"Important Battery Message"+Battery Health Fixed With Qianli Copy Power Battery Data Corrector.
HTML-код
- Опубликовано: 19 окт 2024
- From iOS13.2 and phone after iPhone XS, iPhone will pop out “Important battery message” if we replace a new battery on them. It appears not only on locking page, homepage, setting page, but also won’t show battery health data, such as maximum capacity, Peak performance Capability.
Today we are going to introduce Qianli battery corrector, which could revise battery efficiency and cycle with simple operation.
"Qianli" Copy Power Battery Data Corrector + Extension Flex
www.elekworld.c...
3GOA Portable Battery Spot Welder, w/retail package
www.elekworld....
"WLXY" Midget Diagonal Pliers, 125mm
www.elekworld....
For more Repair parts&Tools and Tech support, please visit:
Website: www.elekworld.com
Facebook: / elekworldshop
Instagram: / elekworld
Twitter: / elekworldl
Now this time you've done the job Spectacularly. Thanks for the Subtitles. Slowly slowly you are improving it. Next step is to slowly practice your English. By the way I loved the way you demonstrate everything with examples. Keep it up.
Thanks for encouragement, bro.
As long as viewers understand what he is doing not necessary to improve English. If you want to learn English there are so many free channels. Language is for communication not for show off.
@@masuodking8736 I do agree
Has anyone experienced what happened after a few months? Does the battery condition also go from 100% to 99% and beyond?
Separation always starts from '-', joining always starts from '+'
hi, very interesting video here, i started to learn a lot of new things about phone repairing on myself from your channel, started from changing lcd and now going to this battery replacement with none important battery message display
i would like to ask, can my current qianli icopy plus 2.1 tools replace the function of qianli copy power like the one you used in the video? also for the data recovery part, do i need to always have extra battery for each iphone model so i can plug in that one first for activating the phone and to restore the phone data? Thankyou very much
as far as I know, iCopy don't have the function of copy power and can't be copied.
Better to have a replacement battery to repair battery problem, theoretically there are method to power on iphone but takes time and has risk.
Ridiculous its just a battery peoplehow did it all come to this OMG APPLE
Yup.
Apple should do better
Does the tag on flex stay in the phone? or is it removed after the message is removed?
If you just want remove the warning message, then replace genuine baord on new battery cell will work(check this: ruclips.net/video/sjOCID0IN5g/видео.html).
If you want correct the battery data, then the tag flex need keep in the battery.
Ini yg gua butuhkan kalo ganti batre jadi terbaca lagi hb nya
Silakan periksa tautan perangkat di sini untuk detail lebih lanjut: www.elekworld.com/Shop/productinfo.aspx?proid=14895&categoryid=287. Anda juga dapat menghubungi kami langsung dengan Whatsapp: 0086-13590142302.
After changing battery board successfully is it necessary to use the flex extension
If you just want to remove "important battery message", then it's not necessary.
Does this still happen? I’m thinking of replacing my battery myself but I might have to see a repair center to have it reprogrammed
Yes, from XS all iPhone has this warning message if you replace a new battery.
Hi,what steps did I missed to show me like a new battery on the 3u tools program when I connect the phone to the computer? On the phone shows 100% percent battery life but on 3u tools program doesn't show...
I have icopy 2.2 if I want to revise battery info can I just buy flex extension and it will work ? Or do I have to get Copy Power Data machine?
They are different programmer bro, so only Copy power programmer works with this function.
Hi , thanks for the useful video. May i ask you if this can be used only with genuine batteries or you can solve the service notification issue even with aftermarket batteries?
Hi Luca, this method works on both ori and aftermarket quality battery cell. check here: ruclips.net/video/AWyLDQIuIBU/видео.html
So do you have to leave the QianLi flex in there , only those flexes are at least £15 each then the new battery costs, it runs out expensive and impractical if your replacing screens all day long
Only £8 if you order from us directly, and bro, the biggest value of this flex is help repairman who has high skills profit more from customers who concern the battery health a lot.
hello, I also bought a copy power and I'm trying to rewrite the battery on the 11 series but I can't. I mention that the battery I want to write is not the one that was in the original phone, at the moment it doesn't show the charge. I want it to show the percentage can you help me please
is it possible to write batteries even if the battery I want to write is not the one paired with the motherboard? I have another battery for another phone...
Plz make a video fix the device with i copy let show us what 3utool says after repairing part serial number, ll it still show part maybe change or not 😢
Do you need to keep the extension tag on flex inside the phone all the time or remove it once phone recognized the new battery as genuine batter?
