Experience a professional knows how to actually spray paint, did you see the Dimples at the very beginning when it comes to the small portion of the front of the case? that's because there was too much spray paint in the same spot. you don't spray paint like that he doesn't understand how to spray paint. I say it in every single one of his videos but he never looks at it and if he does he does never respond either that or he just doesn't look up how to do it properly. either way it makes his builds look like shit.
Great work! Only suggestion would be to sand the surface before painting and do light multiple coats and this should avoid the orange peel look. And even still after that, where you can do a final wet sand with an 1800+ grit sand paper for an ultra smooth finish.
i got this case and did my first ever built with it n i must say i like the case it keep things near only down fall is i wish it had more room for cable management in the back
Where were you when I was trying to mod my Silverstone TJ07??? I was going for a white and gold theme... Even had a custom waterblock and backplate made for my Galaxy GTX 970 Hall of Fame edition. Got the Avexir sabatico ram, Asus Mark S motherboard, gold compression fittings, 2x clear resoviors with gold tops and bottoms (really brass but they matched my gold fittings). Also got two D5 Pumps with Gold housing... I have plenty of acrylic, even white sheet metal, lots of hard tubing, 2x white radiators with tons of white fans... If possible id like to show you all the goods I have (as all the stuff I purchased I still have in boxes.. 360mm rad, a 420mm rad and both have enough bits power fans for push/pull configurations but I soon realized there wouldn't be enough room in the case.. I've got the dremel 8100 (battery powered) but that dremel table saw looked awesome!!! I know you made this video a long time ago but those over at overclock.net arent very helpful in the ways of helping run your loops. I even sleeved my own Sata cables and bought wire just to make the exact correct length for my psu so I wouldnt have all this extra wires hanging about. If you could give some tips id be glad to send you pictures. I dont even think they make my gold resivor anymore. At least not on the website I purchased mine on. Awesome PC build though... I love how you mapped it out digitally and made it come to life!
I think white LED behind the red would have given you the effect you were after as it would have "lit" up the red acrylic. Since you have a vinyl printer probably would make sense to use to print out your racing stripe like designs instead of cutting the acrylic backing paper out. I think the vinyl almost never gives any painting bleeding while the acrylic backing there is a greater chance of bleeding. But great vid and mods. Mod on
JimmysTheBestCop the reason it keeps bleeding through his because he's using way too much spray paint. you don't shoot spray paint that hard that fast. that's the reason there's dimples all over the front of his PC case... if you would actually learn to spray paint, it would look really good.
Next time try using the Raijintek Leto CPU cooler. The LED looks really good in red, the fans looks properly illuminated. If you are ever doing a red, blue or white build I highly reccommend it for the aesthetics- I've got one and it looks amazing!
18:24 take some isopropyl alcohol and sharpen a matchstick, this will allow you to precisely remove the extra paint. you can use perfume and any sharpened stick as well, just soak the stick in alcohol and wipe away ;)
9:13 not "white balance" but "Exposure" white balance changes the temperature color, where as exposure changes the brightness. exposure can be changed through Aperture, ISO, or Shutter-speed.
For the most important part I was looking for, u just said "local store", which break my heart. (and yes I'm talking about the sleeved extension cable). But overall, great job!
that gray worked out better for the inside behind motherboard, the red lines in the front look a little dull compared to the rest, maybe low intensity lights/LEDs to spice that, the cryorig matches perfectly although I prefer a C7 if I'm not going to overclock, keep it up.
Yes sorry that I forgot to mention in the video. I have a sticker cutter Silhouette model "Portrait". I actually covered this in my previous crazy video if you are interested. Thanks for watching!
Hey, just wondering, why does your paint job look weird? I mean the texture of the stuff that you painted looks weird and doesnt look the same as before?
That's a very good question - this spray paint is called "Hammered" by Rust-Oleum they create this "hammered" effect. Not the usual spray paint colors.
The red bottom part could have been glued to one of the top pieces to keep a closer height. And you messed up the design by having the 'electric wire/vein' on the bottom part only instead of the top as well.
Nice mod with great ideas but maaaan, you have to learn how to paint properly... You put way too much paint by coat. You should do multiples (3 to 5) thin coats (and wait them to dry before puting a new coat) to have a good finish without this orange peel effect. I hope it will help you in the future. Keep the good work!
Why on earth don't you buy a great paint air sprayer just like we model ho railroaders use. Your Rattle can paint spraying skils suck. Use the rattle can for metal chairs for outdoor use.... Up your game man! Still love the mods and the videos...
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
NZXT S340 Elite Mod please be awesome
Bluedream Starcrash YES YES YES
h440
I just finished my S340 Elite mod, Check it out! :D instagram.com/thedutchmanmodifies/?hl=nl
Yeah that case is awesome, if I have a mod idea will definitely do a video on it!
jojococo studio Thank u for the feedback bro 👍
I am not normally a fan of black/red builds. But with the gray accents on the case as well as the fans and cables, this came out awesome. Great work!
