God bless you for the work you do, Jimmy. I subscribed. I hope Foster gets to impress you even further *when* you bring him your RV, hahaha. Great content, both of you.
I told the you the perfect detailer to reach out to. It would be cool to have buff out Cameron and get her slick to see if you can get a couple more knots with a smooth finish on the plane...FOR SCIENCE
The lug nuts that showed being screwed back on looked to be on backwards but done right on one wheel at least in the after panning shot. Other than that tiny thing, cleaning is totally my jam, especially vehicles. Seeing the attention to detail and pride you take in your work makes me want to deep clean my car again. You've done that car and Jimmy a great service, be proud.
yeaaahh. I kinda scratched my head at that. If you're going to replace the wheels/tires, then spring for some new Acorn lung nuts (can't put those on backwards). ^~^
thinking about it, there's no way this guy who has cleaned thousands of cars doesn't know how to put on lug nuts. He probably put them on backwards to generate comments like this, in order to boost his metrics on engagement.
@@grantf220 You’d think. Or maybe he was just mock putting it on for the camera and they were going to take it back off to clean more. Or he got distracted/has done this before. Bros front left tire fell off on the interstate because the shop didn’t tighten the nuts after doing the brakes*.
Scrolled down for this.. I was already questioning why the car "needed new wheels because it doesn't roll" as if you can't just change those little tires with a tire iron in 20min.. and there's definitely no bearings in the wheels lol
Oooo... you did it again Mr. Foster !😃 What an amazing work ! 👏🏽 👏🏽👏🏽💯💯💯 This should be one of those special moments that should be included in your masterpiece collection! 😄
ooohh good question! I hope they see it. Probably not as much as we might think, considering the fact that Xtreme APC can be diluted at 50:1 and still be more powerful than most APCs on the market. That cleaner is amazing and you can use it for almost anything,
Foster! what a beautiful job man! This one was amazing. True amazing! Fantastic save and fantastic Job! Congrats my friend! I hope to see the RV getting detailed soon! keep showing us wonderful works! Those rims were a serious challenge for the MAD ACID!
Hey Foster, hello from Ocala again. Another great transformation. This episode REALLY highlighted the MAD Acid and Iron Eraser, more than any I have seen. Even though you replaced the wheels, the originals were almost, with a little more work, ready to be primed and painted. I am subscribed to Jimmy's World already, and was wondering why he was in your video. A nice guest appearance, and a great reaction at the end. I also watched the video on his channel about this car. It would be cool to see you take on his nasty motor home, and others have mentioned, perhaps an airplane some day. Great job and looking forward to the next.
Super job as usual! Please correct me, but it appeared from our distant viewpoint, that you put the lug nuts back on the fist wheel backwards? Also wondering why not remove the batteries to get to the bottom of their compartment for cleaning?
I'm obligated by an experience to tell you that you should always use jack stands when lifting something heavier than you can bench press. Also I think you put the lug nuts on backwards. I'm glad this project ended up with you. Recently I purchased your apc and wheel acid. Not sure what jimmy has planned for this but it's in a much better way now
@@golden.lights.twinkle2329 One of my favs is the Fiero, it had door handles and mirrors from Camaro's/Firebirds, brakes from a Chevette and a plethora of other existing parts.
@@MADDETAILING I totally understand that feeling, done that many times. Lol you guys are one of the best detailers on RUclips imo. Btw where are you located I would love to have my car detailed by you guys.
When you see cars this dirty it’s usually safe to assume they won’t be turning on again without a lot of work that nobody will ever do, kind of sad. But happy to see this one being brought back to life.
I have so many questions.... firstly do u get wet while pressure washing and secondly did u just clean the batteries with soap and water... doesnt it damage the battery..
As some people has mentioned you've put your lug nuts backwards (cone part should face the wheel), anyway great job! Also what did You use to remove rust from lug nuts? :D
@@MADDETAILING be careful, Jimmy is one of those “if you give a mouse a cookie, they’re gonna want milk, etc…” kinda of auto collectors. He’ll never have an end to stuff! LOL
hello, nice work, do you want to be even more efficient and pragmatic? in Belgium we call this the Ano Method, in my opinion it is the best method is: first clean at high pressure, then go quickly without going into detail with a blower (the Revolution blower is a killer) to remove the film of water and droplets, then just drop your superb extrem APC! you will see you will have a much deeper result because it will settle on the varnish and clean it in depth. the reason is that the APC must be deposited either on the dirt but in this case it will be effective to soften only the dirt, or you deposit it on the varnish but dry, so no water, otherwise the water will play a role of dilution, the apc or the foam will settle above the water (the density of the water: 997kg/m2, the foam is barely 2kg/m2 or 500 times less dense, the soap will stand above the water and have a sliding effect, like a caress :-) therefore also effective for pre-washing with foamer. the Ano method is truly the best of the best.
