★ IMPORTANT EDIT: RESIN IS SUPER TOXIC! I was a big dummy in this video and did not use proper protection when handling the UV resin. Wear gloves and a respirator, and make sure you're working in a well-ventilated area!! LEARN FROM MY MISTAKES!! PLEASE!! ★
ellen thygesen it all sounds very modern to me! Reminds me of a cute style video game! Certain ones also like the music in Disney’s and other animator’s new short films with no dialogue.
@@wyaakk it was particularly the music she used in the beginning that reminded me of a disney movie, but yeah you're right! a lot of it does sound like it would belong in a video game or maybe in a studio ghibli movie.
I love this! They are so cute. I feel it's my duty to let you know, since polymer is my thing, the package directions for baking clay are misleading! When you put clay into the oven, it's cold and will take the first fifteen minutes just to heat up to 275, then it needs to sit there for a full fifteen minutes more. All that to say, I'd recommend a minimum of 30 minutes in the oven just so you don't have to think about that stuff. You also won't hurt it going over the time and will just have a stronger end result. Thanks for sharing about polymer clay, it's my favorite, everyone should try it and these pins are a perfect project.
Well, it's a delicate walk, you can burn your pieces if you leave them too long. I know I have ;-; its not a problem if you're going to paint them, but if you have a glow-clay or use colored clay, its best to use a lower temp for a longer bake. Still good tip for letting the clay warm before setting the timer.
The best practice is to use an oven thermometer, and hold the temp at or slightly above 275. The clay burns because our ovens spike, but you can leave it in at 275 for hours without burning it. The colors of some clays will change if left in really long, but lowering the temp is not recommended by the chemists that make the clay. The 275 temp is important to complete the chemical reactions that need to happen to harden the clay. It’s all dependent on your oven though, sometimes an oven runs hot and a lower setting is what you need to get 275 in your oven. You never know without an oven thermometer though, it can be argued that it’s probably the most important tool for a polymer clayer.
moonlightstripes they will hold up and you can definitely make bowls and pots, i think you have to scale it to the medium though, you want to make sure it fits in your oven. It’s going to work up differently than ceramic clay also, but there are so many possibilities with polymer clay.
i forgot to mention this in the video: i use e6000 industrial strength glue to attach my pin backings and magnets to the backs of the clay friends! i then let them sit for a day so the glue cures and the bond is super super strong. :-) i get my magnets and pin backings from michael’s !!
cheyenne barton Do you put the clay in the cold oven or do you pre- heat it? I’m having issues with the clay getting like bubbles and weird textures while in the oven 🥴
You've got me really wanting to try this and I thank you for it! Was wondering if there are any other recommendations you have for a finish instead of resin! I've seen a few meant for Sculpey brand but wasn't totally sure! :)
@@Emmaeggs23 yes!! those work totally fine - a crowd fave in the polymer clay maker community is varathane water-based glossy polyurethane!! i got a small can of that that i'm looking to try on my next batch. if i can get a good glossy even glaze without resin, i'll be very happy hahaha
When she turns old she’s gonna be that one person who’s super nice and always has great ideas and the person who smells like vanilla and always willing to help. 😊
clear nail polish also works for glazing over painted charms! i use it because its cheaper and airdrying is convenient.. though it smells bad when painting . love love love your vids!!
the only thing with nail polish on polymer clay is that it actually will dissolve the clay, so it can make the finish a bit more murky, a cheaper option that doesn't smell as bad & doesn't dissolve clay is polymer clay glaze, which (esp if you get in a big tub) is cheaper than the resin & airdries, but i'm assuming its not as glossy a finish as the resin (i've never tried resin though so i can't say) [again, i get that nail polish is more accessible, but if you are just looking for a cheaper alternative for glazing, polymer clay glaze is the way to go (I also just find it easier to work w/ because its not as much of a pain to clean up compared to polish)]
Liz OHH i learnedk somethin today thanks omg.. i have tried fimo polymer clay glaze but it ended up a lil sticky after drying.. i wonder if polyurethane glaze (meant for wood) can be used?
