Mantab ini masbro. Ngasah chisels & planer blade jadi lbh praktis dan mudah. Senang juga liat si kuning mejeng di situ, seger kaya lemon. Coba someday bikin yg jig buat ngasah mata bor masbro juga mas bro. Makasih sdh berbagi dan menginspirasi.
@@plywoodworking Asyeeekk. Siap kakak. BTW itu vernier caliper digitalnya pake tjap apa mas? Mening. Sama sekalian tanya, itu mata bor buat bikin lobang tatakan magnetnya jenis/tipe bornya apa itu namanya mas?
Vernier caliperya merek insize mas sekelah am mitutoya, klo mitutoyo jepang klo gk salah insize australia ato mana gitu,mata borya namaya forsner besarya ada nomerya
@@plywoodworking That's all.. Insize! Pantesan saya familiar dengan warna dan desainnya, ternyata sdh saya masukin di wishlist toped sama. Mitutoyo harganya bikin jebol kas, kayaknya memang saya milih Insize aja lah.. worth it alternative! Ohyes.. forsner. Kalau yg buat besi ada gak ya si kevin forsner ini mas? Makasih bgt infonya.
May I suggest that you flatten the back side of the chisel first over its entire face than sharpen the bevel, that way you eliminate friction as much as possible.
hi buddy, as always beautiful projects but the big problems are that you give us a lot of measures but it lacks too much, you know to reproduce what you do it takes us all the measures
thank you sorry about, i try see detail step by step but sometime look boring coz to many measure, thank you for suggestion i will repair on next video
See, and that is when the real Craftsman comes forward, using his mind and creativity instead of the copyist who can only make what other people telling him what to make.
@@plywoodworking Hi, Great projects and all very handy and well constructed. Love the way you give sizes and step by step information on the build. I will be making this and 2 other of your projects soon.
Great stuff I love what you did but I couldn't figure out the name plywood. Ply is a sheet of wood called veneer. The stuff you are using is partial say sawdust compressed. But thanks for the great videos you opened my eyes often.
Thank you for all, if you follow this channel from begin, first i use plywood but i cant find birch plywood on my country and quality plywood in here very bad, curve, not flaten so many bubble inside,coz i made jig that not good, i change with mdf but not durable and so many comment mdf not good material, i found new material hmr this is very good material look like mdf but more solid, durable, flaten and water resistant, that why i use this material until now😅
Siap mas, tgnya kena pinggiranya penggaris bnrya mau gm dikasih tissu tp ada darah jdi lbh gk enak pas dshoot. Iya kbetulan ada promo sy beli, suaraya halus bgt
@@plywoodworking iya Masbro, next time hati² ya, ntar ga bisa ngeshoot video baru, thanks for making a good project, edit the video just to entertain us, makasih ya mas, Salam dari Malaysia ✌️
In my country all use mm not inches. Hmr thickness start from 3mm - 6-9-12-15-18. Sometime i confuse if thickness use inches, i recomended use 18mm or 3/4 more strong and stabil if use plywood but if use hmr i can use 15mm coz hmr very solid and flat
This stone combije with green fiber i dont know about detail, i only use grid 120 but more.good if step by step 120-400-600-2000 the result more good and durable sharpen
Mantab ini masbro. Ngasah chisels & planer blade jadi lbh praktis dan mudah. Senang juga liat si kuning mejeng di situ, seger kaya lemon. Coba someday bikin yg jig buat ngasah mata bor masbro juga mas bro. Makasih sdh berbagi dan menginspirasi.
Siap sama2 bnrya ini bs buat mata bor jga cm gak gk sempat buat coz harus tayang nanti bakalan dibuat mcm2 pake si lemon
@@plywoodworking Asyeeekk. Siap kakak. BTW itu vernier caliper digitalnya pake tjap apa mas? Mening. Sama sekalian tanya, itu mata bor buat bikin lobang tatakan magnetnya jenis/tipe bornya apa itu namanya mas?
Vernier caliperya merek insize mas sekelah am mitutoya, klo mitutoyo jepang klo gk salah insize australia ato mana gitu,mata borya namaya forsner besarya ada nomerya
@@plywoodworking That's all.. Insize! Pantesan saya familiar dengan warna dan desainnya, ternyata sdh saya masukin di wishlist toped sama. Mitutoyo harganya bikin jebol kas, kayaknya memang saya milih Insize aja lah.. worth it alternative! Ohyes.. forsner. Kalau yg buat besi ada gak ya si kevin forsner ini mas? Makasih bgt infonya.