Need keep it in the phone always.
@@Elekworld thank you for your reply. Right after I watched your video, I viewed another one on a similar subject. However, the vlogger suggested that he did not have to leave the tag on flex inside. I am wondering if it is because he used a different phone model or battery. Here is his link ruclips.net/video/dIeCbn6_LNw/видео.html
@@tmarcel1594 I'm not sure, but we suggest keep it in for stable performance.
very helpful! whats best of qianli copy power and rp30 refox?
Definitely Qianli brand, which is big repair tool brand. Also we recommend JCID programmers, check this: ruclips.net/video/q7_GLdJ6Oso/видео.htmlsi=CW9CW-TpUVljVnYU. For price and more details, pls message us: wa.me/8613590142302.
does this work for iPhone SE 2020 also? I read this doesnt work on SE2020..
Hey man, SE 2020 won't have battery warning message.
Hello, I only have one battery… if I put the new one before the modification and I start the phone and after I modify the battery will it work? thank you
Depends on which generation iPhone you have, but definitely the non-genuine battery message will apear.
Just a question. How about the old icopy device. Can be use also?
Nope, it's exclusive battery data programmer device, "Copy Power", iCopy won't work on this function.
I have followed the video step by step. I've connected a genuine battery board to an aftermarket iphone 11 battery and connected a qianli extension flex to the genuine board. However, when I connect the battery to the Copy Power Device and click 'read data', I get an error message saying 'read failed'. I'm using the same software version as in your video. Also, when I test the battery in an Iphone11, the phone does not turn on. I'm certain my soldering is good and have not damaged the board. Could the problem be with the aftermarket battery I am using? Do apple battery boards work with all aftermarket batteries? Thanks
Hi Luke, maybe many possibilities, but aftermarket battery also works with this method, because it only provide power supply, have no data inside battery cell. And below are the steps I want to remind(if you are sure about solder and battery board):
1- qianli extension flex not 100% connected or flex damaged;
2- try to power on the iphone without extension flex, to see if the individual battery works;
3- check if the connector of Qianli copy power has damaged pins etc.
4- one critical step if you can read&revise battery data: install another non-genuine battery before install the new data-revised battery.
Hope it helps, Luke
Hey, did you ever get it working? If so, what was the problem?
@@rapidrepairsau Hi, yes the solution was very simple. I just had to connect the phone to a power source with a lightening/charging cable then it turned on. The battery was already charged as its brand new but I believe this 'activates' the battery somehow.
Thank you
Welcome and thanks for comment. If you like our video please sub our channel for more update soon. 😊
Hi , Do you still need to keep the extension flex along with battery? I am not clear here. thank you 🙏
Yes, still need keep it after data revision. Also there is another solution with built-in board, check this: ruclips.net/video/q7_GLdJ6Oso/видео.html.
After I connect the Apple BMS to a new battery, I find that the battery percentage changes randomly, does not increase in normal steps whilst charging (e.g 75% then 82% etc) and looses charge too quickly. Do you think the battery BMS needs to be 'calibrated' a few times by charging to 100% then fully discharging? Thanks
I think so. Bcuz new battery cell normally has higher capacity than old battery cell, which might led capacity data the motherboard detect different from the BMS old data. Actually we heard some users' feedback that: normally the capacity will show the old BMS data, after they replace a new battery cell, the BMS's capacity became higher. So let's see.
@@Elekworld is this method still working ?
Which are the differences between using this method and JVC? Could you explain it ? thanks a lot for all your effort
@@guilhermebrumdutra7683 JC also can do this, there is no difference but the specific procedure.
First of all, thanks for the video.
The batteries of some brands/models of phones are not easy to find.
Will it work if we buy a battery of another brand phone with compatible current values and remove the flex cable of the dead battery and attach it to the battery we just bought ? Will it cause a problem ?
Example: We have a dead battery Umidigi F2 brand phone battery with battery and we cannot find this battery. If we buy a battery of a different brand with the same current values instead of this battery and remove the battery data cable on the dead battery of the Umidigi F2 phone and mount it on the battery we just bought does the phone work ?
Hi Hasan, I'm not sure if it works or not, but try to bind battery cell and board which are with different brand means risk definitely, especially with parts like battery which provides power. And, actually there are many way to order this battery, check this Umidigi offical EU site: umidigi.eu/umidigi-f2-original-battery-5150-mah-en.
Also you can search on Ebay, Aliexpress, Newegg etc, hope you find new battery asap.