just got done with an intense therapy session so this is the perfect thing i need to have while i journal/color and take care of myself!! thank you for this, i love you cheyenne!!
you’re not that type of person who doesnt want others to know where you buy your chlotes a. I MEAN you’re selling the pins yet you literally show us the process, mention the products you use and tips and basically everything ! a worth 29 minutes spent. thank you so much 🥺
Hi cheyenne :) I was having a really bad week and feelling really down (aka mental health things) and this video made everything better! I was so excited with these little friends that I jumped out of my couch and cleaned my house, showered and went to my drawing class feeling bright and fresh. Thank you so much for your energy and calmness
The love and dedication you put into your pottery is evident in every curve and color! 🎨 Your work is a beautiful blend of tradition and innovation, and it's a joy to witness. 🌟 Keep sharing your artistry with the world! 🌍
Your commentary and personality is just delightful. I also appreciate the fact that this video isn't sped up to a thousand. It's less stressful to watch than some others out there that are on fast forward times ten. LOL
i've been having one of the worst weeks of my life, but the calming atmosphere of this video let me escape reality for a little while, and i just wanted to say thank you.
my heart leaped when I saw this , I literally just bought some clay today because I was so inspired by your clay friends that I wanted to make my own!! thank you for once again making my day!
just in case that you don't know this: polymer clay will eat up any plastic it touches, I used some pens like you are using the highlighter and learned my lesson :P very cute pins :3 loved the designs
i started watching over the garden wall because i know you love it and i finished it in one sitting!! it’s so good and the animation style feels like a warm hug!! greg is so pure 🥺💕
Wow, I just stopped by your shop and all them are already sold, except a house. I'm happy that you found the right clients, because it would be hard to find in my country people that want to drop that money, even for a handmade precious thing. Let's celebrate the libre albedrío internet era 😄
0:00 Hyde Park Promenade by Sinfonietta Cinematica 1:54 Afternoon Tea Galore by Sinfonietta Cinematica In case anyone wanted to know I found the first two songs!
The second I heard the music in the video I knew I was going to love it. And I DID. This video is perfect on so many levels--the in depth how to, the cat pins, the way it's shot, all of it. So motivating and inspiring. Thanks for sharing this.
Please use nitrile gloves when working with resin, they say the UV resin is fine and blah blah but its really not and it's best to use protection and take precautions cause you can get sick, also please open a window or have a fan on, even using a mask is a good idea to stay safe, it gives off a lot of fumes
You truly have the best videos. You are so incredibly talented and kind hearted and it shows! I’ve been sending your videos to all of my friends because I love them so much!!
these are so cute i got lost in the cuteness and then noticed the monster factory video playin while you were doing the resin glaze it startled me... succotash's gaunt face sure is a serious juxtaposition to the cute pins.
This is the job those couples on hgtv have that help them pay for $10 mil aesthetic tiny houses. In all seriousness though I want my work environment to be this chill.
If your resin is still abit tacky after wards I'd actually recommend a uv lamp that has more lights in it. I had that problem too and for me it's really worth it, that I got a 2nd uv lamp.
Love what you said about the inevitable little mishaps of clay pins. I love handmade crafts and I think the differences in your clay pins are just really endearing!
i'm more on the music side of creativity but i've always wanted to learn to draw/paint/make little things and might i say this has inspired me a great deal! such a lovely video,,, and such great background music :)
I need more of you in my life! I just found your channel and I so desperately need more! Your channel is so bright and happy and I love it! Keep up the great work!!