GREAT piece of work.Sorry to hear about injury.Stay safe.
thank you very much, that only small injury, i put ruler and the edge sharpen
@@plywoodworking Good to know it did not end up in saw. Keep up the good projects.Love your work.
@@henryrossouw930 thank you, safety first!!
Good job! You videos inspire me making things.
Awesome! Thank you!
Good engineering solution. I liked this design. Good luck
glad, you like thank you
awesome.. Great job
Thank you very much
Excellent. Thank you so much
You are welcome!
iş kazası olmuş geçmiş olsun daha dikkatli olmanı dilerim işin kolay gelsin
thank you, that only small injury, i put ruler and the edge sharpen
Perfect build man, good job !
Greets Danny from the Netherlands
thank you very much
May I suggest that you flatten the back side of the chisel first over its entire face than sharpen the bevel, that way you eliminate friction as much as possible.
great suggestion, i will try that. thank you very much
Really fantastic work, dude! Well done!!! 😃
Just take care with your hands! 😬
Anyway, stay safe there with your family! 🖖😊
Thanks! Will do!
As always Keren mas... hati2 tangannya mas.. ini yg sering chat dirimu mas.. wkkwkw
Once again good job n excelent result. ☺
siap mas makasih banyak mas, safety first
Where can I find the link to the Freeplan for Adjustable Sharpening Jig with neodymium for chisel and planer blade.
Fred
join on plywoodworking tips & trick gorup on Fb and follow plywoodworking tips & trick page
hi buddy, as always beautiful projects but the big problems are that you give us a lot of measures but it lacks too much, you know to reproduce what you do it takes us all the measures
thank you sorry about, i try see detail step by step but sometime look boring coz to many measure, thank you for suggestion i will repair on next video
See, and that is when the real Craftsman comes forward, using his mind and creativity instead of the copyist who can only make what other people telling him what to make.
@@plywoodworking Hi, Great projects and all very handy and well constructed. Love the way you give sizes and step by step information on the build. I will be making this and 2 other of your projects soon.
Neodymium part is the most interesting part here ...
thank you
Great stuff I love what you did but I couldn't figure out the name plywood. Ply is a sheet of wood called veneer. The stuff you are using is partial say sawdust compressed. But thanks for the great videos you opened my eyes often.
Thank you for all, if you follow this channel from begin, first i use plywood but i cant find birch plywood on my country and quality plywood in here very bad, curve, not flaten so many bubble inside,coz i made jig that not good, i change with mdf but not durable and so many comment mdf not good material, i found new material hmr this is very good material look like mdf but more solid, durable, flaten and water resistant, that why i use this material until now😅
Stay safe ya masbro, wah keliatan bench grinder nya baru dari DeWalt loohhh, mantap MaskBro ✌️
Siap mas, tgnya kena pinggiranya penggaris bnrya mau gm dikasih tissu tp ada darah jdi lbh gk enak pas dshoot. Iya kbetulan ada promo sy beli, suaraya halus bgt
@@plywoodworking iya Masbro, next time hati² ya, ntar ga bisa ngeshoot video baru, thanks for making a good project, edit the video just to entertain us, makasih ya mas, Salam dari Malaysia ✌️
Love your projects. How thick is the 15mm hmr?
almost all use 15 mm HMR
@@plywoodworking I am wondering what is the actual thickness of the hmr, is it exactly 15mm thick or like our 1/2 plywood at 15/32?
In my country all use mm not inches. Hmr thickness start from 3mm - 6-9-12-15-18. Sometime i confuse if thickness use inches, i recomended use 18mm or 3/4 more strong and stabil if use plywood but if use hmr i can use 15mm coz hmr very solid and flat
What kind of stone do you sharpen a chisel?
Is the metal not burning?
This stone combije with green fiber i dont know about detail, i only use grid 120 but more.good if step by step 120-400-600-2000 the result more good and durable sharpen
@@plywoodworking Well done, you have golden hands !!!
From Belarus with love!
@@Serega_Siniy Golden hands with red bloody injured finger. Bloody May..
@@plywoodworking This step by step grid guide is very important. Thanks mate.
When grinding, Heat will weaken the blade. better slow down the RPM or water cooling.
Thank you very much
👍
thank you
So sad, our talented craftsman got injured in this project. Get well soon for your *left middle finger* . Big thanks for masking tape..
thank you very much
+++
thank you very much