@@Elekworld Thank you for your answer.
Unfortunately, since the Umidigi EU site makes the shipments from its warehouse in China, they unfortunately don't send to Turkey. ( ebay, aliexpress, Newegg etc sites also don't have shipments to Turkey ) In fact, we shouldn't buy a phone made in China.Because getting spare parts is really a problem.
@@hasanaydinoncel7437 Got it, it's really sad news. However, I got a suggestion for you: If possible, maybe you can get your friends in Europe(If you have) help you order this battery, and send to you directly. Then you can get this battery, meanwhile you get parts from EU instead of China.
@@Elekworld Thank you for your suggestion.You are right, I think the only solution will be as you say.
Yes, I have friends living in Europe.I didn't want to inconvenience them for a battery but I guess there doesn't seem to be any other solution.Thing that sounds silly to me.When I ask the sellers why they don't shipping, they say that they cannot send the battery because it is a dangerous goods item.Well, I say, if the battery is within the scope of dangerous goods, when I ask how do you ship to Europe ,they cannot answer.
@@hasanaydinoncel7437 lol, yea it's funny.
Hi, how to buy the whole set-up? How much would be the price?
Hello Shaikh, pls specifiy model# then we can quote price accordingly. Please email elekworldservice@gmail.com for more info.
what application do you use to change the iPhone XSMAX battery serial number
JC V1S could modify the serial No#, but you need connect battery with JC V1S, meanwhile JC V1S connect with computuer JC asistant, and modify SN on computer(make sure JC software is most upgraded). Check this video to know it: ruclips.net/video/n7Z_-g1q0Pc/видео.html.
Qianli Apollo can modify the SN?
Do you know if Quanli iCopy Plus can do this too for iPhones XS and up?
I don't think so, bro.
I have tried with icopy plus 2.2 for xr,it works
@@reezmanreezz3220 Thanks for sharing bro.
Is this a permanent solution? i.e does the new 100% capacity data installed by the Qianli software remain even after turning the phone on and off?
Yes it is, even after turning on and off
@@Elekworld Thank you so much for all your expert information. Keep up the good work!
@Matthew Kendell Welcome, Matthew! 😉
@@Elekworld the reason why it works when you turn it on and off is because you've taken the data from the battery and corrected it and you're using the original iPhone 11 battery board..
@@bassinbillRC5300 Exactly bro. 👍
hi, I don't understand if with qianli can be boost battery from 80% to 90% without replace battery, just need to boost to higher % without message is that possible? about extension flex it is needed just to be same battery data in 3utools same as in iphone setting?
The theory is: 1- replace battery board to remove warning message; 2- install extension flex to revise battery data.
If you just want to revise data, then Qianli or JC V1S could revise to fake battery data.
does it work on IOS 16.1?
On programmer shows 100% and 0 cicles, but on phone with ios 16.1 shows 80% battery life.
Why extension flags is important to install on new battery after removing the battery board from old battery ?
For iPhone 11 series and above, you can't correct the battery data without the extension flex.
@@Elekworld what a sham
Does it work on iOS 15.6.1
for iPhone 11 Pro?
Haven't test yet, but I think it works.
Hai, is this method working on original board that already in service mode?
Not quite sure, some battery were used too many years which led it shows "service". But if you revise the capacity data, maybe "service" disappear(we're not sure), but real capacity could be new battery cell capacity.
will there be one that will work for iPhone 13 pro max?
By now it hasn't any programmer than doing so, but we will keep eyes on this topic
So for each replaced battery you need to add that small adapter into the phone ? .... Seems like the adapter is just "lying" to the system board about the battery status. So in theory you could just present a old battery as brand new :D.
Nope, bcuz you replace a new battery cell with 100% full capacity with just an old battery board, so with the adaptor you just "set" the capacity data to 100% just exact same as brand new battery cell.
It looks like your using a qianli spot welder to weld the battery board to the battery cell. What setting have are you using 1-6?
Also, I have tried welding the battery electrodes to the genuine battery board but am having problems getting the battery anode to fix to the board. The anode seems to be a softer metal than the cathode and the spot welder just burns a hold through it without welding it to the battery board. I've tried a lower welding intensity but it does not weld. I have an iphone 11.
Would the welding be better if I were to weld the battery electrodes underneath the metal cover on the board as opposed to directly on top as shown in the video?
Any tips would be welcome. Thanks
Actually we use 3GOA Portable Battery Spot Welder, link as: www.elekworld.com/shop/productinfo.aspx?proid=15187&categoryid=283. With it the strength was set with 1.