Thank you for presenting us with this window into your creative process of making clay pins/ magnets. Whenever I'm feeling down I see myself being drawn to your videos. They always manage to soothe my soul. Thank you!!!💖
watching this lovely video as I crochet and I completely agree with what you said about the satisfaction of creating something with your hands from start to finish! I LIVE to say “thanks.... I made it!” It’s just so good. You are so talented and I love your ideas for what you create ❤️
i love the sweet, gentle piano music, despite the fact that you are For Sure watching monster factory at 27:13 LFKFDKGDFf this was a treat to watch, thank you so much.
When you paint the UV resin on, there are actually practice fake nail stands that nail artists use to mount and decorate fake nails. All you need to do is get some sticky tack and stick the pins on top. The stands also usually come on a mount of sorts so you can turn the whole thing around without worrying about getting resin all over your hands
This feels like a chill session with my friend back when we were teenagers & would collaborate together to “find our muse” for our art projects. Very cool. 👌🏻
Found your video and my kid went to pull out the air dry clay immediately. Thanks for sharing your process! So glad we found your channels and shop ^ ^
For me, This is the most fancy and cutest clay pins I've ever seen on the internet. (utube, pinterest ;-) ) Thanks for sharing how to make those things.
Thank you so much for this video!! I've been wanting to make Sculpey pins and this was exactly what I needed for instructions and inspiration! Your pins all turned out so cute. I think the translucency of the Posca pens is just the nature of acrylic paint pens, especially the white and yellows, since the paint has to be so thin to flow through markers well.
Ahhh, happy little friends, that is so cute and adorable. Now I want to try making little pins/magnets too. It looks like so much fun! Your video is also extremely relaxing and fun to watch! Thank you for sharing all your happy little friends!
@@egnogg1244 There's no reason to envy someone for something they didn't earn. No one works for the life they're born into, no one works for the cards they're dealt at birth. I mean, I suppose you could envy someone else's life. But, it'd be pointless, because you're envying something unobtainable. Rather than envying someone for something that neither you nor them could actually obtain alone, envy things or characteristics that were well earned, practiced, trained, honed, etc. Also, there's no telling what goes on behind the scenes. That person you envy could have an eating disorder, an abusive family, a horrifically toxic personality disorder, a loved one with a terminal illness, an inferiority complex, deep seated self-hatred, etc. Just be the best version of yourself that you can be. Be the version of yourself that _you_ would envy.
@@TheChickenRiceBowl okay so that was well thought out and honestly really important life advice but I still want tea edit: right after saying this I realized I worded it kinda weird, sorry for that :')
remy I don’t think they were generalizing PDs as horrifically toxic; they were talking about an example, some PD someone has out there being horrifically toxic. An example out there.
I could just have this playing in the background and occasionally look at what you are doing. The music and your work is so relaxing and fulfilling to watch :)
oh my gosh... your channel and your videos are some of the most aesthetically pleasing things ive ever seen :,) i can tell how invested in your work you are. so pretty!!
Nobody: Cheyenne: I feel like Honey Senpai from Ouran High School Host Club Me: Of course Cheyenne watches anime. And of course she has seen Ouran High School Host Club. . . . . AHHHHHHHHHHH!!!!!!!!!!!!!!
I rolled clay with you, and it feels like we’re making little tiny sweetsies with Honey-senpai in their club room (fancy music!)🐰🍰✨❤️ So here’s cakes for us. 🍰 🎂 🧁✨✨✨
This is my first video I've seen of yours and I love it so much! Your voiceovers are very charming and relatable, and the atmosphere was very relaxing 😊 Thanks to this tutorial I feel inspired to make some now! I began working with resin this year and I just wanted to point out that resin can be irritating to your skin as well as the fumes damaging to your lungs. Even if you haven't experienced any reactions, repeated exposure can make it worse over time and might lead you you being unable to work with resin anymore :( I suggest always making sure you're wearing at least gloves and a face mask when working with resin to avoid that! I also commented to someone else about an alternative to the little clay posts: using a silicone mat (like a square oven mitt from walmart) under the curing lamp so any resin overspill can easily be removed. Just a suggestion! I''m so glad to have found this channel 😊💜
everything about this video just seems so nice and refreshing to me! I don’t know why, but this literally brings me pure joy. Thank you for sharing this! 💗
★ IMPORTANT EDIT: RESIN IS SUPER TOXIC! I was a big dummy in this video and did not use proper protection when handling the UV resin. Wear gloves and a respirator, and make sure you're working in a well-ventilated area!! LEARN FROM MY MISTAKES!! PLEASE!! ★
the classical background music you use makes me feel like i'm watching a disney thing and i love it
ellen thygesen it all sounds very modern to me! Reminds me of a cute style video game! Certain ones also like the music in Disney’s and other animator’s new short films with no dialogue.
