and +Dietec I would not call it "trash music", but it is not exactly my style. Then again, all music has value and meaning to someone. Keep playing what you like, and what your viewers want to hear. In my case, if I do not like the music, I turn down/off the volume. I may be old, but I do have that capability. LOL. #PCMasterRace
Sick mod bro! You're getting better each time!
+Kevin Besnier Thanks! That's what happens when you practice lol
he really really is! watching the growth is mad inspiring!
BTW Dietec, your tutorials about making a gpu cover and a psu cover really helped me alot! I would love to show you them!
+Kevin Besnier Send me the pictures on Facebook or Instagram
I think I'm gonna wait for a bit, waiting on my new motherboard and cpu which will fit prefectly with the mods I did.
Also i do personally like the music you use in your vids. Keep up the motivation dude
Great mod bro! Glad to see you're getting better! Great content keep it up!
Damn that looks awesome man! editing, choice of music and the way we see gow you did it is awesome too! :D Making your way too the top!
+Louis Lemahieu Got a Monstercat license, so music should be better forever now :P
This is a mod I think I will be attempting remember me when your famous
Good Luck. I want to mod a case too. The one that I have right now is one of those old generic ones with the PSU on the upper part of the case. I will be easier to buy a nicer case and mod it.
great work man, definatly making some killer stuff =)
+Designs By IFR The man's a genius people.
hahahahaha xD
haha yeah dude
now this is legit! was getting ready to do something like this too, nice to see someone else do it so i can get an idea of any issues id have lol
I have no idea why anybody would dislike this, besides jealousy.
This was one hell of a mod, congrats!!
Awesome man loved this one in every way! The color, the design ,everything
I'm still speechless....really fantastic work man👍!!
The king of Dremel is back!
OMG I thought the contain of this channel should be spreading AF. U definitely deserve much more Sub. than how many u have right now. I truly hope to see more videos from you. please don't stop the channel. It will grow for sure man!
+Martin Zhao Oh I definitely don't plan on stopping! Thanks for the encouragement man!
OMG ! I love this build/mod soooo much ! You're killing it man ! ^^
You are a real artist! Im a huge fan. Following and showing friends. Thanks!
Thanks to you I'm inspired to do some light moding to my next build
The stuff you do is amazing. I'm wanting to get into doing a lot of custom stuff because I just enjoy building pcs. I'm gonna try and do some of this within the next few months. Wish me luck!
+K4H Predat0r I'm glad I jumped down this rabbit hole, you'll probably like it too ;)
Good job dude! I like the inner LED light works!
You're getting better. Keep up the hard work. Still waiting on that custom loop build tho ;)
+s1ndicate_88 Ahh me too! I think about doing that every single time I see my computer. So, every day
You have GOT to do more vids like this
Nice job man. I really liked it!
Dude, that turned out great!
Wow I have that case and i'm only willing to spray paint the PSU and HDD tray cover white! Awesome job!
I love the front on that mod great job
its amazing i like it very much and after my university exams i am planning to make a backplate and modding my zalman z9 neo case into black-white theme thanks for all this footage and keep up with the good job you do!!!
Did you consider using the Corsair Lighting Node PRO for the LEDs? I might copy this technique, my case is getting kinda bland on its own lol
I have this case and i came here in this video by accident,and just couldnt stop watching till the end, great craftwork, but you should use always a carbon filter mask while painting.
even is in short times, i paint comercial airplaines and u should think about it.
One Mod i hould like to see someone make,is to replace the acrilic door ,by tempered glass, while still be possible to close with the door knob.
Great Job again,keep up
love it yet again! look amazing
dude you just made it look siick. nice mod dude
I like the small details about this build, like cutting the mesh and placing it over the front light when you could have just left it plain.
If you're going to use LED strip lighting in future builds, I recommend you buy a reel of it instead of individual strips so you don't run out of length. To correct light diffusion, I turn the led strips sideways so that the light shines directly through the edges. Great for edge lighting effects! Hopefully that works for you.
+ImmodderNation Send me a link to the led strips you use via Facebook or something. I've seen some led strips that are 5mm wide which seem great but I can't find them anywhere except from Chinese sellers
You are doing great. Love your work. Subscribed. Keep up good work.
I just learned at least 30 things, thank you sir.
this is freakin sick! great work!
amazing work!
