Very cool project! I never changed from my first radio, which is the tango 2. i love the size, but have barely touched other radios. But this vid is making me think of a case mod! :) great vid, broll was sick!
@@Yannick.FPV. hey man! Thanks thanks! I have tried my mate's TX16s and the Zorro it's either too big or too small. So the boxer is just right. Never tried the Tango 2 before but if you are modding it I wanna see! So do it bro! Make it "yours"
@@stayhealthy6954 wow! Appreciate the welcome mate. Definitely if I am heading there I will male sure I find you. Currently in Singapore now looking for some awesome FPV pilots whom I met kn RUclips as well.
@@Dudlushka high five mate! Hahaha but I kinda got use to it after a few session of flight so is all OK now ma bro! But the boxer now has got this extremely loud fan noise. Mmmm gotta open it back up and check what's wrong with it.
@@CurlyFPV I hope nothing serious :D. Keep up the good job! p.s.: Yesterday I opened it up to install my gimbal backlight. I removed the factory greese from the trottle arm that felt like glue or honey or something... and replaced with some normal one... I like it much more now
If they feel completely different, have you thought about trying to tighten or loosen the gimbal spring adjustments to the same setting your old gimbals had? Or have u already played around with the tensions etc? Btw u deserve more followers! I thought u had way more before i looked at your channel after that video!
I think the difference that I felt comes from the stick travel distance, with the installed LEDs the gimbal now sits deeper into the housing so that is what I am suspecting to be the issue. But it kinda got alright after the 17th pack. I will still try on your suggestion and play around with it though. Did you mod yours as well?
@@CurlyFPV i also have a question! Because your gimbals sit deeper inside the radio, when you max out your gimbals do they touch the housing of the boxer?
@@animox6303 hello hello..no it doesn't bur if you are a pincher then maybe the fingers will kinda get in between the sticks and the housing..then again just need to get use to that. I think the whole thing is the only drawback after installing the LEDs. Don't know if there are any gurus out there that can solve this.
I really want to upgrade my Radiomaster Pocket!!! With Blue gimbals and a Black shell. But there are no blue gimbals available as far as i know. Which chair do you use btw?
i did my boxer the same way and it looks sick i went for bright orange and i love it :D sadly just found this video after im done you have to make sure to cover the insides of the buttons or clean them out before the paint is to dry otherwise the buttons wont move very well otherwise its pretty easy (aside from getting the nuts on the switches lose :D )
@@Gumby_FPV difference is hugeeeee bro! I kinda got use to it after the 17th packs! Due to the LED I installed the gimbal sits deeper in the radio so for that first pack u saw on the flight video..I was flying like shit man..and sorry for the cursing in the vid hahahaa
@@OldManse09 just the letterring? Guess you need to send it to the pros man it will be so difficult to mask them! I guess the only way is using a paint brush? But that's hell lotta work. If you are going for it I wanna see mate.
Hey fellow FPV pilots! Thanks for dropping by, will you put in all these effort or just get the Radiomaster Crush instead?
Looks good 👍
@@SchroediFPV thanks mate! Appreciate the time spent on commenting and glad you like it!
Looks good I'm going for a Radiomaster Boxer and will upgrade the same!
Awesome! I can guarantee you that you will love it!
yes machined hall sensor gimbals feel so much better than plastic ones they are a must upgrade
High five mate! Its been 2 weeks with it and I have Zero regrets!
Very cool project! I never changed from my first radio, which is the tango 2. i love the size, but have barely touched other radios. But this vid is making me think of a case mod! :) great vid, broll was sick!
@@Yannick.FPV. hey man! Thanks thanks! I have tried my mate's TX16s and the Zorro it's either too big or too small. So the boxer is just right. Never tried the Tango 2 before but if you are modding it I wanna see! So do it bro! Make it "yours"
there is a transparent case for the tango
@@bluefpv3263 thanks for letting us know. @Yannick.FPV. check this out.
Damn that sick bro❤❤❤
Thanks man! I am super loving it too!
@@CurlyFPV if u happened to come to bali. We can fly fpv together.
@@stayhealthy6954 wow! Appreciate the welcome mate. Definitely if I am heading there I will male sure I find you. Currently in Singapore now looking for some awesome FPV pilots whom I met kn RUclips as well.
@@CurlyFPV that cool am also from Singapore but I moved to bali
@@stayhealthy6954 only been to Bali once and that was like years ago! So it will be great to visit again!
Awesome brooo
Thank you my bro!
I had the same experience... going from zorro to boxer. Maybe just the spring tension is too much?
@@Dudlushka high five mate! Hahaha but I kinda got use to it after a few session of flight so is all OK now ma bro! But the boxer now has got this extremely loud fan noise. Mmmm gotta open it back up and check what's wrong with it.
@@CurlyFPV I hope nothing serious :D. Keep up the good job!
p.s.: Yesterday I opened it up to install my gimbal backlight. I removed the factory greese from the trottle arm that felt like glue or honey or something... and replaced with some normal one... I like it much more now
@Dudlushka ahhh what did you use to replace them bro?