@@wyaakk it was particularly the music she used in the beginning that reminded me of a disney movie, but yeah you're right! a lot of it does sound like it would belong in a video game or maybe in a studio ghibli movie.
Me too! :D I love it!
Or Gibli animation :D
especially the first song!
Oh, yes, *forbidden cookies*
mmmmmmmmm yummy
*consume*
*chomp chomp* MMMMMMMMMM
Namm nammm nammm nammm nammm hmmmm
I love this comment
I love this! They are so cute. I feel it's my duty to let you know, since polymer is my thing, the package directions for baking clay are misleading! When you put clay into the oven, it's cold and will take the first fifteen minutes just to heat up to 275, then it needs to sit there for a full fifteen minutes more. All that to say, I'd recommend a minimum of 30 minutes in the oven just so you don't have to think about that stuff. You also won't hurt it going over the time and will just have a stronger end result. Thanks for sharing about polymer clay, it's my favorite, everyone should try it and these pins are a perfect project.
Beth West ooooh good to know!!
Well, it's a delicate walk, you can burn your pieces if you leave them too long. I know I have ;-; its not a problem if you're going to paint them, but if you have a glow-clay or use colored clay, its best to use a lower temp for a longer bake. Still good tip for letting the clay warm before setting the timer.
The best practice is to use an oven thermometer, and hold the temp at or slightly above 275. The clay burns because our ovens spike, but you can leave it in at 275 for hours without burning it. The colors of some clays will change if left in really long, but lowering the temp is not recommended by the chemists that make the clay. The 275 temp is important to complete the chemical reactions that need to happen to harden the clay. It’s all dependent on your oven though, sometimes an oven runs hot and a lower setting is what you need to get 275 in your oven. You never know without an oven thermometer though, it can be argued that it’s probably the most important tool for a polymer clayer.
i'm curios can you make bowls or pots with it? or will it not hold up in the longrun?
moonlightstripes they will hold up and you can definitely make bowls and pots, i think you have to scale it to the medium though, you want to make sure it fits in your oven. It’s going to work up differently than ceramic clay also, but there are so many possibilities with polymer clay.
Your channel just exudes Ghibli energy and it makes me so happy. Thank you, really.
Agree wholeheartedly! All I could think of with the background music was Howl’s Moving Castle! Lol
THAT'S IT! That's the thing, I couldn't pinpoint the vibes.
you know youre an aesthetic queen when you use a mildliner to roll clay
How much did she sue the mild liner and what for?
Sue? Hahahaha.
mariah ahamed really? It has the same letters, the only difference is that the “s” and “u” are switched.
What did the mildliners do that she had to sue them to roll clays
@@mariahahamed4854 what is it then u'se us'e or sue
The music in the background, lack of edgyness and the ADORABLE little pins your making, makes me feel whole again
i forgot to mention this in the video: i use e6000 industrial strength glue to attach my pin backings and magnets to the backs of the clay friends! i then let them sit for a day so the glue cures and the bond is super super strong. :-) i get my magnets and pin backings from michael’s !!
cheyenne barton Do you put the clay in the cold oven or do you pre- heat it? I’m having issues with the clay getting like bubbles and weird textures while in the oven 🥴
@@lizbethdiaz59 oh i definitely preheat the oven to 275, and then put them in for 15 minutes!
cheyenne barton thank you for answering!
