This looks like a homemade lathe mill combo CNC machine. If this is the case it’s amazing. I would be very interested in learning more about it, design, construction etc. thank you for sharing
Yes, this little „machining center“ is a self-made construction. I'm thinking about maybe introducing it. But I am not sure if there is interest here. Thanks for the very first comment on my channel 🙂
@@9voltprojects you should really consider sharing your project, as your channel grows you will gain more interest. I have a Facebook group that I started 10 years ago and it took all that time to reach 70k plus members, but it continues to grow as the interest grows
Very impressive machine. Even a tool post grinder. I don't see any scribe lines to setup the 8 degree taper of the ER collet socket. On what is the compound axis. Curious how that is performed.
To set the angle accurately, I first clamp a dial test indicator in my main spindle. I then use this to measure an Y(offset) by probing directly on the ball guideway of the guide rail of my 'mobile tool axis', according to the angle equation. Y(offset)= tan(4°) * X(probing distance X1,X2). Unfortunately, this is not very practical but I achieve quite accurate angles with it. Thank you for joining my little channel.
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
This looks like a homemade lathe mill combo CNC machine. If this is the case it’s amazing. I would be very interested in learning more about it, design, construction etc. thank you for sharing
Yes, this little „machining center“ is a self-made construction. I'm thinking about maybe introducing it. But I am not sure if there is interest here. Thanks for the very first comment on my channel 🙂
@@9voltprojects I would also be interested in more information about your machining centre. Subscribed.
@@9voltprojects you should really consider sharing your project, as your channel grows you will gain more interest. I have a Facebook group that I started 10 years ago and it took all that time to reach 70k plus members, but it continues to grow as the interest grows
Excellent result, well done.
Thank you a lot!
Very impressive machine. Even a tool post grinder. I don't see any scribe lines to setup the 8 degree taper of the ER collet socket. On what is the compound axis. Curious how that is performed.
To set the angle accurately, I first clamp a dial test indicator in my main spindle. I then use this to measure an Y(offset) by probing directly on the ball guideway of the guide rail of my 'mobile tool axis', according to the angle equation. Y(offset)= tan(4°) * X(probing distance X1,X2). Unfortunately, this is not very practical but I achieve quite accurate angles with it.
Thank you for joining my little channel.