Fred is getting brave. Living in the people's republic of California and telling the rest of America how to circumvent the epa. Be careful or the commissar will get you😂
The original Jeep Gladiator came out in 1962... about 10 years before this jeep was made. the new one is named after the old SJ. I had a 1977 j10 with an amc 401.
Put a small bed crane crane on back use it for hauling engines and axles. Or turn into off road wrecker. It's way cool I am sure with your creativity you can make it way cooler!! Thanks for sharing your talents and adventures!!
The gas cans I bought in '19 or '20 have plastic colanders in the fill hole and it legitimately takes me 5 to 10 minutes to fill each can because the backflow of fuel kicks the pump off. I've got too much stuff to do to be stuck at a gas station waiting for my cans to fill. The older gas cans from my younger days had warning labels on them that said what you should and shouldn't do. All the "Safety Features" on the newer style cans aren't letting Darwin have his day and are making life difficult for common sense people who need to get things done. Thank you for coming to my Ted Talk. 😂
7:08 Most NOCO Booster packs have a "Manual Override" button to force 12 volts at the clamp leads if it doesn't detect a battery. Press and hold the button for 3 seconds until the battery level LEDs start to "chase".
I think the long-jeep needs to become a Fred-made trail-camper. Maybe the guys at four wheel camper up in Woodland can demystify the manufacturing process. Could be a great series of episodes
I don't think that thing is ugly, but "personally" I do think it's too long to be practical. I always need my Jeeps or trucks to be useful enough to be utilized. At this length it'd be perfect for a parade cruiser. I understand it's not wide (maybe that's why they went long) but I'd death wheel out around a foot to 2. Hey man I'm not you 😁 I'm not telling you what to do. Enjoy that thing! Edit: I love those art cars. That Toyota is a freakazoid. 🤖
As for a cheap jump pack… I have not yet tried this, but apparently you can jump start about any gasoline engine with a drill or impact 18v battery. A couple lengths of rigid wire smashed a bit will slide into the + and - terminals of the battery and give a bit of it’s magic to a dead battery!
That's a good-looking flatbed jeep. I haven't seen you since they canceled ded, I'm glad to have stumbled across you tonight. Keep up the great work, man, and as always, thank you for the wonderful content.
this could be a sweet looking truck .. Id say keep the wheelbase .. Bob the back for better departure angle . then ditch the backseat, move the cage forward and extend the bed all the way to behind the fronts, and build bed sides to the height of the base of the windshield
I think it is awesome. Put a Fantasy Island safari top on it for a little sun/rain reprieve, some fishing rod holders, some cooler tie-downs and it is a perfect surf fishing Jeep-Truck-Thing.
I love that Jeep truck thing!! I love those tires. I have the same set 35x12.50-15. Mounted on my JK, yes 15s will fit a JK. Mine mounted measured at 36 1/8x14 3/4x15. I hate Mickey Thompson killed off DC.
Hahaha love the bit about the gas can, being old school myself ...when I have to read directions and have an engineering degree and find my reading glasses to use my gas can its a sad world!
Just got a new wood chipper a week ago and was looking for gas for it and naturally all our gas cans with the good nozzles on them are empty. So I used this gas can where the nozzle literally makes the gas spew in a 360 degree fountain completely missing the gas filler hole and soaking the whole damn wood chipper!
Love watching your videos Fred, the troubleshooting and steps you take to get something running are just like a normal dude... not some crazy car show.
I thought the reason for the gas can contraptions was to better capture gas fumes. There was some research showing that more pollution is caused by spilled gas than by driving a highly efficient car. So preventing spilled drops is the point of those contraptions.
100K subscriber giveaway?… Dirt Cheap overland camper thing? A series on Apocalypse survival with an EMP hardened ignition, fuel recovery vacuum pump, on the fly carb and timing adjustability to be able to run on whatever fuel is available? … a diesel swap? … Hard to say… Thanks Phredo. Love your stuff..
Of all the awesome stuff you have built or tinkered with , for some reason this is the one that I think about trying to fix. Restore the front half so it runs great and the body mounts don't fall off. Rebuild the back half with a shorter and lighter bed. Like the one on the Samurai or the new Bronco you built that DHDave guy.