Just a heads up for the next vehicle that you clean up and has plastic windows, Do Not rub or wipe with anything. Even a micro fiber towel can scratch the surface and make it yellowed and unable to see through.
looks like the El Car made in Elkhart Indiana in the 1970's, would be interesting upgraded to LiPo batteries but still a very small get-a-bout// well they at least look the same. who knows sometimes products cancelled in one location get rebranded, and built elsewhere too. Same shape.
Heck yes!!!! Amazing save!!
Thanks for the opportunity!
God bless you for the work you do, Jimmy. I subscribed. I hope Foster gets to impress you even further *when* you bring him your RV, hahaha. Great content, both of you.
Can't wait to see that rv cleaned up. Hopefully by M.A.D. detailing.
An airplane next maybe?
I told the you the perfect detailer to reach out to. It would be cool to have buff out Cameron and get her slick to see if you can get a couple more knots with a smooth finish on the plane...FOR SCIENCE
The lug nuts that showed being screwed back on looked to be on backwards but done right on one wheel at least in the after panning shot. Other than that tiny thing, cleaning is totally my jam, especially vehicles. Seeing the attention to detail and pride you take in your work makes me want to deep clean my car again. You've done that car and Jimmy a great service, be proud.
yeaaahh. I kinda scratched my head at that. If you're going to replace the wheels/tires, then spring for some new Acorn lung nuts (can't put those on backwards). ^~^
thinking about it, there's no way this guy who has cleaned thousands of cars doesn't know how to put on lug nuts. He probably put them on backwards to generate comments like this, in order to boost his metrics on engagement.
@@grantf220 You’d think. Or maybe he was just mock putting it on for the camera and they were going to take it back off to clean more. Or he got distracted/has done this before. Bros front left tire fell off on the interstate because the shop didn’t tighten the nuts after doing the brakes*.
Scrolled down for this.. I was already questioning why the car "needed new wheels because it doesn't roll"
as if you can't just change those little tires with a tire iron in 20min.. and there's definitely no bearings in the wheels lol
I just came to question the backwards lug nuts, haha, good eye!
I must say, your apc and pressure washing is my favourite section out off all the detailing channels i watch. Anxiety’s therapy 🙏
Imagine pulling up to the club in that thing
And I was like😮
Lol
😀😀😀
Reminds me of something Ginger Billy made. lol
I don’t go to the club….They be shooting there.
This is one thing I really like about your videos, you show us some really unique vehicles/details, such as this one!
Thank you so much for the support!
❤❤✌️✌️
Oh man! Talk about a blast from the past!!! You did this little one proud, Foster!
old but gold...this is the most detailing wash old car...i love watch it...
✌️✌️❤️❤️
I noticed when you went to put the first wheel on after cleaning lug nuts they were put in backwards. Concave towards wheel. Enjoy your channel! 🙂
Oooo... you did it again Mr. Foster !😃
What an amazing work ! 👏🏽 👏🏽👏🏽💯💯💯
This should be one of those special moments that should be included in your masterpiece collection! 😄
Foster, you get the sweetest vehicles to work on!
Crazy transformation!!! What a cool car!
Curious: how much product do you guys go through in a month?!
ooohh good question! I hope they see it. Probably not as much as we might think, considering the fact that Xtreme APC can be diluted at 50:1 and still be more powerful than most APCs on the market. That cleaner is amazing and you can use it for almost anything,
Just received my full detail bundle and I have to say, excellent products and I’m pretty excited to do a full detail on one of my rig’s!
to me its so satisfying to watch people clean old dirty cars
Foster! what a beautiful job man! This one was amazing. True amazing! Fantastic save and fantastic Job! Congrats my friend! I hope to see the RV getting detailed soon! keep showing us wonderful works! Those rims were a serious challenge for the MAD ACID!
