Land Rover / Range Rover / Jaguar Fuel Filler Cap Strap Replacement Petrol / Diesel
HTML-код
- Опубликовано: 11 сен 2024
- In this video we look at how to change the fuel filler cap retaining strap on the petrol / Diesel fuel cap on your Land Rover / Range Rover / Jaguar etc. These are on our website now :-
www.powerfuluk...
#landrover
#fuelcap
#strap
#PowerfulUK
Sorry for delay ... these are now on the website
www.powerfuluk.com/catalogsearch/result?q=rfc000
Just to say thank you. Informative video. Ordered, delivered quickly, so easy to fit having seen this. All done in 2 mins. :-)
@@davidfletchfletcher Excellent !
Strap broke on F-Type and was looking at full replacement until found this. Perfect replacement and saved a ton of unnecessary waste and expense. Video guide is icing on the cake. Was all very easy and took 5 mins. Thanks guys!
Thanks for confirming it works on the F-Type. I've purchased the same for my F-Type.
Bought one for my Range Rover Evoque and -- with the help of this video -- successfully fitted it. Thank you, gentlemen!
I've just bought one for my 2018 Jaguar XE. It looks like a quality replacement and it took me less than five minutes to remove the old one and fit the new. The part was despatched and delivered in two days. Oh, and the video is very helpful too. Thank you.
Nice one, loads of people need them. Great attitude to sell just the bit we need. Thanks.
Thanks for the video - I watched - I learned - I purchased....
Just swapped mine out, 3 minutes and job jobbed! Great approach to supply the consumable part, rather than binning the whole assembly - well batted guys! 👍
Used one of my trim-pulling tools to separate the filler cap & body - didn't leave a mark.
Yes crazy land rover dont sell this part.
Easy to fit, saves money, and less to landfill! Well done! 👍🏻
Thanks 👍
Thank you, fitted on my Jaguar XF. The extra hole on my existing anchor had a plastic “pin” in it to a 2nd hole.
I’ll be getting one of these for my X-type “Jaaaaaaaag”. Nice one 😀👍
Perfect. I’ll be purchasing one of those straight away 👍👍
Thanks for making this product. I have just done the replacement on my F-Type.
Thankful for these Defender videos! Would love to see one on the air suspension and how it actually works. Especially why it adjusts at various speeds. Thanks!
Thank you so much for the video! Just replaced mine. Super easy 👍🏻
Glad it helped!
Thsnks - a great product - I have just bought one as the one on my 'new' 66 reg D4 hsd virtually perished through.
BUT - interesting point - it is a bit short for the Euro6 D4 as the diesel filler has been moved slightly further away to allow for the AdBlue filler. But Land Rover still fitted the short tether as standard so it's a bit too short to put the fuel cap on the hook and you have to leave it dangling.
So - one with a slightly longer tether would be great for the LR Euro6 vehicles (happy to drive over to you to show you if you like).
I remember my first Disco 1 - no tether - left it at the pump in the first month - dealer gave away a free replacement to millions of us that forgot them - after the first one you were on your own for $30+ if I recall - I havent forgotten mine yet on my current Disco 1
Bought one from the far east. Literally fitted it 20 mins ago but wasn’t happy with the fit (ring was larger and the Christmas tree bit doesn’t sit right). So just ordered one from yourselves. Yours does seem a better fit from the video. PS the extra hole does have a plastic push-pin rivet to further secure and possibly stop it from turning round)
Just ordered one for our 2017 f pace after the cord fell apart yesterday, nice video 👍🏻
Just spotted this video, brilliant. Ordered two & the red aluminium cap cover. Thankyou! Was not going to pay Jag 30 quid+ for a whole new XJ cap.
They have been flying off the shelf...60 sold in 2 days !
The one on my 2013 Defender broke a week ago and, you’re right, I thought I’d have to buy a new cap. Great idea!
I’ll be interested in one for now and one for later if the postage to Australia isn’t too much.
Arrived today and replaced in 5 minutes - top job guys!
Excellent !
Excellent product at a sensible price. I would have hated the waste of money and resources of buying a fuel cap just for the strap. Good video, fitting is very easy and as shown.
Yes we are not going to get rich selling these - but someone needed to do it to save all the caps from landfill !