The push button type gas can nozzle is very good, I've used them since they came in the market, They don't spill and self vent as you pour, release the button to shut off without tipping the can back upright. But metal cans are best for safety
Don't get me started on gas cans, but thanks for the tip on the replacement nozzles. As far as the Jeep, it looks to be about the same size as a current Comanche. Depending on the rust, is it worth building into some kind of overlander? Maybe a support vehicle on an expedition, get the build sponsored. If the frame is rusted away, either part it out, or swap the frame. Lots of ways to get content from this frankenbuild!
There is a button on that jump starter if you press and hold it it will over ride the safety. And allow you to jump a vehicle with a dead battery or no battery at all. Love my noco jump box super handy tool.
Dear Sir Fred of 4x4 Land, I've taken notice your choice to read comments which isn't always the healthiest idea for someone in your shoes. In my experience people individually are awesome, creative and amazing. As a collective are the dumbest a$$ sniffin mammals on the planet and not very kind, tribal, and selfish. Watching your gas segment and hearing your safety police reference I wanted to let you know that you sir are an awesome individual who has bestowed much knowledge and a decade plus of fun among many people. And brought fathers and sons together in a time where that is getting more rare. I figure you read comments to stay connected with your audience and I respect that immensely, though not sure its the best for you. Just know if you continue and see some of color and assholish remarks that they're prob not true fans or just started growing hair and haven't taken enough correct me lumps yet. There 10,000 hrs and then there's 10,000 lumps, both bring knowledge and wisdom. Anywho your real fans have much love and respect for Sir Fred of 4x4 Land and wish you nothing but good tidings, muddy holes, steep off camber rocky trails and starry night camping. Thank you for all you do and if you see negativity in your comments just skip em and move on. You've got a lot of admiration out here and fans like that are worth 100 of the negs. Till we convers again Sir!
Don't forget to pull the battery. Yeah I have a few forgotten for years. Wasn't to terrible back when they were much cheaper. Those gas cans are a bane to the people that use them. I even had to rework a jerry can to remove the vent by the nozzle and put a regular in the back. For most things I use a Safety Can. More expensive but no hassle and heavy duty steel.
Man it was this past Saturday! I would have totally blasted down the central coast. I was going to go out to Selma, but I wasn't feeling it. This week is Pleasanton. Next week maybe hit Pismo. Week after that hopefully start a new job.
Next episode: Fred dies from Hanta virus When Noco doesn't detect battery hold "Boost" button till it powers up. I think you should put a boom on the Jeep truck thing and make a Tow Jeep Truck thing out of it. 😁
thr safety can with the fire extinguisher style handle is sctually really good that goofy retracto handle can sucks cause it slows the process down severely
@4xFredWilliams, it cool the way it is, i wouldnt chop it up if i had the money fred i would buy off you and jus give a nice paint job replace the seats and use it daily, but it not mine and i dont have the money but enjoy it fred, from Creswell Oregon saying thanx for the video, jon
Lol, I did not know about the fix for the gas cans. Been using the idiotic safety cans for years, swearing and pouring gas down my pant legs. No more! As far as the Jeep, build a custom frame and cut the wheelbase back down, make a custom off road support style service bed for it and make a CJ 8 "ish" coffee delivery wagon for the Rubicon.
Thanks for calling out the crappy gas can designs. You can also buy the “water” version of the Rotopax if you need the overlander cred. I think there is/was an EPA bologna reason for the non-venting cans also…
Yea those safety nozzles make me spill more gas than I would with the old school ones
Gas leaks from the tubes sliding inside each other. I have manually release the safety clip. Gas goes everywhere including my hands
I have one that works perfectly for filling up my mower, rarely ever spill a drop. Sounds like user error to me... 😁
@@AndrewAMartin - Wow! You get a 🍪!
Everyone I have had so far the mechanism jams up, breaks or the springs do weird things which all lead to me taking it off and using a funnel.
I just ripped one apart and made a cork stopper for it. They made the dumbest fuel nozzle design ever.
I always watch for older style gas cans at yard sales for that exact reason
Hahahah, I thought I was the only person that did that!!
If you live in America, you can find these, if you live in a city, probably not 😂 perfect.
lol
The jeep truck is good just like it is. It’s definitely unique. My first jeep in the early 80’s was a 1974 CJ5 with the 304 engine. It was a fun jeep.
I love that thing!
Its so ugly its good!
Fred is getting brave. Living in the people's republic of California and telling the rest of America how to circumvent the epa. Be careful or the commissar will get you😂
As a Californian, it's the reason to own pre-72 vintage...
