@@ErCanEverything i have Parkside PGPA 40 li a1 water pump and 36V ebike batery just ask if you did it, first i will have to open it to see what voltage suplu the electronic and motor 20V or 40V
@@nesic1 easily. 36v, 40v and 42v charging voltage are for the same - its 10s battery, 10 fingers in serial connection. 18v Makita system and 20v parkside - are same 5s of lithium, just different connector
Nie jestem pewny, ale jak chcesz to sprawdź rezystor 10k podłącz od minusa baterii do następnego slotu (obok minusa na baterii). Opornik symuluje termistor wewnątrz baterii, bez tego niektóre urządzenia nie będą działać. Stosuje baterie parkside do wielu różnych marek narzędzi i urządzeń.
Not wise though.. with that "adapter" you are missing a voltage sensor that will stop the tool to deplete the battery to very low voltages, ruining it.. ask me as I know 😅 (Sadly the voltage sensor is not in the parkside batteries, but in the tool, so the battery cannot protect itself..)
hi, can you tell me where you found the individual contacts?
between gnd and T pin must be from 2 to 2.7 V otherwise the tool will work for 2 seconds and will not turn on again
I have tried this in many X20 tools and they work without stopping🙂
ruclips.net/user/shortsZciRijs5Nuc?feature=share
that is why he has a resistor feeding around 2V to T pin if the resistor is 10kOhm
@@ErCanEverything Would feeeding 40V on one side would work or does it have to be 2 sides per 20Volts?
did you try to use real external battery 36V from ebike?
This is a good idea, I have such a battery and I will try it🙂
@@ErCanEverything i have Parkside PGPA 40 li a1 water pump and 36V ebike batery just ask if you did it, first i will have to open it to see what voltage suplu the electronic and motor 20V or 40V
@@nesic1 easily.
36v, 40v and 42v charging voltage are for the same - its 10s battery, 10 fingers in serial connection.
18v Makita system and 20v parkside - are same 5s of lithium, just different connector
Ohm of resistor?
10 Kohm
Where did u get that conector?
From an old faulty battery
Can i make the same on the total battery chainsaw?
Nice idea 💡
Thank you my Friend🙏🙂🤝🤝🤝
Why? Do'nt the batteries fit the saw?
How use with this inprovisition?!
I just wanted to show you that you can work with batteries from another brand
@@ErCanEverything you didn't show how to use it. cut a tree to prove
ruclips.net/video/x2Rx9y8Omlc/видео.html
ruclips.net/user/shortsb_MnpmhciSQ?feature=share
How use resistor?
Nie jestem pewny, ale jak chcesz to sprawdź rezystor 10k podłącz od minusa baterii do następnego slotu (obok minusa na baterii). Opornik symuluje termistor wewnątrz baterii, bez tego niektóre urządzenia nie będą działać.
Stosuje baterie parkside do wielu różnych marek narzędzi i urządzeń.
Termistor is bild in battery from some ryzon over heating protection cells
no, its not thermistor :D
Salve! Ho un tagliabordi a 22v che con batteria parkside funziona 2 secondi...con questa resistenza da 10kohm potrebbe risolvere il mio problema?
Not wise though.. with that "adapter" you are missing a voltage sensor that will stop the tool to deplete the battery to very low voltages, ruining it.. ask me as I know 😅
(Sadly the voltage sensor is not in the parkside batteries, but in the tool, so the battery cannot protect itself..)
what's the point of doing it?
Salut.
La résistance tu la branche sur le T et le négatif on est d'accord ?
😅Jak będziesz pracował z tymi kabelkami 😂😂i po co to?
Can't you just put the battery in the tool lol
😁😂😂😂
La Vera domanda è "perché?"
Für was?
Что ты зделал маньяк?
On a saw like ths, skip the clowns 🤡 and use a real OEM battery for safety sake.
It saves the PAIN$.
Horrible video - I've no idea what's going on, and the sound was horrible.
And What????🤦🤦🤦😉
@toolbrothers