What was the tool you used for etching your design into the acrylic? Awesome mod ❤️
+Jordan Harkness It's a Dremel with an etching tool attachment
Ahh I see. May have to invest in one of those! Haha, thanks man, great work
If you are into modding you should definitely get a Dremel ;)
Hey dude, just watched this video and instantly subscribed, thats amazing what you did to that case. I have the same case but in black. I'd pay for you to do that to the front panel of my case. So sick dude with light strip!
+SliimjimHD Hey thanks man! I'm flattered. It is a nice case
Absolutely amazing what you did to that case man! Off topic but what RGB light strip do you recommend to add some light to your pc? So many options on amazon, not sure what to go with.
+SliimjimHD Anything that you can power with molex or a mobo header. It doesn't really matter what you use unless you want cool software like nzxt cam, in which case you'd get nzxt lights :p
Thanks for the help man! those nzxt lights are dope but no sure if I'm ready to drop 60 bucks for lights😂
Glad to see that mark on your psu shroud. You are human too. I feel better.
+Fluke~ Oh yeah I mess up all the time
Awesome Mod Dude :)
It's like Corsair just gave us an amazing blank canvas with this case. Really cool mod!
Dude you need to start replacing these cases with your own mark! Great job!
How did you make that corsair sticker at 6:22 ?
+Marko Tandara Vinyl cutter, the one I used is in description
Thank you for fast reply. So basically you precisely cut corsair vinyl logo with that Silhouette thing and pasted it on transfer paper and than on your front case cover?
+Marko Tandara Yep! Easy
So beautifull, i love this channel so much ~!
holy crap that did pay off
really cool man!!
Good stuff. I think I read somewhere that painting the led strip with maybe reflective colored paint,you can make the light come out better through the sides,which is where you want it in this case(pun intended). Also was that drill looking thing an engraver?
+Anuranan Rai Deka I'll look into that. And yeah it was an engraver attachment for the Dremel
Dietec Yeah,basically you paint the half through which you don't want light coming out,and of its reflective,it bounces back through the side with no paint.
If we do some engraving and shine an led on it,would the engraving glow?
Vinyl cutter is really handy,going to have to check if a local store offers such a service.
looking good man
How to create the stickers?
Hello. How do yo make these stickers?
Sick video dude
looks perfect 😍
Отличный кейс.Cool case.
What's the material that have been used in the front of the pc ? The material that u painted of white. Is that PVC plates ?
+Leonel Castro Acrylic plates yeah
Dude please give the links to the net kind of thing you used and the songs you have used
+Crafty Tech Search Monstercat on RUclips, and it's just a paper holder thing from Staples.
Thanks dude
Umm sir, how do you connect the led strip in the front ? Where are you connecting those led strip to ? Answer pls
+Primasra GulfiS Drilled holes and route cables to a sata cable
Hey, i already commented on this but I have the same case and I have this spot between the motherboard and right side fans, where the slots for the cables are that just looks plain ugly..
what do you recommend for this? I'm going to be spray painting some of the case so I might just do that too, on that note, why did you only spray paint the left side of the case??
Dietec 2019 videos??!!
Great Mod!!
Razil 1 always great
NICE!
long time no see
Aye, been busy. I'm still modding quite often even when I'm busy though :)
Dietec hope things are going well I love this channel. especially this video since it's my favorite color scheme and theme...
my builds are always futuristic white, blue, and black
It’s cool but since I have Obsessive Compulsive Disorder (OCD) I can’t say I would use this case because the not straight lines.
you should use some Blue PSU extension cables...this would be so perfect with those
+Akito I bet the guy who's PC this is has ordered those already. He better have, they would bring it all together perfectly
Dietec indeed. I wish I could show my PC but my set up isn't done yet so meh...
but imagine the case Riotoro CR280 with all white and a blue stripe where the red line used to be..(the case is originally black and red).. I also modded in a osu cover thanks to ur helpful vids
Any thing about nzxt source 210 with Window ?
What brand of acrylic do you use? I'm interested in getting into modding with acrylic (well modding in general). I know to use the cast stuff but was wondering if there's a better brand than the rest?
+cheapshotted Nope, whatever you can get will work fine :)
Thanks man!
U r insane man.loved ur work.just subscribed ur channel.
Does anybody know if the top panel can be removed on this case? Looks like its just held on with some screws.
just curious what up with your channel at? I liked it before
+Aryan Mayor Art you mean? I like green more than yellow is all.
Dietec could you change the thumbnail theme too? I like green more than yellow too.
