WD40 Specialist Silicone For Locks | Mr Locksmith

Поделиться
HTML-код
  • Опубликовано: 26 янв 2025

Комментарии • 31

  • @odinslockllc
    @odinslockllc 2 года назад +3

    This is a rough topic to discuss. Lots of opinions out there. It’s important to say that “WD-40” is a brand name. There’s more than a couple of dozen versions out there where some are just water displacing as the “original” is and others are penetrants to full blown lubricants. I personally look for stuff that sprays clear and will evaporate and leaves behind something that will continue to lubricate. Many brands offer that. I used to use Masters Lock Lube, and now mostly use Houdini products for Locksmithing. It depends on where I gotta go to get it though. Houdini is in Lowes or at lock supply house. WD40 is good to have around but it’s also what I buy for cheap repair stuff or for the kids to use on their bikes etc. If I caught them using my Houdini on their bikes I’d have a heart attack🤣. Everyone has their preference. Thanks for sharing!

  • @lindawu7960
    @lindawu7960 7 месяцев назад +1

    Thanks for sharing. My lock works like a charm after spraying WD40 silicone 😊

  • @BillMetter
    @BillMetter 2 года назад

    I just want to thank you for this tip. I haven’t been able to turn the lock on my 2014 Toyota Tundra tailgate in over a year. I purchased the WD40 you suggested and after spraying the lock I was able to use it the next day.

  • @BunnyLang
    @BunnyLang 2 месяца назад +1

    Very helpful. Thank you.

  • @Bean_Sprout_3
    @Bean_Sprout_3 6 месяцев назад +1

    Hello, I have a 2003 Honda civic the driver side door lock won’t turn when you put the key in. Another lock smith said to use WD-40 which you’re saying won’t work. Can I try this lubricant your recommending after spraying the WD-40?

    • @24hrMrLocksmith
      @24hrMrLocksmith  6 месяцев назад

      @@Bean_Sprout_3 use WD40 and move the key in and out, lots of times.
      If and when it finally turns use a lock lubricate similar to Tri-Flow.
      Note: you may need to rekey your door lock. They wear badly. Ignition too.

  • @aswan5086
    @aswan5086 5 дней назад

    Hi, need help here, I have used the WD40 penetrating oil type on my padlock few days ago, what should I do now? Wash off the padlock? I'm worried it will jam the padlock later on?

    • @24hrMrLocksmith
      @24hrMrLocksmith  4 дня назад

      @@aswan5086 WD40 won’t harm your padlock.

    • @aswan5086
      @aswan5086 4 дня назад +1

      @24hrMrLocksmith I thought the oil type wd40 is gonna cause dust build up, and later on jam the padlock?

    • @24hrMrLocksmith
      @24hrMrLocksmith  4 дня назад

      @ Any “wet” lubricant can attract dust, etc. However, TriFlow works great for me.

  • @alanlim7068
    @alanlim7068 2 года назад

    i knew it with the foam base is the correct thing for locks that maintain the condition, once every year i apply them for maintenance. the foams that protect wear and tear and also numbers of times on open/close , weather condition also protect it

  • @timh7156
    @timh7156 8 месяцев назад +3

    Triflow contains ptfe (trade name Teflon). I don’t think it contains silicone. When you say silicon I think you mean silicone. Silicon is a natural element used in the manufacturing of electronic chips. Silicone is man made material used in lubricants, sealants and breast implants.
    We appreciate your great videos and sharing of your expert tips. Have learned a lot from your experience.

    • @angelobonanno1859
      @angelobonanno1859 4 месяца назад

      silicone is a polymer of silicon so it's technically correct 🤓🤓🤓

    • @gbitpal
      @gbitpal 2 месяца назад

      So is teflon a good lubricant?

  • @ablelock
    @ablelock 2 года назад +1

    Hey Terry I use WD-40 on my service truck for my customers and I use the original for cleaning and servicing the lock and then I lubricate it with the silicone based WD-40 and I have been doing this for a long time it is a real good product and the other thing I like about it is that it is easy for the customer to fine so if they want to buy some to use it on their doors it’s easy to fine I do you just try flow and I do like that product as well but it is harder to find for the customer unless they come into the lock shop to buy it. So I always tell him to look for the yellow top WD-40 that says silicone base on it this way they can get a permanent lube and I tell them where they can get it at the big box stores.

    • @nomadyesmad4875
      @nomadyesmad4875 Год назад

      Will silicone based eventually gum up the lock?

  • @doggy55915
    @doggy55915 2 года назад

    Hiya ..what do you recommend for the ignition lock?

    • @ypcomchic
      @ypcomchic 2 года назад +1

      New ignition. Don’t mess with ignition. Has a small lock piece on it that can “lock” itself while you’re driving if you spray it with wd40 which isn’t good to happen while driving. Be safe.

  • @backyardbasher
    @backyardbasher 11 месяцев назад +1

    "Myth: WD-40 Multi-Use Product is not really a lubricant.
    Fact: While the “W-D” in WD-40 stands for Water Displacement, WD-40 Multi-Use Product is a unique, special blend of lubricants. The product’s formulation also contains anti-corrosion agents and ingredients for penetration, water displacement and soil removal."

  • @eldenl1
    @eldenl1 5 месяцев назад

    I don't know if you still monitor this video, but I just watched a video saying WD40 will attract dirt and make the lock worse over time. They said to use graphite dry lubricant. What are your thoughts on using graphite powder?

    • @24hrMrLocksmith
      @24hrMrLocksmith  5 месяцев назад

      @@eldenl1 Graphite is old school. WD40 is a penetrating liquid. Use Tri-Flow or WD40 Silicone to lubricate your locks.

    • @chefgav1
      @chefgav1 3 месяца назад

      Think your confused WD 40 is a brand name

    • @jacobsebastien3910
      @jacobsebastien3910 3 месяца назад +1

      Graphite is Messy!"

    • @eldenl1
      @eldenl1 3 месяца назад

      @@jacobsebastien3910 my husband told me to rub a drop of gun oil onto the key, wiping off any excess with my finger, so not drippy. Then put it in and out of the lock, and locking and unlocking the mechinism. It worked like a charm. I did this when I first posted the comment about graphite and it still works effortlessly.

  • @colingooch5353
    @colingooch5353 2 года назад

    GT 85 my go to

  • @frankciccone8559
    @frankciccone8559 Год назад

    So, why not Hondas?

    • @doubleitp
      @doubleitp Год назад

      Because the Honda locks fail. Nothing to do with WD40 Silicone. He mentions it at the end of the video.

  • @sapperdeflap
    @sapperdeflap 2 года назад +1

    WD-40 is not a penetrating oil, it's actually a solvent...

    • @doubleitp
      @doubleitp Год назад +1

      This is the Silicone Lubricant. The regular WD40 is "Water Displacing", gets rid of moisture, but does not lubricate.

    • @sapperdeflap
      @sapperdeflap Год назад

      @@doubleitpFunny, because where he points out at 0:23 is in our country(The Netherlands) the WD-40 solvent version in the original blue cannister, and the WD-40 silicon spray is in a gray kind of cannister, and is absolutely not a penetrating oil.

  • @human1513
    @human1513 Год назад

    Spray the lube between the slits on the door hinges so it gets inside to the pin.
    It does no good to rust proof the outside of the hinges.
    I used to see the same happen at auto shops where a lube guy would completely cover the door hinge but get no actual lube into the pins and bushings. 🙄