I used a clip on my leatherman everyday of my life! It never leaves my side. Only thing is they don't last more than a couple years. This is a great idea. Thanks for sharing!
You are so talented. My hands hurt so bad and can't do much and a severe back injury, and i get so much pleasure watching your videos. Thank you from just an old guy🙂
I’m not near as fast as I used to be, I too get a lot of hand and back pain so I have to take breaks making things from time to time. Thanks for your kind words my friend!
From one old guy to another; don't give up. My thumbs take most of the morning, Tylenol, and braces to become bearable. I feel for you man. Hang in there.
I swear im not a viral marketer, and i get no money from them whatsoever, but you guys with hand pain/back pain etc, you gotta try that new voltarin gel, it basically magic, and its over the counter now, and not super expensive either! I was in the trades for almost 30 years, and was a child laboror bucking hay and was a masons apprentice beforw i even started that 30 year count, hah, so my hand joints are pretty toast, had surgery on both elbows in my 20's herniated disc at 33, etc. But i smear some of that voktarin gel on, and i can do my hobbies like wrenching on old cars and growing q big garden, chopping wood, etc. Give it a try, and as a bonus, it doesnt rile up my acid reflux like ib profen etc, if your digestive system is dodgy like mine. Just read rhe directions, you cant use at same time as some of the over the counter pain pills.
It is fun heat forming pvc - my favorite sources are gutters, downspouts, the blue plastic from the big water jugs, large diameter electrical piping. You will be amazed at what you can make once you get going - just finished a holster for the winch remote for my side by side. On my to do list is a belt holster to hold my cordless drill when I am on the ladder. For this one I will use a shop built press to help with the forming.
Great vid. Yes the "yeti" is good, but if you want a really good thermo coffee mug, which can be turned upside-down without leaking, you need a "Suntq". Leave making spanners to the spanner makers, let those who know how make mugs.
Thank you for commenting, wouldn’t have found your channel otherwise and subscribed! I ran a 50 ton bridge crane for a while. Just watched your shop tour vid, very nice set up brother! I really love the file cabinet repurpose, wish I had room for one! I’m currently reorganizing my other shop and you inspired me to hang a hatchet on my pegboard, have a great day!
@blademan175 i truly appreciate the follow and if I encouraged you to try something, then my work is done. I'm currently in the progress of a transition, so my shop is downgrading, but I will continue to do content.
I bought mine maybe 10 years ago on eBay. I found it on Amazon too and it seems to be about 22.00 an ounce now, but a little goes a long way. Just search…Rekhaoil for pvc. Thanks and thanks for watching!
Sir...may I ask you please teach me how to make the native American flute..the exact hole placement..thank you very much...I love the PVC clip awesome idea
Can’t remember the video I watched to make mine but this one shows great detail…ruclips.net/video/Sf4MPHxPv9s/видео.htmlsi=8LXZ77LFqmU4D7dj. Thanks for watching and have fun with your project!
I used a clip on my leatherman everyday of my life! It never leaves my side. Only thing is they don't last more than a couple years. This is a great idea. Thanks for sharing!
Glad you liked it. Thank you for watching and your kind words!
You are so talented. My hands hurt so bad and can't do much and a severe back injury, and i get so much pleasure watching your videos. Thank you from just an old guy🙂
I’m not near as fast as I used to be, I too get a lot of hand and back pain so I have to take breaks making things from time to time. Thanks for your kind words my friend!
Praying for you William
Thank you so much
From one old guy to another; don't give up. My thumbs take most of the morning, Tylenol, and braces to become bearable. I feel for you man. Hang in there.
I swear im not a viral marketer, and i get no money from them whatsoever, but you guys with hand pain/back pain etc, you gotta try that new voltarin gel, it basically magic, and its over the counter now, and not super expensive either! I was in the trades for almost 30 years, and was a child laboror bucking hay and was a masons apprentice beforw i even started that 30 year count, hah, so my hand joints are pretty toast, had surgery on both elbows in my 20's herniated disc at 33, etc. But i smear some of that voktarin gel on, and i can do my hobbies like wrenching on old cars and growing q big garden, chopping wood, etc. Give it a try, and as a bonus, it doesnt rile up my acid reflux like ib profen etc, if your digestive system is dodgy like mine. Just read rhe directions, you cant use at same time as some of the over the counter pain pills.
