BEGINNERS GUIDE TO LUBRICATING LOCKS

AFFILIATE LINKS: WD40: amzn.to/3zJFGYN
graphite: amzn.to/3zxJRXw
Lock Saver: amzn.to/3o2CJ34
CAMERA: amzn.to/3nWORT7
24mm prime lens: amzn.to/3CBnKkN
35mm prime lens: amzn.to/39pIShr
50mm prime lens: amzn.to/39uiOBO
85mm prime lens: amzn.to/2XJDqUq
CFAST cards: amzn.to/3CBry5E
SD cards: amzn.to/2XDTvdI\
card reader SD/CFEXPRESS: amzn.to/39qI4sH
card reader SD/CFAST: amzn.to/3hZ1xFv
EDIT SOFTWARE: amzn.to/3hYYSLP
*These are affiliate links which, when you click on them, at no cost to you, will provide the channel with a small commission. In other words, "as an Amazon Associate I earn from qualifying purchases." Your support, should you choose to give it, is greatly appreciated....
PLEASE LIKE AND SUBSCRIBE: / @readiysteadiy
In this episode I go over 3 methods of lock lubrication - one I don't like, one I used to use, and one I use now. I compare WD40 to spray graphite and synthetic lubricant in a DIY beginner's approach. #readiysteadiy #WD40 #Mil-Comm
CHANNEL STATEMENT: This is a channel about my relationship with stuff. We all need to have a better relationship with the stuff in our lives - we have too much of it, and most of it’s junk. If nothing else I hope you take away with you an interest in the stuff in your life - a curiosity for how it’s made - why it’s good or bad - and perhaps even how build new stuff or fix what you’ve got. Having said that - the internet is a terrible place to learn anything. Unless you independently verify what you learn - you’ll never know if it was right or wrong or made up completely…. Unfortunately disinformation is both the currency and the bane of our era. I’m no expert in anything you’ll see here. I don’t want you to think that I am. Through my job I have access to people who are - and I’ve learned from them over the last couple of decades and become someone who is curious about stuff, brave about stuff , and foolish enough to try and make a youtube channel about my relationship with stuff all at the same time.
DISCLAIMER / PLEASE READ: In making this channel I will put more effort into making the content accurate, safe and correct than most - but that doesn’t mean I can’t be wrong. Accordingly I can’t guarantee or warranty any specific outcome for viewers should they attempt something similar to what they see on the channel. I encourage you not to copy projects you see here directly but build on them - discuss them with experts in your life, and make them better - make them work safely for you. We all need to figure out a better way to own stuff - this channel is meant to illustrate my experience with that, promote learning, have some fun, and challenge myself. Working with any tool or on any project can lead to unintended results - including injury and damage to property. Don’t work beyond your capability. In the same way I have to take complete responsibility for the outcome of my endeavours as recorded here, and my own safety and the safety of those around me - you have to do the same….. Use the information here at your own risk. Be safe, have fun, proceed with the appropriate caution for your situation….

[@bronsonschnitzel7493]

Great content. Surprised this channel isn’t a million+ subs!

[@readiysteadiy]

thanks for the kind words - thanks for watching!

[@MrBobsVids]

Thanks for the video, nicely done! I like to use compressed air to blow out any dirt from the lock before lubricating as you showed with dry lubricant.

[@Spudmuffin00]

Thanks for the video. At 4:50 when you're talking about how the spray can kick back at you- take a plastic milk carton lid, punch a hole in the center and put the straw through it. If there's any splashback, it won't hit you. Just an idea.

[@Weaseltube]

Thank you! So much bad advice out there, but you covered all the bases and even added simple demos to illustrate the differences, plus the importance of controlling the flow of the product. And succint! Well done.

[@readiysteadiy]

Thanks so much! Appreciate you watching!

[@ShawnBusick-fp6ln]

PB Blaster. Dry Film with Teflon works very well

[@timgraaff7551]

I've always used WD 40 on lubricating locks, most anything really, I'll try that silicone one next time, Thanks!

[@readiysteadiy]

Thanks for checking out the video!

[@Ikrananka]

What are your thoughts on silicone lubricant sprays? I wondered if the lock saver spray was based on silicone but instead it's based on PTFE particles.

[@readiysteadiy]

Around here most folks use silicone sprays on their plastic shovels to keep the snow from sticking in the winter. Can't say I've ever used it or seen it used in a lock.

[@fredbloggs6080]

How about olive oil PAM? If it gets on your key it smells good.

[@readiysteadiy]

May smell good but I fear it may attract dirt into the lock and keep it there…?

[@fredbloggs6080]

@@readiysteadiy I know, I was sort of kidding--I have used it to lubricate kitchen cabinet hinges and sliding glass door tracks, and on the sliding glass door it does attract a bit of dirt, but it also keeps them in the cabinet doors from squeaking for a couple years. I did apply it to the front door lock, I think, or maybe just the key and put it in and move it around, it but it didn't do much. I didn't have a problem before I lost one of the front door keys and had replacements made--maybe a copy of a copy also, I'm not sure, but they tend get stuck when trying to pull it after locking unless it's positioned just right and wiggled a little--very annoying when you're trying to get out of the house. I just ordered some WD Specialist Dry Lube which will be here Friday. I believe it is the same type lubricant as Lock Saver.