Seen plenty gunked up from wd varnish, sure reapplication of wd is a band aid fix. Wd does make 'dry PTFE' lube which seems promising. Worst I saw was a facility where one maintenance guy used WD-40, the other graphite... That plus pocket lint and grit wore the key pins so much that no keys worked
Its been my experience that WD-40 makes a good cleaner for gunked up locks (dirt and old graphite) I use Houdini as the lubricant. I cant count the many calls I've gotten where a neglected lock just needed some lube. Thanks for the History lesson as well, had no idea what WD-40 stood for.
I’ve been searching for info on this question, with no luck. Maybe it merits its own video? Even if only to say there is no effective way to prevent a lock from icing up if it’s exposed to the elements. Based on what I’ve found, ill just keep my outdoor locks well maintained (clean and dry lubricated) so that when one inevitably ices up I stand a better chance of being able to use it with less effort. Thanks for this video too. Very good info!
Yeah used to be the standard but there are much better options now. Especially if your in a high humidity area, because the humidity will cause it to gunk up and harden. Thanks for watching!
ok i have a floor safe and it has the dial and a key right in the middle ,,forget the name of it right at the moment ,, anyways the key unlocks it just fine but in one certain spot it drags and hard to turn ,,always in just one spot ,,what kind of lube do i use on this ,,, any help will be appreciated ..need to get something done before it stick and stops :(
You might find this interesting but here in the UK there is a brand of Euro cylinder that stresses you only use Graphite powder to keep the lock lubricated. Have a look at the Ultion euro cylinder, see what you think of it. Think a chap called Lock Noob has a video on it for a break down. Ace channel and pretty interesting to hear differences in the US and UK.
What types of lubricants have you seen used in locks? Ask more questions or let us know here in the comments section. Thanks for watching!
Seen plenty gunked up from wd varnish, sure reapplication of wd is a band aid fix. Wd does make 'dry PTFE' lube which seems promising.
Worst I saw was a facility where one maintenance guy used WD-40, the other graphite... That plus pocket lint and grit wore the key pins so much that no keys worked
Its been my experience that WD-40 makes a good cleaner for gunked up locks (dirt and old graphite) I use Houdini as the lubricant. I cant count the many calls I've gotten where a neglected lock just needed some lube. Thanks for the History lesson as well, had no idea what WD-40 stood for.
carby cleaner is better, then use a teflon/lube spray
I use TRI FLOW in the squeeze bottle .. fewer airborne particles also Houdini to flush out.
Nice video, but had to mention that graphite is not a metal. It is just carbon. 👍😊
You are correct sir lol it hardens like metal when compressed.... thank you for watching
Destroyed
Amazing information. Very informational, and kind of cuts in to science 👍
We use Houdini or Fluid Film. Houdini works as a cleaner and lubricant. If we are working on Medeco we use Fluid Film, as per factory recommendation.
Wd40 has a Teflon spray. Really slicks up a lock!
yeah used this stuff today, made a world of difference... now I just need to see how it likes the cold
Excellent.Thank you
Since you're in Texas, you may not deal w/ this much, but what would u suggest to help/prevent locks from getting frozen
I’ve been searching for info on this question, with no luck. Maybe it merits its own video? Even if only to say there is no effective way to prevent a lock from icing up if it’s exposed to the elements.
Based on what I’ve found, ill just keep my outdoor locks well maintained (clean and dry lubricated) so that when one inevitably ices up I stand a better chance of being able to use it with less effort.
Thanks for this video too. Very good info!
We use Houdini
I've used graphite, my go to, but maybe not anymore!
Yeah used to be the standard but there are much better options now. Especially if your in a high humidity area, because the humidity will cause it to gunk up and harden. Thanks for watching!
I use K&Y jelly.....
Is this as flammable as WD40?
Use houdini or LPS-1
ok i have a floor safe and it has the dial and a key right in the middle ,,forget the name of it right at the moment ,, anyways the key unlocks it just fine but in one certain spot it drags and hard to turn ,,always in just one spot ,,what kind of lube do i use on this ,,, any help will be appreciated ..need to get something done before it stick and stops :(
Try White Lithium Grease only a small amount though
TRI FLOW Okay thanks!
Does Triflow contain ptfe which has recently been found to be extremely toxic and really bad for your health and the environment?
I'm definitely using it then.
It is Sherwin-Williams not "Sherman Williams". Sorry I have to correct that : )
You might find this interesting but here in the UK there is a brand of Euro cylinder that stresses you only use Graphite powder to keep the lock lubricated. Have a look at the Ultion euro cylinder, see what you think of it. Think a chap called Lock Noob has a video on it for a break down. Ace channel and pretty interesting to hear differences in the US and UK.
Medeco recommends to use Fluid film in their locks.. I've used it in normal pin tumblers with good results.. Triflow seems like a great product !
Tri-Flow all the way for me here in NY.
wow...never knew that. I live in a retired Titan missile silo..... 8)
Purely for aesthetics, you can't beat that lovely Houdini smell though 🤤
Thanks for tip. Bought Triflo yesterday. It saved my bacon Deadbolt lock at home was frozen. Now moving smoothly 😊
You are correct with using graphite, it clogged the locks up, worse than road grime.
Triflow!
Sherwin, not "Sherman"
Ok luckily did not buy graphite yesterday! Humidity is high here where I live.
you almost lost me when you said graphite is metal :). graphite is carbon dust. dry lube.. but yes it gunks up.
Lithium grease, it will linger and remain consistent.
We use that on safes
Another youtuber said that tri flow gums up his locks. He’s a locksmith I think his name is Wayne
That would be the first “professional” I’ve heard say that
What about a fine oil like sewing machine oil.
Honestly I haven’t heard of it lol
So synthetic grease vs. oil?
Tri-flow - Teflon based lubricant