It would be useful to know what combination of products from the website achieve this setup. The product that a link is provided for seems to be missing numerous parts like the tap and further interconnects. Could this be added to the description?
The pressure relief valve is rated @ 20 PSI? I've got a carbonation cab that looks very similar that I got off of Amazon and the regulator routinely shows 45 PSI without my relief valve blowing.
I want to use those little co2 cartridges but I don't want to use those regulators. Does anyone know that name of the piece that the cartridges screws into and breaks the seal on the cartridge??
Since I can't seem to find any regular 5L metal water bottle, I wanna get a 5L keg then. I can use it as a portable, everyday use, travel with me everywhere type water container if I'd like to, right? There isn't any different shit on the inside? I'd just screw off the cap and put my mouth there to drink, so without all those pieces and dispensary, brewing stuff, it's just a 5 liter metal container with a solid, stable, screw-on cap to seal?
Depends on how much you use it, if you are using for dispense only it should last the keg full. But if you're using to carbonate it will take more than one to do that.
Great product. Very handy. Question. Can the pressure cylinder and gauge be disconnect then connected to another keg without venting the current mini cylinder?
Yes easily using a PINT365 www.themaltmiller.co.uk/product-category/equipment/dispense/handpulls-beer-engines/ they will be back in stock next week. Not so easy using a conventional hand pull but it is doable
Hi need little help here, i have 5 liter keg, i put in coffee 1.7 liter and the foam doesn't comes out, what should i do? Does it need more than one nitro charger? Because i only use one nitro charger
Check everything is fully sealed and there are no leaks. If its ok then I would suspect that its needing more gas, especially seeing as the coffee isn't going to be carbonated like beer is.
@@themaltmiller8438 yeah i found the problem, it's need more nitro gas. I was charged it with 2 capsule and finally i got what I want. Just like beer. But is it ok to insert 2 capsule into 5 L keg? It's not gonna blow up or leak?
Brilliant, I've been brewing just under a year with basic plastic pb and was wondering about this set up, can you condition your beer into this from the fv and then serve it when ready?
You could get a bar or pub to fill it and then use this to keep it fresh and dispense it under pressure at home, but it is designed for home brewers to get the most out of it
how about making a guide of making Nitro coffee using this product {nitrogen is needed} CO2 reacts to the coffee making it EXTREMELY bitter if the base liquid has some bitterness in it.
Enjoying these videos rob, looks like a nice bit of kit, I sense any order coming up....
It would be useful to know what combination of products from the website achieve this setup. The product that a link is provided for seems to be missing numerous parts like the tap and further interconnects. Could this be added to the description?
Great looking keg.
Cheers
The pressure relief valve is rated @ 20 PSI? I've got a carbonation cab that looks very similar that I got off of Amazon and the regulator routinely shows 45 PSI without my relief valve blowing.
I’m interested in buying one of these for a upcoming garden party. Do I have to brew my own beer and fill it? I’m looking for something easy and lazy.
I want to use those little co2 cartridges but I don't want to use those regulators. Does anyone know that name of the piece that the cartridges screws into and breaks the seal on the cartridge??
Great info, thank you!
Since I can't seem to find any regular 5L metal water bottle, I wanna get a 5L keg then. I can use it as a portable, everyday use, travel with me everywhere type water container if I'd like to, right? There isn't any different shit on the inside? I'd just screw off the cap and put my mouth there to drink, so without all those pieces and dispensary, brewing stuff, it's just a 5 liter metal container with a solid, stable, screw-on cap to seal?
Great info,
how long does one of those capsules last?
Depends on how much you use it, if you are using for dispense only it should last the keg full. But if you're using to carbonate it will take more than one to do that.
Great product. Very handy. Question. Can the pressure cylinder and gauge be disconnect then connected to another keg without venting the current mini cylinder?
Hi, Yep indeed it can
Could this be connected to a hand pull?
Yes easily using a PINT365 www.themaltmiller.co.uk/product-category/equipment/dispense/handpulls-beer-engines/ they will be back in stock next week. Not so easy using a conventional hand pull but it is doable
Can one 16 CO2 charge carbonate 5L at 20psi?
We have only used the small bulbs for dispense not to carbonate. I would guess at three to four bulbs to achieve that.
@@themaltmiller8438 Gotcha. Thanks for the reply!
force carbonate ? how long do you have to keep beer in there for it to be carbonated ?
Hi need little help here, i have 5 liter keg, i put in coffee 1.7 liter and the foam doesn't comes out, what should i do? Does it need more than one nitro charger? Because i only use one nitro charger
Check everything is fully sealed and there are no leaks. If its ok then I would suspect that its needing more gas, especially seeing as the coffee isn't going to be carbonated like beer is.
@@themaltmiller8438 yeah i found the problem, it's need more nitro gas. I was charged it with 2 capsule and finally i got what I want. Just like beer. But is it ok to insert 2 capsule into 5 L keg? It's not gonna blow up or leak?
tuswanto adji saputro our kegs have a pressure release valve to prevent you over filling 😉
@@themaltmiller8438 so it is ok to put in 2 nitro charge?
I went to your site and it says insufficient stock.
When will this be rectified?
thank you.
See here www.themaltmiller.co.uk/product/complete-19l-keg-setup/
How much pressure do you set it too?
What is the height of the keg with the dispense lid on?
you gonna at least pour a beer with it pal
Hi , its possible to carbonate with this keg ? Thanks for your help
Hi, Yes, very easily
Cleaning, how to do?
The same as any other keg, cleaner, rinse, sanitise
Brilliant, I've been brewing just under a year with basic plastic pb and was wondering about this set up, can you condition your beer into this from the fv and then serve it when ready?
You can yeah. Couple days under pressure and ready to drink.
Interesting
Is this only practical if you brew your own beer ?
You could get a bar or pub to fill it and then use this to keep it fresh and dispense it under pressure at home, but it is designed for home brewers to get the most out of it
how about making a guide of making Nitro coffee using this product {nitrogen is needed} CO2 reacts to the coffee making it EXTREMELY bitter if the base liquid has some bitterness in it.
Immense