How To: Whirlpool/KitchenAid/Maytag Circulation Motor WPW10757217
HTML-код
- Опубликовано: 20 апр 2014
- How To Replace: Whirlpool/KitchenAid/Maytag Circulation Motor WPW10757217 www.appliancepartspros.com/whi...
Symptoms: Motor has gone bad and you’re not getting any water pressure.
Tools: Phillips screwdriver, 5/16” nut driver, 5/8” wrench, 1/4” drive with a 3/8” socket with long extension.
This Whirlpool/KitchenAid/Maytag made Dishwasher Circulation Motor replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Dishwashers: W10757217, 8268405, W10239404, 8193509, 8193531, 8268378, 8268398, 8268407, 8268408, 8268409, 8531020, 8531021, 8534941, 8534942, 8535089, 8535759, 8535760, 8564073.
Buy the new Dishwasher Circulation Motor WPW10757217 here: www.appliancepartspros.com/whi...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros Хобби
Appliance Parts Pro is the BOMB!!! I can't thank you enough for this video and the help I received from your call center professionals. They were super helpful and patient with diagnosing my Kitchen Aid dishwasher problem. I must have talked with everyone there over the last week or so. Replacing my circulating motor didn't look too difficult and wouldn't have been except for a few snags. When I was at my wits end today one of your pro's figured out a solution. My dishwasher is just finishing up a cycle and I couldn't be happier!! THANK YOU, THANK YOU!!!!
You are welcome! Glad we were able to assist you! If we can help you with anything in the future please let us know.
This has been the holy grail I have been looking for! That bolt was so well hidden!
Glad we were able to help you. If there is anything we can help you with in the future please let us know!
THANK YOU for this video! I replaced the pump and now our dishwasher is like new. Before, it was making a very loud noise, then it died completely. Ordered the part on Ebay, saved over $500 compared with buying a whole new dishwasher! Took me about 2 hours total for the whole job.
We're happy to help! Next time, we hope that you'll consider buying your parts from us. We have competitive pricing as well as a 365 day warranty that most other vendors don't match.
Hi there. Do you sell the run capacitor for this motor by itself? Of so what's the part number
I need the Maytag Circulation Motor Seal just like the one in your Video. Whats the Item No. Please
Would the steps in this video also work for model number KUDC10IXWH0?
Would there be any reason the new replacement motor would be loud? It is pumping, just louder than the old motor before it died.
Manufacturers do change the design of parts frequently in an attempt to make parts compatible with as many of their appliances as possible, so a design change could be the cause in the volume change. However, if it's significantly louder there may be a problem.
do I need to take out the chopper blade first?
On my Maytag, the chopper needs to be removed first.
Ugh.. just did all this and the washer still isn't washing.
Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
Here we go! 6yr old dishwasher running on soft water, Both racks complete RUST, upper tracks chucking ball bearings and now a bad motor @ 185bucks??? I'M OUT! I'd like to kick the maytag man right square in the nuts.
Should have bought the nylon rack upgrade, You never would have had the rust issue
@@badguacamole3709 Wasn't given the opportunity or I would have. Let's face it, today's appliances suck!
Thank you! We fixed our dishwasher for the price it would've cost the repair guy just to come look at it.
Glad you were able to complete your repair. If there is anything we can help you with in the future please let us know.