Great company, great products and videos super helpful for non-mechanics. Keep up the good work!
Hi Simon, another great product, will order one up as a spare. Regards mark
Just got one of these for my 2012 Jaguar XF. Perfect fit, OEM quality and takes about 5mins.
Happy by name .. happy by nature !
Thank you so much. An easy fit on a Jaguar xe.
Great replacement for my e-pace. Well done lads.
Great to hear!
Just bought this works quite well. The old plastic circular part was alot tougher rather than soft like this one. I spose the harder the circular plastic was to allow the filler cap to twist freely. With this soft rubber all of it twists together. Nonetheless does the job!
Thanks for the feedback - I will check this out
Had mine a while and just gotten around to fitting it. Even easier than the video and my 2011 XF did have a little plastic centre pin rivet in the "Mysterious" hole. Great Price and next day Delivery Thanks.
Hi Jeff - thanks for the comments.. these have been selling well !
Perfect, very good online shop
Yes, thanks
Really helpful. Thanks guys!
Our pleasure!
Excellent, simple but an excellent product.
Brilliant! Been looking for this solution for years for my Defender! Assume it fits a Puma?
Brilliant idea-I had a diesel merc and strap perished in a year and snapped.Had to buy a new fuel cap-Pity manufacturers themselves don't do what you've done .
Disco broke recently. I used to think you guys were just cheap after market parts. I was wrong. I am sorry. You have a great enthusiastic approach to your business and a can-do outlook on everything. I will order one of these.
Cheers
Hi Will we started with a focus on accessories and some of them were not the best designs etc... we are now coming out with some new products that are our own design and hopefully you see more cool stuff. We have invested in 3D printing / 3D CAD Design / 3D scanning and this has helped us create some new parts. I am more excited about the products and the business now than ever before.....
Just what i need perfect 👍
Works a treat thanks. Range Rover Evoque
Thanks - we had a couple of people say they do not fit but we have sold 100's and i think the people that say they did not fit did not watch the video so did not split the cap !
@@L663 well it's straightforward and easy to follow, getting the lanyard reattached to the vehicle is hard but with persevering and manipulation it went in, needs to be somewhat tight though. Overall great product, price and video. Thanks.
Purchased one and fitted it to my fl2! Fits a treat!!! No more potential for loosing cap at station😀👍👍
Interesting - we tried on our FL2 and the barbed bit at the end of the rubber lead seems too small for the hole in the FL2 ? we are thinking of 3D printing an adaptor... let us know how you did it ?
@@L663 the barb is to small, i cheated by putting a blob of glue onto the side of the barb and stuck it!
works well for me, only used the smallest amount of glue, easily remove it if i want
@@L663 i would also like to thank you publicly for such a speedy delivery, within 24hr from ordering to post through letterbox, excellent!!!
thank you
@@leesmith3138 We try and get stuff out quickly once its paid for...when having discussions with couriers and Royal Mail i often say to them that i think 1st class next day services should be cheaper than slower ones..... why ? they ask... and i go on to explain that the slower items have been clogging up their warehouses which cost money to run / rent / heat etc.. makes them think !
@@L663 i like your thinking.
Lol, after 5 years of Evoque ownership, this was the only bit to break!
All done, thank you.
Thank you very much.
Now I need one for my R231 Mercedes SL......but I will have to measure and check that tough guy connector...will it fit?? I shall report back! Good work men!!😎😎😎😎
Thanks! Great vid
Glad it helped!
Ordered. Fitted. Nice 👍
These have sold really well for us - we must have saved lots of people from having to buy complete caps and that is a real environmental benefit ! ( and cost saving )
Thank you lve been looking for years on how to fix my one on my VW caddy without losing the lock when all I wanted is a new strap.
Do you think our strap will fit the VW ?
@@L663 I'll let you know when I get it and also check my cap and see how well it will fit.
Superb Service and Value - Thanks
We sold them all in a week ! more coming in soon ..
Just fitted one on my 2012 xf hardest bit is getting the old barb bit out as mine broke next to it, a doddle to fit
Awesome cheers
Thanks - it worked
Great!