You've got me really wanting to try this and I thank you for it! Was wondering if there are any other recommendations you have for a finish instead of resin! I've seen a few meant for Sculpey brand but wasn't totally sure! :)
@@Emmaeggs23 yes!! those work totally fine - a crowd fave in the polymer clay maker community is varathane water-based glossy polyurethane!! i got a small can of that that i'm looking to try on my next batch. if i can get a good glossy even glaze without resin, i'll be very happy hahaha
if it wasn't night out, i would run to the art store rn to grab some polymer clay
abi rose you actually go outside?
What’s that like honestly cannot relate
Kilaci I’m pretty sure that u have hung out with ur friends before
@@natjp0rter630 Sweetheart I get that your an introvert and want to be relatable but no one cares
@@natjp0rter630 only now is your comment valid
I’m good At flute i’m pretty sure it was a joke
Please make more frogs and lemons next time! They were sold out before I could buy one. What a talent, girl!
And oranges!!! Lol
When she turns old she’s gonna be that one person who’s super nice and always has great ideas and the person who smells like vanilla and always willing to help. 😊
This is who I aim to be 🥰🥰🥰
I have been waiting for this video. You are literally in my top 3 favorite youtubers. I really love your videos!
clear nail polish also works for glazing over painted charms! i use it because its cheaper and airdrying is convenient.. though it smells bad when painting . love love love your vids!!
the only thing with nail polish on polymer clay is that it actually will dissolve the clay, so it can make the finish a bit more murky, a cheaper option that doesn't smell as bad & doesn't dissolve clay is polymer clay glaze, which (esp if you get in a big tub) is cheaper than the resin & airdries, but i'm assuming its not as glossy a finish as the resin (i've never tried resin though so i can't say) [again, i get that nail polish is more accessible, but if you are just looking for a cheaper alternative for glazing, polymer clay glaze is the way to go (I also just find it easier to work w/ because its not as much of a pain to clean up compared to polish)]
Liz OHH i learnedk somethin today thanks omg.. i have tried fimo polymer clay glaze but it ended up a lil sticky after drying.. i wonder if polyurethane glaze (meant for wood) can be used?
yes it can!!!! that’s what i use :)
You can use epoxy resin too, my dollarstore sells small amounts :) only issue is it might yellow over time
tiffany does it smell bad tho? Or become yellowish??
These look like they could be items on Animal Crossing, it's so cute
just got done with an intense therapy session so this is the perfect thing i need to have while i journal/color and take care of myself!! thank you for this, i love you cheyenne!!
you’re not that type of person who doesnt want others to know where you buy your chlotes a. I MEAN you’re selling the pins yet you literally show us the process, mention the products you use and tips and basically everything ! a worth 29 minutes spent. thank you so much 🥺
Hi cheyenne :) I was having a really bad week and feelling really down (aka mental health things) and this video made everything better! I was so excited with these little friends that I jumped out of my couch and cleaned my house, showered and went to my drawing class feeling bright and fresh. Thank you so much for your energy and calmness
The love and dedication you put into your pottery is evident in every curve and color! 🎨 Your work is a beautiful blend of tradition and innovation, and it's a joy to witness. 🌟 Keep sharing your artistry with the world! 🌍
Your commentary and personality is just delightful. I also appreciate the fact that this video isn't sped up to a thousand. It's less stressful to watch than some others out there that are on fast forward times ten. LOL
i've been having one of the worst weeks of my life, but the calming atmosphere of this video let me escape reality for a little while, and i just wanted to say thank you.
❤️❤️❤️❤️ sending u all my good vibes right now, u can get through this!! ❤️❤️
Honestly same but you know what? you got this! sending love and blessings your way :)
Thank you guys, I'm in a much better place now :""") I hope that u too have been able to heal, I send you all my love and all the best
I hope your doing better!
