Brembo Swap your A-Body on a BUDGET!!
HTML-код
- Опубликовано: 23 авг 2024
- This should work on any 70-72 A-Body, and be similar for most 60s-70s GM cars!
.
Drum Hubs - www.summitraci...
.
Wheel Studs - www.summitraci...
.
Calipers and Pads are off of a 2010-2015 Camaro SS
.
Brackets
Front - bigbrakeupgrad...
Rear - bigbrakeupgrad...
.
Rotors (From Orielly's)
Front - 580756RGS
Rear - 580712RGS
.
Caliper Lines - a.co/d/4pORv2z
.
Master Cylinder - 260-9439-BK
.
Front Brake Line Tee - a.co/d/8azasJa
.
Proportioning Valve - a.co/d/c2rqw3J
.
Please let me know if I missed anything, or you need any further information!
Btw, grand national brake lines would work on all 4 corners. Thats what i did on mines.
Lots of great info and its was free. Some ppl be trying ti charge charge.
Gotta share the knowledge!
Awesome job brother, I’m putting wilwood all around on my 76 C10 and was thinking about doing Brembo but there isn’t enough aftermarket or information about it yet so I’m pissed I didn’t come across this sooner but definitely keep the content coming. I haven’t searched the channel yet but I’m hoping you have more on this build especially the motor. Super charger here I come!
I dont yet, but plan to do alot more videos! And can definetely go through the setup and try to help!
Fyi, you could’ve ordered Corvette rotors. I used 2017 Z51 Stingray front rotors from ebay.
I believe there’s a lot of late model GM calipers that would work! I just didn’t know enough to say for sure
Looks great! Love to head how you feel the 7/8 master performs!
Have a bunch of these parts I planned to do sometime in the near future. Thanks for the video.
So far I have zero complaints! She stops great but definitely a learning curve with manual brakes!
Let me know how your swap goes!
@@GhostWS6 can you share you opinion about pedal effort and travel?
It has around a half inch of travel and feels firm after, I wouldn’t recommend it for track driving, but for daily driving I dont see ANY issues!
Are the brembo calipers from a 2010-2015 ss camaro the same as the calipers you just installed. Everyone's using Corvette calipers. But for me,it is way easier and less expensive to use Camaro brembo calipers. Plus they are 13 in all around also.Thanks for the help.
So the 2010-2015 Camaro SS and the 04-07 CTS-V calipers are the same as the ones I installed. Just an FYI, they use a 14” front, and 13.6” rear.
Also, I have another video on how to install 6 pistons calipers (same brackets) but did it on my 69 Camaro. The video is on my channel!
Let me know if you have any other questions!
Did you go from disc to disc ? Or drums to discs?
I went disc to disc, but needed drum hubs in the front
Awesome.job.. but you ne fuckn shit up😂 but overall you get the job done
It shows your human not like these other guys
Trust, there’s definitely a “right way” and I rarely take that road😂