Looks to be the identical setup and strap as on my 2012 BMW 750i (assuming the cap diameter is the same) therefore it should fit the F01/F02 series cars as well.
thanks i will look into this
Been annoying me for months this didn’t know you did the strap only !! Ordering today
They are on the website under "spare parts" for your vehicle.. let me know if you cannot find it.
Arrived next day and fitted perfect ! Thanks
Hi Simon, I don't suppose you would have some made up for the L322 as its different to the one you showed here.
Ya I need one for a l322 as well
@@justinsmith6296 me to 09 diesel
And me RR 2010 TDV8
Such timing Simon, the one on my Evoque is nearly in two pieces, I’d have been a little peeved in having to buy a complete unit.
Hi Colin.. here it is
www.powerfuluk.com/vehicles/range-rover-evoque-sport/evoque/spare-parts/range-rover-evoque-fuel-filler-cap-replacement-tether-strap.html
Ordered 👍
Came today, fits perfect. Thanks guys.
Thanks
Welcome
You don't want to die.👊👊
No but it happens to us all !
Great stuff. I need one of those to replace my bu&&£r3d one.
Are they the same size as the Freelander 2 Diesel ? I could put it on my now spare cap as I had to buy the whole cap assy the other day.
Cool i need one for my Jaguar XF u sold out are u making any more and if so when will they be in stock please
Hi - yes these should be here soon - let me check - they are sent in by air so should not be delayed by shipping.
Hi Simon
My L405 fuel flap is not closing when
I push to close, this is a 2012 to 2017 model, what could have gone wrong?
say it again "t-t-t-t-t", i like it :)
Bought a replacement from your eBay store and it sadly only lasted 3 months (5 fuel fills). Allot less than the original which was poor. The strap split completely in 2 and I always put the cap on the holder inside the fuel flap. Any idea why it failed so soon? Many thanks
Hi Sorry to hear this - this is the first fail reported. Happy to send you a free replacement - please contact our customer service team.
@@L663 I must admit, it also surprised me. Will do. Thanks.
@@L663 replacement received today. Thanks so much for sorting this out so quickly. Really excellent service. Many thanks. 👍👍👍
Will that fit a defender fuel cap?
Hi 🙋♂️ very good 😌 and thinking 🤔 for people to save some money 💰 I will order this to keep it as spare. Can you try to get engine cover grommets Land Rover dealer sell complete cover not a separate grommet .
Thanks 🙏
When’s it on the web site?
Got 3 people on jaginfo forum interested 👍
Just got it on
www.powerfuluk.com/vehicles/other-vehicles-accessories/jaguar/jaguar-xf-fuel-filler-cap-replacement-tether-strap.html
@@L663 I believe 5 have bought this now👍
Is it injection molded? Must have been pretty pricey to get the tooling made.
Yes its injection moulded and its a highbrid of rubber and plastic.. but the tooling was actually quite cheap.
Single cavity soft tool?
I’ve literally just got a whole new cap for my Evoque a month a go because the cord snapped! 😩
🤦♀️
Buy a strap and you have a spare cap / saleable cap
www.powerfuluk.com/vehicles/range-rover-evoque-sport/evoque/spare-parts/range-rover-evoque-fuel-filler-cap-replacement-tether-strap.html
Will it fit a Jaguar XF 2014 ?
pretty sure it will - if it does not you can have a refund !
Can you make them for BMW?
Hi, will the Evoque one fit the Freelander 2?
Hi - we tried this - the cap is the same and the round hoop is the same but the tether is a little longer on the Freelander 2 and the hole is also too big in the freelander 2 body so it does not retain the tether securely... we are looking at that.
Are they on the web site to buy yet ????mine broke a few weeks ago
They are on the website under "spare parts" for your vehicle.. let me know if you cannot find it.
Thanks found and ordered
Link no longer works
Has a day passed yet? I've been on the website twice and not found them (said the eager beaver to no one in particular and everyone in general) .....yours, waiting in antici...................pation !!!!
They are there...what car do you have I will send you the link..
Discovery 4
@@danieljohn64 www.powerfuluk.com/vehicles/land-rover/discovery-4/spare-parts/land-rover-discovery-3-4-fuel-filler-cap-replacement-tether-strap.html
@@L663 purchase made!