Great idea! I used to watch a lot of the backyard bowyer. My father and I made several bows based on his designs. Have a great day!
Thank you! You too!
Great video! This gives me so many ideas.👍🏻
Thank you, love to hear it! Have a great day!
It is fun heat forming pvc - my favorite sources are gutters, downspouts, the blue plastic from the big water jugs, large diameter electrical piping. You will be amazed at what you can make once you get going - just finished a holster for the winch remote for my side by side. On my to do list is a belt holster to hold my cordless drill when I am on the ladder. For this one I will use a shop built press to help with the forming.
Love it! You are only limited by your imagination! Thanks for sharing and watching!
Awesome, I'm always looking for new things to try & make. Will be trying this for sure.
Thanks!
Enjoyed your video thanks for posting 👍
Thank you and thanks for watching!
I’m really enjoying your channel, so many great ideas. Thanks from Ontario Canada.👍🇨🇦☺️
Thanks so much It means a lot! Have a great day!
Wicked idea! Thanks for sharing.
Thanks and thanks for watching!
Very informative video thanks I enjoyed watching.
Thank you, I appreciate it!
Great job. Thanks for sharing.
Thanks for watching!
Great vid. Yes the "yeti" is good, but if you want a really good thermo coffee mug, which can be turned upside-down without leaking, you need a "Suntq". Leave making spanners to the spanner makers, let those who know how make mugs.
Thanks, I’ll for them! Have a nice day!
Pretty cool stuff, tks for sharing. I bought all of Nicholas Tomihamahs books on bow building and made hundreds of PVC flutes….very versatile material
Very cool! Thanks for watching!
Thanks partner! You mentioned these clips in a video and i have wanted to try some, so thanks.
Happy to help!
Very cool. Thanks for sharing
Thank you for commenting, wouldn’t have found your channel otherwise and subscribed! I ran a 50 ton bridge crane for a while. Just watched your shop tour vid, very nice set up brother! I really love the file cabinet repurpose, wish I had room for one! I’m currently reorganizing my other shop and you inspired me to hang a hatchet on my pegboard, have a great day!
@blademan175 i truly appreciate the follow and if I encouraged you to try something, then my work is done. I'm currently in the progress of a transition, so my shop is downgrading, but I will continue to do content.
What a clever idea! Thanks. B
You are so welcome!
I'm a new subsciber. I love ideas that work. Thank you for sharing.
Thanks for subbing!
Good tip on the clip, my wife wanted to know why I was saving the scrape pvc pipe.
Thanks!
Have a great day too. Stay safe and Happy Holidays to you and your love ones.
Happy holidays!
Very cool idea !! love it and wow that sounds so good very cool new sub howdy from MN
Thanks and thanks for subscribing!
Thanks for sharing i would to learn how to make the flute
You’re welcome, I learned from videos a long time ago, thanks!
Hi Dave!
Howdy Nibs!
Dave, great video, could you post where you get your dye for the pvc that you mix with the clear pvc cleaner ? Thank you again
I bought mine maybe 10 years ago on eBay. I found it on Amazon too and it seems to be about 22.00 an ounce now, but a little goes a long way. Just search…Rekhaoil for pvc. Thanks and thanks for watching!
Thank you
You're welcome! Thank you for watching!
Sir...may I ask you please teach me how to make the native American flute..the exact hole placement..thank you very much...I love the PVC clip awesome idea
Can’t remember the video I watched to make mine but this one shows great detail…ruclips.net/video/Sf4MPHxPv9s/видео.htmlsi=8LXZ77LFqmU4D7dj. Thanks for watching and have fun with your project!
@blademan175 thank you very much for a prompt reply sir
very fucking nice video. Never though of PVC as art material