Tyler Beck thanks man! And thanks for watching!
Dude you're a beast, i always make my builds super clean but this is on a totally different level.
Great mod, you should still do the led's in the front man.
It would look really good with the fans.
Great, just great! You' ve shown all challenges we face when moding :-)
Great build! And your mods are on point!
Thanks buddy!
Simple yet satisfying mod, keep up the good work.
Your mods are getting better and better
You deserved a new subscriber no doubt. Sick mod. Thinking of doing something like this for my Corsair 400C as well.
This is top 1% of best pc builds on yt, with or without mods!
:D Thanks man
jojococo studio And I have watched between 5-700
You deserve more subs jeez, professional modder!
Experience a professional knows how to actually spray paint, did you see the Dimples at the very beginning when it comes to the small portion of the front of the case? that's because there was too much spray paint in the same spot. you don't spray paint like that he doesn't understand how to spray paint. I say it in every single one of his videos but he never looks at it and if he does he does never respond either that or he just doesn't look up how to do it properly. either way it makes his builds look like shit.
jared you also forgot the tools of the trade... dermal is for children
Okay, so you make it so nice and then place a frickin epic mega cpu cooler so nothing is visible? THIS DESERVES AIO !!!
You my friend, you got some real skills! Keep the good work up!
Nice job on that front panel! very cool mod.
Still one of my fav pc case mod on the internet
Great work! Only suggestion would be to sand the surface before painting and do light multiple coats and this should avoid the orange peel look. And even still after that, where you can do a final wet sand with an 1800+ grit sand paper for an ultra smooth finish.
Really like your videos...you just gained a subscriber today. Keep up the great work : )
Thanks man!
i got this case and did my first ever built with it n i must say i like the case it keep things near only down fall is i wish it had more room for cable management in the back
MORE MODS YEEEEEES
WHOPEEEE!
Where were you when I was trying to mod my Silverstone TJ07??? I was going for a white and gold theme... Even had a custom waterblock and backplate made for my Galaxy GTX 970 Hall of Fame edition. Got the Avexir sabatico ram, Asus Mark S motherboard, gold compression fittings, 2x clear resoviors with gold tops and bottoms (really brass but they matched my gold fittings). Also got two D5 Pumps with Gold housing... I have plenty of acrylic, even white sheet metal, lots of hard tubing, 2x white radiators with tons of white fans... If possible id like to show you all the goods I have (as all the stuff I purchased I still have in boxes.. 360mm rad, a 420mm rad and both have enough bits power fans for push/pull configurations but I soon realized there wouldn't be enough room in the case.. I've got the dremel 8100 (battery powered) but that dremel table saw looked awesome!!! I know you made this video a long time ago but those over at overclock.net arent very helpful in the ways of helping run your loops. I even sleeved my own Sata cables and bought wire just to make the exact correct length for my psu so I wouldnt have all this extra wires hanging about. If you could give some tips id be glad to send you pictures. I dont even think they make my gold resivor anymore. At least not on the website I purchased mine on. Awesome PC build though... I love how you mapped it out digitally and made it come to life!
I think white LED behind the red would have given you the effect you were after as it would have "lit" up the red acrylic.
Since you have a vinyl printer probably would make sense to use to print out your racing stripe like designs instead of cutting the acrylic backing paper out. I think the vinyl almost never gives any painting bleeding while the acrylic backing there is a greater chance of bleeding.
But great vid and mods. Mod on
JimmysTheBestCop the reason it keeps bleeding through his because he's using way too much spray paint. you don't shoot spray paint that hard that fast. that's the reason there's dimples all over the front of his PC case... if you would actually learn to spray paint, it would look really good.
Next time try using the Raijintek Leto CPU cooler. The LED looks really good in red, the fans looks properly illuminated. If you are ever doing a red, blue or white build I highly reccommend it for the aesthetics- I've got one and it looks amazing!
18:24 take some isopropyl alcohol and sharpen a matchstick, this will allow you to precisely remove the extra paint. you can use perfume and any sharpened stick as well, just soak the stick in alcohol and wipe away ;)
9:13 not "white balance" but "Exposure" white balance changes the temperature color, where as exposure changes the brightness. exposure can be changed through Aperture, ISO, or Shutter-speed.
that mod is amazing
The acrylic could be transparent or white and put some rgb strips on it.
anyway IT LOOKS AWESOME
Awesome work! You deserve a medal for that.... Please do more of that!
I got a question: How did you cut the corsair logo so precisely ?
That´s pretty dope.
Amazing, I have the case too. Love it!
For the most important part I was looking for, u just said "local store", which break my heart. (and yes I'm talking about the sleeved extension cable). But overall, great job!
Hopefully in the future I will make videos about sleeved extension cables. Thanks for watching!
I am also getting a 400C case...but don't have the needed skills for the mod....#nooblife....nice work Jojococo studio :)
You should make some distances when spray paint otherwise its become grainy textured paint :D
I'm not a fan of but this looks cool. Loved it.
