How to Replace Rear Brake Caliper 2010-2015 Lexus RX350
HTML-код
- Опубликовано: 18 янв 2023
- Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABCR00557
This video shows you how to a (front/rear)brake caliper on your 2010-2015 Lexus RX350. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
2010 Lexus RX350
2011 Lexus RX350
2012 Lexus RX350
2013 Lexus RX350
2014 Lexus RX350
2015 Lexus RX350
Tools you will need:
• 12mm Socket 1aau.to/oa7R/1AXAA00015
• 14mm Socket 1aau.to/oa7R/1AXAA00015
• 17mm Socket 1aau.to/oa7R/1AXAA00015
• 21mm Socket 1aau.to/o4V/1AXAA00043
• Ratchet 1aau.to/obiD/1AXAA00016
• Torque Wrench 1aau.to/oao8/1AXAA00044
• Brake Parts Cleaner
• Silicone Paste
• Bucket
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Done thanks for the coaching. I left the old calliper attached to the flex hose until the new one was all in and swapped it over just before fitting the calliper to the pad frame. Very little fluid leaked out
Thank You!
This is a Great Help!
Thank You for ALL UR GREAT DIY VIDEOS. Where I can view it Before I do it!!! 💯👍💪💯👍💪💯💪💯💪💯
I’m no mechanic so I don’t know anything. So you pump the brakes first then open the bleeder cap right?
Great video tool. I have the 2010 RX350, I've replaced the rotors and pads front and rear, but the brakes still grab...so I'm thinking I need new calipers. 177k miles I think she deserves them, so that's next and I'm thinking that will make the system work as good as new. Love the New England accent too...I'm from north of Boston myself! always check with TRQ first, and 1A Auto. They ALWAYS stand behind the product 100%. Thanks from a customer you've earned.
Question: possible you have a video on changing the fluid in the differential/transfer case of the AWD model of the same year? Thanks again.
Should have loosened all the bolts and made ready the new caliper so you can swap it in quickly to minimize fluid loss.
Who in the world pinches a brake line? Who ? Straw man would.