3:32 i don’t understand that, ‘take another battery ‘ you mean take the third one or original 68% (1321 cycle time) or the aftermarket battery?
You copy Read-Write the new battery (aftermarket battery) with genuine apple board first then, put the 3rd battery to test important message pop up? Then you replace the new battery you revised? How abt the old battery? Isn’t it repair the old battery from 68% effeincy to 100% without needing replace new battery?
Hey friend, "another battery" means "3rd battery", not the genuie battery or new aftermarket battery. 3rd battery was used just to activate pop up message, in the end we will use the new revised battery.
@@Elekworld Thanks for your explanation, that’s clear.
By the way can we Read-Write (reset) 83% efficiency to 100% 0% cycle charge time with genuine battery without replacing new battery?
Does the Wear out genuine battery will be repaired full capacity without replacing the New battery? Or do we have to replace the battery
?
@@kaisha4355 If iPhone is iPhone 11 or newer generation, then it doesn't work. If it's older generation than iPhone 11, then it works to revise the data directly.
However, the efficiency and cycle data revise is just revise the data, the real capacity doesn't change. The only way to resume REAL 100% capacity is replace with a new battery.
What cable do I need to connect the qianli copy power to my computer? I purchased a copy power but it did not come wth a cable. Thank you
Type-C cable I think, check here: ruclips.net/video/AWyLDQIuIBU/видео.html
Hi, do you have link to download that software. Thank you
Hey bro, pls visit www.qianlispace.com/download/286.html, normally it has the software for Copy Power device inside. If you already had it, pls visit: www.qianlispace.com/download/317.html to download.
can i use iCopy (qianli) and can this happen only for iP Xs Above, but starting from iOS ? 14?
Bro, iCopy won't fix this battery data correction problem, and "Copy power" only works on iPhone 11 series and above.
What do you use to weld the battery? Is it just solder?
Hi, we use 3GOA Portable Battery Spot Welder to make it, pls goes to: www.elekworld.com/shop/productinfo.aspx?proid=15187&categoryid=283 to check detail. Also you can email service@elekworld.com for price and exclusive service.
Can it be work on iPhone 13
Yes, it works on iP13. For price and more information, please message us: wa.me/8613480186332
Latest software (7.0.1) does not work, also old version 6 does not work now either (Worked before). Please help
Do you mean the most upgraded software of "Qianli QL Repair Helper"? If so pls contact with Qianli team to fix it. Here it is their website: www.qianli.cn/en/jianyi
Where can i buy good batteries?
Hi Alan, pls email service@elekworld.com, we will have professional salesman send a catalog to you.
Hello, after we move the battery terminals and write the set value before assembling the device, the Qianli accessory terminal must be removed or inserted with the phone.
Thank you too
what do you mean by the accessory terminal must be removed and inserted with the phone ???
hello is there something like this for the ipad mini 5? thank you
Never heard by now, bro. However, even the battery health can't be fixed on iPad, I think transplant genuine battery board can remove battery warning message on new beattery, it's same working theory.
@@Elekworld I really appreciate your reply, thanks a lot. Cheers!
@@top5philippines329 welcome bro, pls stay tuned with us for more update.
Please can you help, when I connect the Copy Power to PC, Qianli Repair Helper does not recognise the Copy Power device
pls make sure you upgrade the Qianli repair helper software to latest version.
😢
@@Elekworldكان و
Please is it true that the battery health stays at
100% and doesn't decrease and Also that if the tag
on flex isn't attached to the battery after battery data has been reversed battery
health only shows for few days or weeks and
suddenly disappear please is this true?
The flex need to be kept on the board, even after data revised. By now we didn't hear any feedback that battery health disappear after revise successfually.
Where can we buy it?
We are still working on it to upload on website, please email service@elekworld.com for instant and exclusive 1 on 1 service.
Ok and it works only on iPhone 11?
Wath about xr xs ans xs Max?
@@emmy020891 By now only works on iPhone 11 series, in near future will works on iPhone 12 series.
Not covering iPhone XR, XS, XS Max as far as we know, if it does in future, we will update video introduction.
1 connector for 1 batery?
@@abahgadget9742 yes.
From iOS13.2 and phone after iPhone XS, iPhone will pop out “Important battery message” if we replace a new battery on them. It appears not only on locking page, homepage, setting page, but also won’t show battery health data, such as maximum capacity, Peak performance Capability.
Today we are going to introduce Qianli Copy Power Battery Corrector, which could revise battery efficiency and cycle with simple operation.