Should’ve checked the comments 😝It’s great to hear your doing better hopefully the good times continue
my heart leaped when I saw this , I literally just bought some clay today because I was so inspired by your clay friends that I wanted to make my own!! thank you for once again making my day!
just in case that you don't know this: polymer clay will eat up any plastic it touches, I used some pens like you are using the highlighter and learned my lesson :P
very cute pins :3 loved the designs
Depends on the plastic. Ziploc holds up. But I've definitely seen it dissolve plastic.
Yeah its a certain type of plastic I think # 1 ♳? I definitely melts the foam egg cartons ( my first encounter with it)
It doesnt once its baked
I got some polymer clay on the ruler I was using to make a flat like and it ate it gci fuc igx
i started watching over the garden wall because i know you love it and i finished it in one sitting!! it’s so good and the animation style feels like a warm hug!! greg is so pure 🥺💕
Wow, I just stopped by your shop and all them are already sold, except a house.
I'm happy that you found the right clients, because it would be hard to find in my country people that want to drop that money, even for a handmade precious thing.
Let's celebrate the libre albedrío internet era 😄
0:00 Hyde Park Promenade by Sinfonietta Cinematica
1:54 Afternoon Tea Galore by Sinfonietta Cinematica
In case anyone wanted to know I found the first two songs!
7:40 Flirting at the Masquerade by Franz Gordon
TY :)
thank youuuu
Thank you 😊
The second I heard the music in the video I knew I was going to love it. And I DID. This video is perfect on so many levels--the in depth how to, the cat pins, the way it's shot, all of it. So motivating and inspiring. Thanks for sharing this.
Please use nitrile gloves when working with resin, they say the UV resin is fine and blah blah but its really not and it's best to use protection and take precautions cause you can get sick, also please open a window or have a fan on, even using a mask is a good idea to stay safe, it gives off a lot of fumes
My rabbit loved the music in this video, she started to get the zoomies :-) I cant wait to try making pins like this!
HELL YEAH I'VE BEEN WAITING FOR THIS, ALSO LOVE HOW U USE A MILDLINER TO ROLL THE CLAY
You are everything the world needs.
You truly have the best videos. You are so incredibly talented and kind hearted and it shows! I’ve been sending your videos to all of my friends because I love them so much!!
26:29 that was so unexpected but so fricking adorable
The monster factory video at the end 😂
I loved these little guys’ noses, they look so happy.
“I just need you to know, you’re my favorite human” 🥺❤️❤️❤️
I don't know what I like the most from this video. is it :
1. the content,
2. the video,
3. the music,
4. or even the warm feeling of the house.
🌷🌷🌷
these are arguably the most beautiful things i've ever seen.
- everyone ever
these are so cute i got lost in the cuteness and then noticed the monster factory video playin while you were doing the resin glaze it startled me... succotash's gaunt face sure is a serious juxtaposition to the cute pins.
This is the job those couples on hgtv have that help them pay for $10 mil aesthetic tiny houses. In all seriousness though I want my work environment to be this chill.
they're all adorable but the little pumpkins are TOO CUTE I NEED ONE
If your resin is still abit tacky after wards I'd actually recommend a uv lamp that has more lights in it. I had that problem too and for me it's really worth it, that I got a 2nd uv lamp.
Love what you said about the inevitable little mishaps of clay pins. I love handmade crafts and I think the differences in your clay pins are just really endearing!
when you said: i love you all the time
i said:🥺🥺🥺🥺
i'm more on the music side of creativity but i've always wanted to learn to draw/paint/make little things and might i say this has inspired me a great deal! such a lovely video,,, and such great background music :)
"A lil batch if friends"
Isn't that just what we all want, huh.
I keep coming back here because i love the vibes and music of this video! It makes me calm
pins aren't really my jam, but i would buy the everloving HECK out of an iron-on patch in your style and would treasure it forevermore!!
