I bought an ACL oil pump for my b 16 turbo drove it for a few months and it exploded ,the gear ⚙️ cracked in half ,locked the crank basically destroyed my engine , pistons sleeves, rods all trash, 4 pistons do a ported oil pump from genuine Honda costs more but better than rebuilding your engine
Just installed this on my d16y8 (99-00) the oil pick up does not fit the holes are spaced further apart and was wondering if anyone has insight to this.
Hi guys i have problem with my car not supplying oil i bought new pump first time after installing new oil pump it was supplying for less that 30 minuets bt now it doesnt wat couse the problem
@@jakobrickan8435 LMFAO yeah shim an OEM with smaller weaker gears overwork and prematurely wear the f#ck out of it instead of using a reinforced bigger geared higher output specifically designed to be better out of the box performance oil pump have you ever physically taken apart an OEM and ACL pump and compared the 2 or have 1 on a built motor with an accurate oil pressure gauge that shows how the ACL has 100 psi at start up after 1000's of miles of abuse on a boosted engine or are you just talking out your @ss my guess is your name is Mr butthole breath LMFAO
@@jakobrickan8435why OEM? I just replaced mine with an OEM spec one, it wasn’t “high performance” or anything but it seemed of good quality so should I have left the OEM one on the motor? It has 200,000 miles so I wanted to do preventative maintenance before swapping it into a car
@@Dylan-yn2do If you read what I said all OBDO and OBD1 D15 and D16 oil pumps are interchangeable ie the same and only the OBD2 D16Y weather the D16Y8 or the D16Y7 oil pumps have the provision for the oil dipstick which is the only difference now if you don't understand that I can't help you
Stop lying,you bought the pump..... there's no way that got send out without a return address as a matter a fact the post office wont accept anything without a return address
at first i didn think much of this channel but you have grinded it out since jeremy left it to you . keep hustling you earned a sub today
Put it in the damn car
This build dragin on forever.
We wanna see her make some sauce
I wish they made these for the Y8
FINISHHHH THIISSS BUILDDDDDD
I love high preformance parts
D16💪😎
Opinions on using a d15b block with z6 head turbo build?
I bought an ACL oil pump for my b 16 turbo drove it for a few months and it exploded ,the gear ⚙️ cracked in half ,locked the crank basically destroyed my engine , pistons sleeves, rods all trash, 4 pistons do a ported oil pump from genuine Honda costs more but better than rebuilding your engine
Toda make parts for type r oil pump
What do you do about the crank position sensor?
Should be applying gasket maker on the inside of the bolt holes and not the outside like you have done
yes I was thinking the same. I worked for a local Honda dealer for 15 years and factory is on the inside. It may leak from the bolts otherwise
Just installed this on my d16y8 (99-00) the oil pick up does not fit the holes are spaced further apart and was wondering if anyone has insight to this.
What did you end up doing??
@@ryan_widdoes ordering a Mellings y8 pump☹️
Great build. I got this pump for my motor and the stock pickup tube wasn’t fitting for me. What did you end up doing for yours?
You have a d16z6?
@@Heart_And_Sol had now unfortunately
@@georgecartwrightii9439what happened man? I am about to go Vitara boosted ? 😢❤
@@sebastianlada9102the stock pick up tube wasn’t fitting properly to had to try n find another that would
Cheap eBay injectors constantly leak that's why your idle is bad. We an engine hydrolock on us because of it before.
where do you put the dipstick after putting on this oil pump? i’m rebuilding one right know confused help would be very appreciated!
If the block is a Z6 The dipstick will be in the middle of the block if you use y8 you have to use a y8 oil pump or you will have no stick
That sucks!
Hi guys i have problem with my car not supplying oil i bought new pump first time after installing new oil pump it was supplying for less that 30 minuets bt now it doesnt wat couse the problem
Whats the part number on the acl pump
WoW. We thought you had the KUNG FLU. You still like Hondas. Vote4TRUMP😶
Strongly reccomend you go with a different oil pump
Which would you recommend? OEM only?
@@fftouge826 yes
@@jakobrickan8435 LMFAO yeah shim an OEM with smaller weaker gears overwork and prematurely wear the f#ck out of it instead of using a reinforced bigger geared higher output specifically designed to be better out of the box performance oil pump have you ever physically taken apart an OEM and ACL pump and compared the 2 or have 1 on a built motor with an accurate oil pressure gauge that shows how the ACL has 100 psi at start up after 1000's of miles of abuse on a boosted engine or are you just talking out your @ss my guess is your name is
Mr butthole breath LMFAO
@@jakobrickan8435why OEM? I just replaced mine with an OEM spec one, it wasn’t “high performance” or anything but it seemed of good quality so should I have left the OEM one on the motor? It has 200,000 miles so I wanted to do preventative maintenance before swapping it into a car
You're supposed to put rtv on the inside of bolt holes not outside smh. Why cause now oil can leak out the bolts. Smh
Hey man, do you know if the D16Y8 oil pump fits on a D17a2 block? Thx!
It does not!
What route did you go?
Why is the y7/y8 crank better than the z6?
Oil ports in the crank
@@eyoboyeegaming1187 The Z6 has more oil ports than the y7/y8 if I'm not mistaken
Where you from bro
Can I use this pump on d15b2 block
Yeah they also sell them for The D15 even though there the same only the D16Y engines or OBD2's have the hole for the dipstick on the oil pump
@@boost_edjamesmathew2168 okay that’s so is the one on speedfactory for d16 only cause of dipstick or?
@@Dylan-yn2do If you read what I said all OBDO and OBD1 D15 and D16 oil pumps are interchangeable ie the same and only the OBD2 D16Y weather the D16Y8 or the D16Y7 oil pumps have the provision for the oil dipstick which is the only difference now if you don't understand that I can't help you
@@Dylan-yn2do I'm pretty sure speedfactory sells both the D16Z6 and D16Y8
@@boost_edjamesmathew2168 alright I get you now I’m be to these engines so the obdo, one1 etc had me confused
why do they always put Jazz music!...
Pumps has nothing to do with pressure lol
The oil pump is what creates the oil pressure lol
are you dumb? or are you dumb?
@@pivotguy Naw but you clearly are lol
What lol
@@Autosauce LMFAO no is does not dude pressure come from you bearings do your research.
Stop lying,you bought the pump..... there's no way that got send out without a return address as a matter a fact the post office wont accept anything without a return address