Im changing to a boer. I have been flyin with qx7 for 5 years plus, thanks for the vid
@@MrCrowleyandhisdrone you will enjoy it I am sure. Even without the upgrades. It really is a great radio.
If they feel completely different, have you thought about trying to tighten or loosen the gimbal spring adjustments to the same setting your old gimbals had? Or have u already played around with the tensions etc?
Btw u deserve more followers! I thought u had way more before i looked at your channel after that video!
I think the difference that I felt comes from the stick travel distance, with the installed LEDs the gimbal now sits deeper into the housing so that is what I am suspecting to be the issue. But it kinda got alright after the 17th pack. I will still try on your suggestion and play around with it though. Did you mod yours as well?
And thanks so much for the kind words man! Appreciate it alot!
@@CurlyFPV i also have a question! Because your gimbals sit deeper inside the radio, when you max out your gimbals do they touch the housing of the boxer?
@@animox6303 hello hello..no it doesn't bur if you are a pincher then maybe the fingers will kinda get in between the sticks and the housing..then again just need to get use to that. I think the whole thing is the only drawback after installing the LEDs. Don't know if there are any gurus out there that can solve this.
Omg it looks like Darth Maul! But you can’t go wrong with AG01, it’s like adding 10HP to your car by slapping on the Mugen stickers.
HAHAHAHAHA! I like that metaphor!
I really want to upgrade my Radiomaster Pocket!!! With Blue gimbals and a Black shell. But there are no blue gimbals available as far as i know. Which chair do you use btw?
Hey buddy! Black and Red/Gold looks good. The pocket is using a smaller size gimbal right? Do they have red/gold? Chair as in the one I am sitting in?
@@CurlyFPV Yes, they use smaller gimbals. But the smaller ones are only available in black 😭 And yes, i mean the chair, that you are sitting in 😊
@@mplouis ok..go get a Boxer! Hahahaha...ahhh the chair I am using is from Decathlon.
@@CurlyFPV I want to get a boxer, but it is a but to expensive for me, because i already have the pocket one
@@mplouis is ok mate fly with wat u have then slowly upgrade. Don't go crazy with the spending! WE STILL NEED TO BUFFER THE BUDGET WHEN WE CRASH! LOL
i did my boxer the same way and it looks sick
i went for bright orange and i love it :D
sadly just found this video after im done
you have to make sure to cover the insides of the buttons or clean them out before the paint is to dry otherwise the buttons wont move very well
otherwise its pretty easy (aside from getting the nuts on the switches lose :D )
@@bluefpv3263 yeah man! High five! And yes those nuts got me going nuts! Lol! Show me show me! I wanna see yours.
@@CurlyFPV i didnt do a video on it but i got some with stick cam
ruclips.net/user/shortsww1GqdkerGk?feature=share
@@bluefpv3263 nice! Gonna go watch it now.
Did you calibrate the new gimbals?
@@williamtam6732 ya mate, did the calibration.
Is the AG01 the same for the TX-16? That’s all I can seem to find for sale. I assume they work for both?
Looks sick by the way!
@@Gumby_FPV ya bro is the same it works for both.
@@Gumby_FPV thanks man! Appreciate it!
@@CurlyFPV awesome!! Thanks!! Did you notice a big difference? Are they worth getting?
@@Gumby_FPV difference is hugeeeee bro! I kinda got use to it after the 17th packs! Due to the LED I installed the gimbal sits deeper in the radio so for that first pack u saw on the flight video..I was flying like shit man..and sorry for the cursing in the vid hahahaa
Does anyone have a way to color / fill the lettering on the buttons?😊
@@OldManse09 just the letterring? Guess you need to send it to the pros man it will be so difficult to mask them! I guess the only way is using a paint brush? But that's hell lotta work. If you are going for it I wanna see mate.
Broo.. got bring in AG01 or not? Just got a Boxer and looking for a set of AG01s and LED like what I have in my TX16S. 😘
@@velocistafpv where u at mate? If you are in Malaysia then you can contact FPVtribe. But if you are anywhere else hehhee..I can't help man.
@@CurlyFPV that's why lo, saw the FPVTribe cap ur wearing. Hahaha. Just got my second VX3.5 frame as spare a few days ago from FPVTribe. 😘
@@velocistafpv Hahaha u can call him to order the things for you bro. He can settle for you nicely. Enjoying your VX3.5?
@@CurlyFPV Lovin' it! I think we flew together in Kwasa and Kundang before?
@@velocistafpv did we bro? Ohhhh my man! You the one with crazy ass looking 3d prints mount?
❤
@@azrina5331 thanks ma bro!
Chao, Lesly Chao... ))))
кто этот бурят?
Thanks for dropping in, I tried but I can't understand your comment. But appreciate it anyways. 💯
@@CurlyFPV it's kind of joke 😀
Sorry )))
@@andrey-kramer Hahaha no prob mate!