OMGNNEV NAZIS WILL TARGET. YOUR ICE VEHICLE AND TIPS
This truck thing is a perfect representation of what adhd feels like
YAAAAAAA!!!!! Thanks for the gas spout heads up. I’m headed to the jungle now!!
Fred channels his inner peg, puttin it right in the ketchup first thing!
Fred had a Gladiator before Jeep did! I’d love to see this beast fixed up, rebuilt, put back together. I think it’s great!
Love the junk! Hello from detail dan!
high detail dan!
Hope all is well come wheel colorado!
The original Jeep Gladiator came out in 1962... about 10 years before this jeep was made. the new one is named after the old SJ. I had a 1977 j10 with an amc 401.
Those turbine wheels are probably worth more than the Jeep truck thing.
lol .. i think you're correct
Was gonna say, you can probably hear heavy breathing from the duke boys 😂
Put a small bed crane crane on back use it for hauling engines and axles. Or turn into off road wrecker. It's way cool I am sure with your creativity you can make it way cooler!!
Thanks for sharing your talents and adventures!!
Love this video I have a Jeep and It's all I drive everywhere.👍👍
You might need some guard cats to keep the mice off your priceless jeeps.
You just end up with cat piss on everything
Cats like to walk all over soft tops and sharpen their claws. The most destructive pet known to man.
@@christopherwedemeyer2993
I didn't have a problem with that, unless you have 2 unfixed tomcats around.
We had fun at The truck show. Definitely worth the 2 hour drive. We had to watch the dirt every episode when you and David got the long jeep again.
You have a 'rithmetic motor. It's putting down 6 and carrying 2....😁
Hahaha would that make it a 228 V6, do the two dead ones cancel out and make it a 152 V4, or is it a 304 V6? See how many ways we can math in 2024? 😂
Had to thumbs up, you made my wife laugh from the other room. She heard the caught on fire a couple times part.
The gas cans I bought in '19 or '20 have plastic colanders in the fill hole and it legitimately takes me 5 to 10 minutes to fill each can because the backflow of fuel kicks the pump off. I've got too much stuff to do to be stuck at a gas station waiting for my cans to fill. The older gas cans from my younger days had warning labels on them that said what you should and shouldn't do. All the "Safety Features" on the newer style cans aren't letting Darwin have his day and are making life difficult for common sense people who need to get things done. Thank you for coming to my Ted Talk. 😂
7:08 Most NOCO Booster packs have a "Manual Override" button to force 12 volts at the clamp leads if it doesn't detect a battery. Press and hold the button for 3 seconds until the battery level LEDs start to "chase".
Also, the NOCO times out after 60 seconds, and you have to press the on/off button again to reset it.
I think the long-jeep needs to become a Fred-made trail-camper. Maybe the guys at four wheel camper up in Woodland can demystify the manufacturing process. Could be a great series of episodes
Find a donor CJ5 for the door openings and make this into a a proper crewcab! A full roll cage and bench seat in back. 😎
I don't think that thing is ugly, but "personally" I do think it's too long to be practical. I always need my Jeeps or trucks to be useful enough to be utilized. At this length it'd be perfect for a parade cruiser. I understand it's not wide (maybe that's why they went long) but I'd death wheel out around a foot to 2.
Hey man I'm not you 😁 I'm not telling you what to do. Enjoy that thing!
Edit: I love those art cars. That Toyota is a freakazoid. 🤖
I totally love this jeep , long wheel base looks great
Sure can makes a great can with really nice features. No cap removing to fill can nice controlled pours, give them a chance.
Wait what? The Gas can kit from the jungle website? I didn't know. Nice!!
Cool to see the one ton yj / junkyard YJ again.
I’d cut the wheelbase and make it how ya want but definitely keep it! It’s a piece of DED history! 😂🤘🇨🇦
Ugly truck show. I love it
You can never have too many jeeps keep it.
It’s pretty ugly. I LOVE IT!
As for a cheap jump pack… I have not yet tried this, but apparently you can jump start about any gasoline engine with a drill or impact 18v battery. A couple lengths of rigid wire smashed a bit will slide into the + and - terminals of the battery and give a bit of it’s magic to a dead battery!
Good to see you again. You have the perfect demeanor/personality for this type of channel. Keep it up. Thanks!