What is that kind of wood/plastic u use? thanks man appreciate your work
that gray worked out better for the inside behind motherboard, the red lines in the front look a little dull compared to the rest, maybe low intensity lights/LEDs to spice that, the cryorig matches perfectly although I prefer a C7 if I'm not going to overclock, keep it up.
Yeah I was actually thinking about that too the red lines was quite dark. Thanks for watching!
Great video! you should incorporate the leds back in :D, forget reviews more mods! like mouse mods, and and more cutting cases!
Nice build, m curious as to where you get your cable sleeves from ??
very nice mod
Amazing video! Subbed!
It would be cool for you to also add a white LED behind the corsair logo on the PSU cover
That's a good idea!
use automotive painters line tape next time. Your lines will be perfect. Still a great job though. Easy to clean up.
Nice mod i have to say where do you get those small led strip
Thanks for watching - I got these from my local store
Love this! Subbed!
Hi . Nice build. What is thar small red card under GPU?
+Marcel Pajpach it's a wifi card
What blade are you using on your Dremel Moto Saw to cut the plexiglass
nice mod 😍
where or how do you get these logo sticker cut outs? nice case mod man you are beast
Yes sorry that I forgot to mention in the video. I have a sticker cutter Silhouette model "Portrait". I actually covered this in my previous crazy video if you are interested. Thanks for watching!
jojococo studio ok cool sweet. thanks man
Where did you get that Corsair logo that you used in sketchup? i was looking for something like that for my mod but couldnt do.
spraying way to close and coats are way to heavy, other than the paint its a really nice mod
very nice man
can you upload that front panel model somewhere, i really like it and want to do the same thing just need the model of it, thanks
At first glance of the thumbnail I thought it was a production unit and was going to google it. ;-)
just wow!
i notice you paint the psu cover what do you use for just stand spray paint or something else
Where did you buy all the components you used for the mod?
Top fans look like they're set to intake? Don't know if you missed that or it's intentional, just pointing it out. Anyways, cool vids man.
Hey man thanks for pointing that out. Yeah it was intentional - I wanted to see if any major CPU temp differences
what kind of sticker do you use for the spray painting in this case the corsair Logo
Great job m8 ;)
How did you make the stickers tutorial pls
bro can you tell me what software your using on your pc to make the mark up ? !
Where can i get those "clips" holding PSU cables together ?? Or how its called ??
jojococo please, tell me the "glass" that you use. thank's
Hey, just wondering, why does your paint job look weird? I mean the texture of the stuff that you painted looks weird and doesnt look the same as before?
That's a very good question - this spray paint is called "Hammered" by Rust-Oleum they create this "hammered" effect. Not the usual spray paint colors.
Also thanks for watching!
How did you make that corsair sticker at 3:22 ?
Great looking mod, but why stick an aftermarket cooler on a 7500?
looks good
Where you found these cad files for the Sketch Up?
I are searching these to do a mod
Can you tell me the name of the songs? (i really liked them)
Can i know which cryorig cooler that you use?
Does anyone know the name of that kind of line design? Like the red accent lines?
wet sand for a better finish and polish
Hey whay was the card on the bottom of the gtx 1060
what pcie card is that red one over there?
nzxt noctis 450 black and red mod please be awesome
Fantastic
Nice!
Where did you get the modded cables?
What materials did you use?
The red bottom part could have been glued to one of the top pieces to keep a closer height. And you messed up the design by having the 'electric wire/vein' on the bottom part only instead of the top as well.
How'd you get corsair logo like that
nice hand craft！
Can you do one for me if I send it over 😏😅
Just the case ?
💶💶💶💶
may I have a front panel design?
while you were at it, you should have put a 5.25 ODD bay as well. #I_Want_My_ODD_Back #No_PC_without_ODD
Freaking awe
why they (company) not doing like that modding?!
WOOOW
What brand of cables?
oh my gosh you're PC cases a 10-footer, look great from 10 feet away, but when you get up close you'll see how crappy you are at spray painting...
Awesome
awesome
Im in Love with ur work!
It is amazing, pls Build me one xD
If u read this do the Fractal Design Meshify C PLS
U open to modding something for me? Slight front mod
Nice mod with great ideas but maaaan, you have to learn how to paint properly...
You put way too much paint by coat.
You should do multiples (3 to 5) thin coats (and wait them to dry before puting a new coat) to have a good finish without this orange peel effect.
I hope it will help you in the future.
Keep the good work!
you know what i mean man !!
19:25 welcome
Why on earth don't you buy a great paint air sprayer just like we model ho railroaders use. Your Rattle can paint spraying skils suck. Use the rattle can for metal chairs for outdoor use.... Up your game man! Still love the mods and the videos...
Your spraying to much paint at a time, you need to do 2 to 3 thin coats rather than just one thick coat.
You will find the tape wont leak paint then.
can you mod of buggati chiron pc case
what is that program?