Hey Foster, hello from Ocala again. Another great transformation. This episode REALLY highlighted the MAD Acid and Iron Eraser, more than any I have seen. Even though you replaced the wheels, the originals were almost, with a little more work, ready to be primed and painted. I am subscribed to Jimmy's World already, and was wondering why he was in your video. A nice guest appearance, and a great reaction at the end. I also watched the video on his channel about this car. It would be cool to see you take on his nasty motor home, and others have mentioned, perhaps an airplane some day. Great job and looking forward to the next.
Super job as usual! Please correct me, but it appeared from our distant viewpoint, that you put the lug nuts back on the fist wheel backwards? Also wondering why not remove the batteries to get to the bottom of their compartment for cleaning?
I saw that with the wheel too lol
Hey build a box trailer for that thing would look awesome.
OMG Foster this was amazing!!! Truly loved every minute. I watched again as soon as I finished the first time!!! ❤️❤️
❤️❤️✌️✌️
It's quite satisfying to see that shiny car emerge as the years of grime are stripped away. Well done!
wow !! NICE car !! thank you sir for CLEANING up this car that looks VERY NICE !
I have never seen a car like that before what was its purpose manufacturing a car like that, its an amazing little thing.
✌️✌️❤️❤️
I'm obligated by an experience to tell you that you should always use jack stands when lifting something heavier than you can bench press. Also I think you put the lug nuts on backwards.
I'm glad this project ended up with you. Recently I purchased your apc and wheel acid. Not sure what jimmy has planned for this but it's in a much better way now
❤❤✌️✌️
This was so relaxing I came over from Jimmy's 🌎. Dude you totally killed this and brought this thing back from death!!😂 definitely just subbed brother
I've heard of cars built with 'off the shelf parts', but this car took it to a whole new level.
Citicars were built from scratch using only a few existing parts like lamps and switches.
@@golden.lights.twinkle2329 One of my favs is the Fiero, it had door handles and mirrors from Camaro's/Firebirds, brakes from a Chevette and a plethora of other existing parts.
I grew up in Sebring, I loved these lil guys.
I'm here because of Jimmy. Great transformation, and channel!
I was WONDERING when you would post the entire Jimmy's World citycar wash!
Loved that clean up. Looks new. God bless you guys.
That steamer method is the bomb
me gusto el video, recuperando cosas del pasado
Hello from Jimmy's World. I had to see the transformation of Wedgie in full. Great job. Subscribed! #ClearProp
Really cool to see you clean up such a rare car built during the gas shortages of the 70's.
I recall when these were new. Ya I'm old. Nice work!
Power washing it was a transformation in itself!!!! Looks great! Love it!!
What a mind-blowing, cute car!! Looks good as new when it got detailed!!!
You have to remove the batteries from the battery housing to clean it properly. It’s still filthy in there.
Wow amazing video, its like a Gurgel Itaipu, a eletric car sold on Brazil in 1974
you're a hero keep going
Amazing job Foster that red paint still looks great for not having been washed in 20 years
Subscribed because of jimmy!! I love detail geek… but this is AWESOME!!
The lug nuts are backwards! Great transformation on this one! 👏
Lol it was 3 in the morning when I put them on they are fixed now.
@@MADDETAILING I totally understand that feeling, done that many times. Lol you guys are one of the best detailers on RUclips imo. Btw where are you located I would love to have my car detailed by you guys.
After seeing this on Jimmy's world i just had to see the full detail. Awesome job guy's. You got a new sub from the UK.
I don't know what it is but I love old cars.. I love it.
When you see cars this dirty it’s usually safe to assume they won’t be turning on again without a lot of work that nobody will ever do, kind of sad. But happy to see this one being brought back to life.
*😊Wonderful Work, Big LIKE 10.770👍Full support! Ciao. have a great weekend! 😊👍*
The car I drew in kindergarten 😂
Tapered end of lug goes into the wheel to center it and keep the wheel from riding on the studs.
That turned out awesome! Good job 👍🏻 ❤
So clean
I have so many questions.... firstly do u get wet while pressure washing and secondly did u just clean the batteries with soap and water... doesnt it damage the battery..
What an amazing transformation and a really cool car to top it off
saw you on jimmys world. LOVE your channel!