That's a good-looking flatbed jeep. I haven't seen you since they canceled ded, I'm glad to have stumbled across you tonight. Keep up the great work, man, and as always, thank you for the wonderful content.
I would move the rear axle forward a bit, and bob the bed behind it a bit....but I like it.
this could be a sweet looking truck .. Id say keep the wheelbase .. Bob the back for better departure angle . then ditch the backseat, move the cage forward and extend the bed all the way to behind the fronts, and build bed sides to the height of the base of the windshield
I think it is awesome. Put a Fantasy Island safari top on it for a little sun/rain reprieve, some fishing rod holders, some cooler tie-downs and it is a perfect surf fishing Jeep-Truck-Thing.
Needs tattoo. Da plane. Da plane!!!
Gas pump powered by aa batteries…game changer.
I love that Jeep truck thing!! I love those tires. I have the same set 35x12.50-15. Mounted on my JK, yes 15s will fit a JK. Mine mounted measured at 36 1/8x14 3/4x15. I hate Mickey Thompson killed off DC.
You can force your Noco jump pack into a bypass mode, it will jump you from 100% dead. Usually it's the ! Button and the power button for 5 sec.
It would be sweet with the cJ body chopped down and like a six foot bed like the DED samurai build.
Glad your sticking to the jeep theme and unusual stuff. Hoping to see more of the jeep collection
Oh man that Mercedes in back brings up so many memories, miss that car. Love all of your projects and vehicles man!
Fuel Filter,Wash out carb. with soap and water,insp. R&R. And (Have a Great Day)!
I like funnels with a fine mesh built in screen, incase dirt gets in the gas can. I can't find them anywhere.
Hahaha love the bit about the gas can, being old school myself ...when I have to read directions and have an engineering degree and find my reading glasses to use my gas can its a sad world!
You should definitely shorten the wheelbase somewhere between current and factory, add a better rollbar/hoop for safety and go wheel it!
Just got a new wood chipper a week ago and was looking for gas for it and naturally all our gas cans with the good nozzles on them are empty. So I used this gas can where the nozzle literally makes the gas spew in a 360 degree fountain completely missing the gas filler hole and soaking the whole damn wood chipper!
I'm a former California resident and I was led to believe you had to give the mice a 30 day eviction notice in the state , eh ?
💯 on the gas can "rebuild" kit!
Who has more fun than you? Keep up the great work!!!
Nothing beats the sound of an AMC V8
...beautiful. Jeeeep.......
Cut it up, change it up and build it!
I loved seeing that Edsel.
Nice patina call it a CJ 10.5
Thanks Fred,it makes mine look ok.ha ha.
Thumbs up.
Love watching your videos Fred, the troubleshooting and steps you take to get something running are just like a normal dude... not some crazy car show.
Thanks 👍
I love this Jeruck so much.
that chassis flex as it came to a stop at the end
I thought the reason for the gas can contraptions was to better capture gas fumes. There was some research showing that more pollution is caused by spilled gas than by driving a highly efficient car. So preventing spilled drops is the point of those contraptions.
Another ridiculous idea someone had that should have never happened. But I also love it!
100K subscriber giveaway?… Dirt Cheap overland camper thing? A series on Apocalypse survival with an EMP hardened ignition, fuel recovery vacuum pump, on the fly carb and timing adjustability to be able to run on whatever fuel is available? … a diesel swap? … Hard to say… Thanks Phredo. Love your stuff..
I like them Turbines
That thing is hideous. Terrible. An abomination of a travesty. I love it.
Of all the awesome stuff you have built or tinkered with , for some reason this is the one that I think about trying to fix. Restore the front half so it runs great and the body mounts don't fall off. Rebuild the back half with a shorter and lighter bed. Like the one on the Samurai or the new Bronco you built that DHDave guy.
Truly a blue ribbon ugly truck.
The push button type gas can nozzle is very good, I've used them since they came in the market,
They don't spill and self vent as you pour, release the button to shut off without tipping the can back upright. But metal cans are best for safety
She is beautiful in my eyes.
My man!! Here for another one!
❤ ugly Jeep truck thing rocks!
I remember seeing you. Guys pass us in Uintah when you bought it.
If you decide to sell it reach out to me.
Don't get me started on gas cans, but thanks for the tip on the replacement nozzles.
As far as the Jeep, it looks to be about the same size as a current Comanche. Depending on the rust, is it worth building into some kind of overlander? Maybe a support vehicle on an expedition, get the build sponsored.