I need more of you in my life! I just found your channel and I so desperately need more! Your channel is so bright and happy and I love it! Keep up the great work!!
When you were painting the first stripe on the rainbow I honestly thought it was giant macaroni.
i’d pay for a giant macaroni pin-
SAMEEE
Thank you for presenting us with this window into your creative process of making clay pins/ magnets. Whenever I'm feeling down I see myself being drawn to your videos. They always manage to soothe my soul. Thank you!!!💖
Now I want to make some and this is so relaxing to watch, they are beautiful
watching this lovely video as I crochet and I completely agree with what you said about the satisfaction of creating something with your hands from start to finish! I LIVE to say “thanks.... I made it!” It’s just so good. You are so talented and I love your ideas for what you create ❤️
i love the sweet, gentle piano music, despite the fact that you are For Sure watching monster factory at 27:13 LFKFDKGDFf
this was a treat to watch, thank you so much.
Finallyy someone that actually can show the whole process
thank you for bringing joy into this world :,)
I come back to this video when I feel down cause the editing and the aesthetic, in general, is really cozy and heartwarming
When you paint the UV resin on, there are actually practice fake nail stands that nail artists use to mount and decorate fake nails. All you need to do is get some sticky tack and stick the pins on top. The stands also usually come on a mount of sorts so you can turn the whole thing around without worrying about getting resin all over your hands
This feels like a chill session with my friend back when we were teenagers & would collaborate together to “find our muse” for our art projects. Very cool. 👌🏻
the ouran reference made me happy , Live ur best Honey-senpai life~~
this has been my comfort video for over a year
I NEED a Sophie the Cat enamel pin😍😍 they’re perfect and we love Sophie
Found your video and my kid went to pull out the air dry clay immediately. Thanks for sharing your process! So glad we found your channels and shop ^ ^
Can you also use acrylic paint instead of guache? Love how they turned out!
definitely!!
This is slightly bizarre, but your audio quality on this video is PHENOMENAL. Loved it, as always, Cheyenne. You truly are brilliant.
You should create potion bottles pins! also love your content, it's so relaxing
It warms me inside how you call them "friends" 🥺😭💓
can't wait until the semester is over so I can try this :-)
This is so lovely!
I love the way you explain everything, the music, the editing, your voice...!
Congratulations for your work! Its brilliant!!💕
I can't imagine how much your neck hurts after making all these 😂
I watch this about once a week to sooth my anxiety. Thank you for being so amazing and manifesting such kind positive energy 💗
i love how she calls her art friends xD i do that too
For me, This is the most fancy and cutest clay pins I've ever seen on the internet. (utube, pinterest ;-) )
Thanks for sharing how to make those things.
oh yes this is wholesome : )
Thank you so much for this video!! I've been wanting to make Sculpey pins and this was exactly what I needed for instructions and inspiration! Your pins all turned out so cute.
I think the translucency of the Posca pens is just the nature of acrylic paint pens, especially the white and yellows, since the paint has to be so thin to flow through markers well.
me: is that monster factory
video: yeah that's monster factory
Ahhh, happy little friends, that is so cute and adorable. Now I want to try making little pins/magnets too. It looks like so much fun! Your video is also extremely relaxing and fun to watch! Thank you for sharing all your happy little friends!
This lady just casually mentioned going to high tea.
How I *envy* her life from that one statement alone
Don't. Her family or a significant other undoubtedly provided this lifestyle for her.
@@TheChickenRiceBowl ?
@@egnogg1244 There's no reason to envy someone for something they didn't earn. No one works for the life they're born into, no one works for the cards they're dealt at birth. I mean, I suppose you could envy someone else's life. But, it'd be pointless, because you're envying something unobtainable. Rather than envying someone for something that neither you nor them could actually obtain alone, envy things or characteristics that were well earned, practiced, trained, honed, etc.