+Aryan Mayor oof. It would be a looooot of work changing all those thumbnails
I have dell optiplex 980 desktop not tower can i trasfer all its stuff including motherboard psu and all other stuff in a tower case or in this case CaseCom VS93 Buster Value Series Mid Tower Case
You keep getting better! Nice! BTw whats the first music called?
i liked the smaller logo
also check out deepcools white and blue fans...check them out...they'll make this build stunning
If you put one Cryorig R1 this setup will be more superb! Amazing job, man! Like!
😮 WoW Man no words
Amazing
Brother Ma Hua is the best color to modify on the PC, Is (white and blue) or (red and black)
Is that cpu cooler spray painted?
Yessir!
just to know will a 400ml white spray be enough to paint the upper and the sides of my case and the backplate or i have to buy 2 of them?
Might be cutting it close, especially if you use light coats like you should. Get two.
What cpu
cooler is that?
Cooler Master Hyper 212 Evo, painted white
what do you call those sticker? the one you use for covering the corsair logo
chumbo 21 also interested
its a vinyl sticker he cut out himself using a silhouette vinyl cutter, they're amazing for diy modding like this
ahhhh okie
can't diy that then :(
YEA dont have access to any of these even the acrylic sheet is expensive AF 12X4 inches cost around 6 dollars 😀😀😀
Hi.ditec can You teach us how to modified Old cpu case plz plz make a video
Since when did u change ur channel name?
+Ryan Gait Couple days ago :P
it came out nice, in the beginning i was like omg i hope he has good ventilation with all that dust and spray, lol. but there was one thing i would if done different, the design on the psu shroud I would of put led strips under the shroud and let the design light up. like some kind of see thru follow the same pattern to match the front led, but thats my opinion. but the modification is nice.
+Ssix That's a good idea.
Same case I have but I wouldn't risk doing this to it because I lack the artistic ability to do this lol. Nice work though!
from where do you get money for this does company send you these products??
+GeekyBruce Nah I build them for other people so the other people buy the things, I build them, then I send them out.
This is a common thinking of people that many if the modder get all the products for free which is not true in most cases. Only very famous people get sponsored. Mostly companies look for popularity in a modder than their talents
How do you not have more subscribers?!
Don't like the "curly things" on the front bezel... Gread mod though. I love that mesh.
OMFG LOL!! I just bought a corsair 400c and i see this in my subs!
Good Mod, but I felt like the flower-ish etching design would of came out better with some kind of automated etching machine.
Oh yeah it definitely would have, I'm still learning though. Got a router attachment for the dremel I think would have been better.
Awesome!!
Nice Mod, I would have made a few things different but nice
best mod
paint front panel metal parts edge near lexan blue to help contrast the top lexan pieces
dude i was just saying why did you changed the channel name
+TheSneakyRM I like this better :)
Dietec ok hmmm love you dude can we contact i have got my first modding project next week
+TheSneakyRM I'll be pretty busy over the next few weeks. If you're curious about modding, everything I've done is on my channel
Dietec i am doing everything my pc case is diy j21w
awesome looking case, my only thing to be anal about is the dead spots in the front panel LED
make a video for missing side panels i did put plexi glass with tape but you might have something better !
keep up the great content and fix the links for your instagram etc on older videos !!
I checked a few older video descriptions just now, the links seem to be fine... What videos have broken links?
how to mod your xbox one S!
which has the most views....
how to paint your ram
+Αντωνης Καββαδιας Oh dude thanks! I'll change that today, you saved me
You just made a good case better fair play bro
bro, u fire!
you should have more subscribers
Wow !
Oh, and if you still have that case, could you do me a favour ?
I'm searching for a good case for my new project, and i think the 400c could be it, but i want to mount the GPU vertically, and i don't know if the 4cm GPU fits between the PCI slots and the window. Is there enough space ?
+XX302 Agent der Resistance Hamburg Alas, I don't have it anymore :(
Ok, thx... but awesome build :)
WE NEED CUSTOM WATERCOOLING :D
Name of the song? xD
Gengar Ofisial 100% real no feik :v trash
good video but trash music
Noted
+jigsoree and +Dietec
I would not call it "trash music", but it is not exactly my style. Then again, all music has value and meaning to someone. Keep playing what you like, and what your viewers want to hear.
In my case, if I do not like the music, I turn down/off the volume. I may be old, but I do have that capability. LOL. #PCMasterRace
WOW
Nice ❤️🌹
i cringed when you cutted in the metal but turned out nice
How to follow u on facebook or ins?
+Martin Zhao Check the description