"WLXY" Midget Diagonal Pliers, 125mm
www.elekworld.com/shop/productinfo.aspx?proid=6789&categoryid=290
For more Repair parts&Tools and Tech support, please visit:
Website: www.elekworld.com
Facebook: facebook.com/Elekworldshop/
Instagram: instagram.com/elekworld/
Twitter: twitter.com/ElekworldL?lang=en
How is this different than jc v1? Does jc v1 not do this too? Thanks
JC V1 wont' work, it's lower generation programmer. The Qianli is different programmer brand compared with JC, but they both works.
@@Elekworld So when to use each one?
@@mrsemifixit We tested both programmer and both works fine. Check this video for JC V1S: ruclips.net/video/q7_GLdJ6Oso/видео.html
Which work for iphone x/xs/xs max? Quianli plus? And QL Repair Helper work for anyone Quianli?
If you mean battery data revision, by now, this battery data correct only works on iP11, 12 series.
@@Elekworld Which I use for iphone x?
@@Elekworld what solution to remove batteur warning for iPhone XS/xs max/xr?
@@stevekoch7105 if you just want to remove battery warning message, then this video is much more detailed: ruclips.net/video/sjOCID0IN5g/видео.html
you can restore battery health with this equipment if I have an original 85% and boost to 100% without changing the battery
Yes you can, replace the genuine battery board on new battery cell is for removing non-genuine battery warning message.
yea but then its not an accurate reading. you essentially are making it lie.
With a new battery it will work. You can't restore health to a dying battery though. It may say 100% but only until it's charged again. It wouldn't be worth doing as a scam totally pointless.
Hello
I have one problem with battery IP 11 max pro
When i change cycles etc and press write data on software, i have error: „invalid cable id!”
What is it ? Can i fix it ? I try on others qianli cables and still same error
Before i fix 11, 11 pro max and everything Ok
But on this case i dont know what happens..
Pls help than you for answer
Not quite sure, but seems the battery flex or board, or even the battery flex connector pins were damaged maybe.
Where do I download the program for the computer
Bro, here is the download link: www.qianli.cn/en/download/155.html. For any need on repair parts, feel free to message us: wa.me/8613590142302.
How to disable import mesage and back helt to 100 on xs iphone
To remove the important battery message, you can check this video from the begining to 2:32; If you want to revise the battery health, pls use this tool: ruclips.net/video/n7Z_-g1q0Pc/видео.html
How to update software to 6.1.6 version ?
You can upgrade it on the QL repair helper, they have official upgrade instructions
hi just plugged my battery corrector into my laptop the computer didnt recognise it now i have no display on my battery corrector please help
Have you opened the "Qianli Repair Helper" software on computer?
@@Elekworld Yes and copy power just disconnects and laptop says device not recognised are there any update files for it
@@maxvisagie1140 we are checking with Qianli, maybe your computer haven’t installed latest Qianli system.
@@Elekworld hi i cant register for qianli so i cant use updated software
@@maxvisagie1140 Maybe you can contact Qianli directly from their website.
I have Ivalid CableID problem, when I try to restore ifficiency
Not quite sure bcuz there are many possibilities, but seems the battery flex or board, or even the battery flex connector pins were damaged maybe. Maybe you can check them carefully and see what happens.
i have icopy plus 2.1 will that not support
It is said that newest version of iCopy Plus supports battery data correction, but we're not sure on this. We suggest you contact with your salesman, or Qianli team to confirm this.
Any solution whiteout the original battery ?
Can revise battery data, but can't remove "important battery message"
Can i do this on XS Series?
Replace genuine battery board on new battery cell can remove battery warning message, but dont' need extra flex on iPXS. You can use just the JC V1SE or Qianli device to revise the battery capacity.
@@Elekworld great I'll give a try
@@skroturm5723 Good luck, bro.
Can i do that with jcid?
Yes, check this: ruclips.net/video/q7_GLdJ6Oso/видео.html. And JCID also have external battery flex, same procedure with Qianli
@Elekworld : there is no need to apply solder flux + paste on the original BMS board anode/cathode + solder nickel sheet before soldering to the new battery cell ? (like seen on this video: ruclips.net/video/sjOCID0IN5g/видео.html). Thank you
You can learn them step by step from our video course, check this for Hot air gun: ruclips.net/video/gejR_AlZOfw/видео.html, and this for reballing: ruclips.net/video/AY-z8nTiiPI/видео.html. There will be more video course, pls stay tuned.