Also, there's no telling what goes on behind the scenes. That person you envy could have an eating disorder, an abusive family, a horrifically toxic personality disorder, a loved one with a terminal illness, an inferiority complex, deep seated self-hatred, etc.
Just be the best version of yourself that you can be. Be the version of yourself that _you_ would envy.
@@TheChickenRiceBowl okay so that was well thought out and honestly really important life advice but I still want tea edit: right after saying this I realized I worded it kinda weird, sorry for that :')
remy I don’t think they were generalizing PDs as horrifically toxic; they were talking about an example, some PD someone has out there being horrifically toxic. An example out there.
Love the music choice ! You are so creative!
something about how u talk reminds me of bee from bee and puppycat🥺🥺🥺
i watched yesterday lol :3
I could just have this playing in the background and occasionally look at what you are doing. The music and your work is so relaxing and fulfilling to watch :)
*I want to have friendsto do little clay friends with them :(*
ahhh the monster factory video playing in the background. love it.
I wish I could do this but I'm a perfectionist so I'd get super mad at myself :(
abigail foote omg yes me too
abigail foote me too. I’ve let my polymers sit for so long that I’m mad at that too. Let’s just... try
I'm a perfectionist too and it's soo nice to find something that u don't have to be perfect
Which u can mess up etc etc
I just wanna say I love this video because you made super cute pins with virtually nothing but at and some stuff around your house.
pardon me as i watch monster factory on your screen while you resin 27:30
oh my gosh... your channel and your videos are some of the most aesthetically pleasing things ive ever seen :,) i can tell how invested in your work you are. so pretty!!
You need some sort of mini potter's wheel to do your resin xD
I cried out of joy looking at these tiny creations. Oh you made my day. 🥰
Nobody:
Cheyenne: I feel like Honey Senpai from Ouran High School Host Club
Me: Of course Cheyenne watches anime. And of course she has seen Ouran High School Host Club.
.
.
.
.
AHHHHHHHHHHH!!!!!!!!!!!!!!
I would just like to say that this video was so warm and calming to watch thank you! 💖💞
I rolled clay with you, and it feels like we’re making little tiny sweetsies with Honey-senpai in their club room (fancy music!)🐰🍰✨❤️ So here’s cakes for us. 🍰 🎂 🧁✨✨✨
this video just made me wayy to happy. Like I was getting so excited as they were coming to life and then the resin. that gloss omggg. i love it
Honestly that orange MildLiner is such a terrible colour (9/10 times) a rolling pin is the best use for it.
Your style reminds me of over the garden wall a little! Absolutely beautiful!
This is my first video I've seen of yours and I love it so much! Your voiceovers are very charming and relatable, and the atmosphere was very relaxing 😊 Thanks to this tutorial I feel inspired to make some now! I began working with resin this year and I just wanted to point out that resin can be irritating to your skin as well as the fumes damaging to your lungs. Even if you haven't experienced any reactions, repeated exposure can make it worse over time and might lead you you being unable to work with resin anymore :( I suggest always making sure you're wearing at least gloves and a face mask when working with resin to avoid that!
I also commented to someone else about an alternative to the little clay posts: using a silicone mat (like a square oven mitt from walmart) under the curing lamp so any resin overspill can easily be removed. Just a suggestion!
I''m so glad to have found this channel 😊💜
these r so whimsical and all these lil friends are so cute!! and this was so relaxing to watch thank u so much for this wholesome content ;v;
For some reason this is realllly aesthetic
everything about this video just seems so nice and refreshing to me! I don’t know why, but this literally brings me pure joy. Thank you for sharing this! 💗
i'm so glad i came across your channel. browsing your shop and... your work is impeccable, marvelous, beautiful... ugh heart eyes!!
follow up, since i am a year late to this video. do you plan on making more of these clay pins?
another follow up- 26:26 i'm not crying, you are
omg, watching you paint these clay friends is oddly satisfying. love it!