If the frame is rusted away, either part it out, or swap the frame. Lots of ways to get content from this frankenbuild!
That truck has so much potential, it always gives me so many ideas. I would shorten it a little bit and add a bikini top.
There is a button on that jump starter if you press and hold it it will over ride the safety. And allow you to jump a vehicle with a dead battery or no battery at all. Love my noco jump box super handy tool.
Like the old school mag wheels,we used to call them fan rims lol
Dear Sir Fred of 4x4 Land,
I've taken notice your choice to read comments which isn't always the healthiest idea for someone in your shoes. In my experience people individually are awesome, creative and amazing. As a collective are the dumbest a$$ sniffin mammals on the planet and not very kind, tribal, and selfish. Watching your gas segment and hearing your safety police reference I wanted to let you know that you sir are an awesome individual who has bestowed much knowledge and a decade plus of fun among many people. And brought fathers and sons together in a time where that is getting more rare. I figure you read comments to stay connected with your audience and I respect that immensely, though not sure its the best for you. Just know if you continue and see some of color and assholish remarks that they're prob not true fans or just started growing hair and haven't taken enough correct me lumps yet. There 10,000 hrs and then there's 10,000 lumps, both bring knowledge and wisdom. Anywho your real fans have much love and respect for Sir Fred of 4x4 Land and wish you nothing but good tidings, muddy holes, steep off camber rocky trails and starry night camping. Thank you for all you do and if you see negativity in your comments just skip em and move on. You've got a lot of admiration out here and fans like that are worth 100 of the negs. Till we convers again Sir!
Looks better than the new jeep truck thing. A lot of ugly out there but go getcha some anyway, then work your way up to something like this. baller.
Don't forget to pull the battery. Yeah I have a few forgotten for years. Wasn't to terrible back when they were much cheaper. Those gas cans are a bane to the people that use them. I even had to rework a jerry can to remove the vent by the nozzle and put a regular in the back. For most things I use a Safety Can. More expensive but no hassle and heavy duty steel.
Poor little CJ-5, being small and nimble was about all they have going for them.
Man it was this past Saturday! I would have totally blasted down the central coast. I was going to go out to Selma, but I wasn't feeling it.
This week is Pleasanton. Next week maybe hit Pismo. Week after that hopefully start a new job.
Next episode: Fred dies from Hanta virus
When Noco doesn't detect battery hold "Boost" button till it powers up.
I think you should put a boom on the Jeep truck thing and make a Tow Jeep Truck thing out of it. 😁
Nice burnout! Lol
Tune it up. Drive it.
Definitely fix the exhaust leak!
thr safety can with the fire extinguisher style handle is sctually really good that goofy retracto handle can sucks cause it slows the process down severely
@4xFredWilliams, it cool the way it is, i wouldnt chop it up if i had the money fred i would buy off you and jus give a nice paint job replace the seats and use it daily, but it not mine and i dont have the money but enjoy it fred, from Creswell Oregon saying thanx for the video, jon
Disconnect that Battery...
Tune up...getting running better..
I actually liked the idea of this truck. I think it needs a flatbed instead of that welding bed looking thing.
Lol, I did not know about the fix for the gas cans. Been using the idiotic safety cans for years, swearing and pouring gas down my pant legs. No more! As far as the Jeep, build a custom frame and cut the wheelbase back down, make a custom off road support style service bed for it and make a CJ 8 "ish" coffee delivery wagon for the Rubicon.
The OG JT
commenting right at the start of video .... hope the car show isn't far from Fred's house .. lol
made it there & back , didn't die .. guess that counts as a win .. and some nice vehicles
Push and hold the button on the jump pack and it forces it on regardless if what you're jumping is 100% dead or not
Thanks for calling out the crappy gas can designs. You can also buy the “water” version of the Rotopax if you need the overlander cred. I think there is/was an EPA bologna reason for the non-venting cans also…
The Jeep Gladeteriorated
Annndd…when your son puts diesel in a red gas can he should label it as DIESEL!
Still think you turn it back to a regular jeep and take it and lemon pie to the Rubicon. Straight 6 vs V8.
I saw the documentary. A guy in Myanmar makes those jeep trucks
It looks like a Golf cart with the flatbed lol
Make it into a motorhome hahaha
So great. Keep it as is, or sell it? seems like a lot of work to do any major mods to it.
You can't go wrong with a Jeep