Great work brother.👍🇺🇸🇺🇸🇺🇸
❤❤✌️✌️
GRAN TRABAJO...SALUDOS DESDE CDMX
As some people has mentioned you've put your lug nuts backwards (cone part should face the wheel), anyway great job! Also what did You use to remove rust from lug nuts? :D
❤❤✌️✌️
Caramba, muito parecido com o Gurgel Itaipú, o primeiro carro brasileiro elétrico.
2nd nice
Why did RUclips delete the comment from someone that got ahead of me by 2 or 3 seconds?
Wait! Jimmy on Mad! A convergence of Two favorite channels!
Jimmy is the man!
@@MADDETAILING be careful, Jimmy is one of those “if you give a mouse a cookie, they’re gonna want milk, etc…” kinda of auto collectors. He’ll never have an end to stuff! LOL
It has all the weight on the rear wheels and a solid front axle on leaf springs!
Ironically making this a prefect gasser drag car!😂
NAH INI BARU MODEL YG BAGUS ....KECIL DAN IMUT MESIN MOBILNYA ADA DI DEPAN DGN POSISI MODEL TIDAK KETINGGALAN
That rv detail would be SICK
Wow, what a difference. Nice job👍
WoW Amazing work
Didn't think many of those cars were still around. Great job.
Wow! Underneath all that crust it was mind
This is the cutest car I’ve ever seen😂😍
Such cool history Awsome video
Hard to imagine why these never became popular.
Can’t wait to see the motorhome!
Hope we get a follow up on the electric city car, curious if he updates/upgrades it
What a cool car I would love to have it
What a unique car. Great job.
Neat little car!
Ролик о том, как помыл, отполировал машину и салон, плюс заменил колеса
It look 10 times better than it did before, great job!
Nice❤
I'm really impressed by how it turned out, great job.
Also, the car reminds me of the Wideon from BeamNG Drive.
❤❤✌️✌️
This car soooo cute🥰🥰
amazing job
Omggg it was manufactured in my city😭 Shoutout SEBRING FLORIDAAAA!!!!
The car looks great after cleaned but it would've been nice to see it runing again .
Wow this car is interesting looking
It's like Jonny Cab from Total Recall 😄
The Challenge Will be the 310 all aluminum aircraft and Jimmys RV lol
It’s tooooo cute! 🧡🧡🧡🧡🧡🧡
Good job mad detailing🔥🔥🔥
hello, nice work, do you want to be even more efficient and pragmatic?
in Belgium we call this the Ano Method, in my opinion it is the best method is: first clean at high pressure, then go quickly without going into detail with a blower (the Revolution blower is a killer) to remove the film of water and droplets, then just drop your superb extrem APC! you will see you will have a much deeper result because it will settle on the varnish and clean it in depth.
the reason is that the APC must be deposited either on the dirt but in this case it will be effective to soften only the dirt, or you deposit it on the varnish but dry, so no water, otherwise the water will play a role of dilution, the apc or the foam will settle above the water (the density of the water: 997kg/m2, the foam is barely 2kg/m2 or 500 times less dense, the soap will stand above the water and have a sliding effect, like a caress :-)
therefore also effective for pre-washing with foamer.
the Ano method is truly the best of the best.
Very good job dear friends
Amazing job!!!
Makes me want to ride a rollercoaster
You found my Dorito that i dropped between my couch thank 😁 😁 😁 😁 👍 👍 👍
Back in the late 70's early 80s, This car was on the price is right quite a few times as a prize giveaway.
Kärcher steam cleaner is by far the best investment I have bought in years
cybertruck going back to its roots, look at the similarity😁
Was one of the car door window fixings, damaged, it looked more stretched out than the left door's window
I want to see them do the rest of the restore
The funny thing is that a car identical to this one, also electric, was launched in Brazil, with the name of Gurgel Itaipu E150 but in 1974
Wish your product was available in stores
Just a heads up for the next vehicle that you clean up and has plastic windows, Do Not rub or wipe with anything. Even a micro fiber towel can scratch the surface and make it yellowed and unable to see through.
looks like the El Car made in Elkhart Indiana in the 1970's, would be interesting upgraded to LiPo batteries but still a very small get-a-bout// well they at least look the same. who knows sometimes products cancelled in one location get rebranded, and built elsewhere too. Same shape.
Que video satisfatório, parabéns pelo trabalho feito.