Replacing The Blower Motor on a 2008- 2013 Nissan Sentra (without removing the dashboard)
HTML-код
- Опубликовано: 1 авг 2019
- If you would like to leave a donation here is a link ...
www.paypal.com/cgi-bin/webscr... Today I'm showing you guys how to remove the Blower motor with out having to remove the dash!
here is a link to the blower motor from amazon
amzn.to/2YBOktG
IF YOU HAVE ANY QUESTIONS JUST ASK!
** If the video was helpful, remember to give it a "thumbs up" and subscribe. **
If you would like to leave a donation here is a link ...
www.paypal.com/cgi-bin/webscr...
Follow me on INSTAGRAM
/ falcons_garage
Twitter.
/ falcons_shop
Garage's Facebook
/ falcons-performance-an...
My Gaming Channel.
/ @falconsgaming
Disclaimer:
Due to factors beyond the control of Falcons Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Falcons Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in my video. Use this information at your own risk. Falcons Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Falcons Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Falcons Garage
#blower #blowermotorremoval #nissan 
Авто/Мото
Thank you nissan for putting the ac blower in the most unconventional place 🤦♂️
Those bastards
Yep im sure they will make it even harder in the future.
Most stupid design EVER!!!!
Lol my daughter blower went out in her 2010 sentra
In the 2009 you have to remove the gas pedal first.
I found out the hard way 2 years ago.
I am a professional and the manufacturer procedure is to remove the entire dashboard. Thanks for posting this video, it saved me time and money today. Happy Fourth of July
Glad it helped
Actually a great video you explained how to remove each part instead of simply telling us that you remove them, good job falcon
Glad it helped
Great video! it took me about 4 hours as the pins were bent on the blower motor, so I had to remove it and adjust the pins and push it back in. 2 local repair shops quoted me $1200-1300+tax for the repair. I spent $20 on the resister and $50 on them motor from Amazon so I saved +$1200. I am sore as hell as I was all over the place to get this motor in and out, but your video was perfect.
I just did this job and took me four hours, 3 hours to take out the blower, and a resistor, 1 hour to put it back. I'm 6'3" and my limbs are too long for this vehicle that is why I took longer, had to adjust myself several times and find the angles. Thank you @Falcon's Garage for the video.
I'm having a problem with my big self too lol
Thank you for making this video.. I just replaced my blower motor in my 2012 sentra with the assistance of your video..
Glad I could help!
Saved yourself Lotz of money too, a shop is telling me $600 to replace blower motor in my 08 sentra
Hi. I replaced the motor for my ac on a 2012 nissan centra with the help of my husband we fixed our ac with the price of just the new motor. We aaved so much money. We did have to be very patient but we did it. Thank you so much for your video and i finally remembered to come back to this video and thank you. Also so other people can know this is a legit video so they can know it works doings it this way.
Good video. Saved me a lot of time. Blower motor resistor is easy to replace this way too
This video helped so much, it took us step by step to replace our daughters ACblower motor ourselves. Great job
Dude!! Thank you so much
Used your video for my Nissan Xtrail 2011, in Australia (steering wheel opposite side)
Thankfully mine wasn’t as difficult as yours, I left pedals on, went in from passenger side
But your little hint on twisting the unit to the left to get it out after removing the bolt was where I was stuck.
I had removed bolt, was wiggling and thinking there is more screws and bolts holding it in.
Once small twist and yeeeeeeehaaaaw!!!
New unit in and done.
Thanks again
You saved me $500 (cheapest quote) now we have air con for the summer!! Merry freaken Xmas to us
Glad I could save you guys some money!
Thanks for the quick video brother. Mine went out today and we have cold cold weather. -30 with windchill. got a motor, filter, and resistor just to save time
Laredo Texas thank you for explaining so good how to take the blower motor I was having problems taking it off God bless you
Victor Martinez thanks for watching
A PLUS for effort mann I know u put all the shit back together too... GOOD JOB MENG
Thank you for this video. I just did this job I’m 36 minutes, I helped out this lady that has been struggling looking for someone to fix this for over a year. Mucho Gracias Por todo que Dios te cuide
me alegra aver alludado
Huge help! Thanks for making this video!
This video helped me getting my kids car done. Thank you very much falcon 👍🏼👍🏼👍🏼
Glad I could help
Thanks for post. Being "big", I found placing a lounge chair up to the doorjam and getting on my back to be best accessing the blower, servo & resistor.
Great tip!
Me gustó, buen video sobre el blower motor 2007 a 2012 de Nissan Sentra.
here we go again !!! Good Job Falcon ...
Thanks!
Great video! Thanks for sharing.
Thanks for uploading this helpful video. I found lots of leaves in mine. Do you know where the air intake is so I can add some type of filter?
Thanks for the video. Just changed my blower motor
Glad it helped
Thank you ..ser you save my life
Thank you very much Mr Falcon keep it up amigo!
Dude! Thanks for the video! Saved me $800
Thank you man! I'm about to tackle this job!
You got this!
What were they thinking with the placement of the blower motor?? Horrible design.
Thank you very much. Good clear explanation.
Glad it was helpful!
Very nice explanation and information, blessings
VIDEO WAS RIGHT ON. THANK YOU
Glad it helped
Super dope video brotha!!! Saved us hella time!!!
Glad to hear it!
This video helped a ton! Thank you!
Glad it helped!
Thanks you saved me hours it calls for 4.7hrs
Awesome video really helped out. 👍
Glad it helped!
Solo por ese video tan bien esplicado ya me suscribi 👌👌👌👌
gracias
Thanks, this helped, it was a bitch but saved money. 2 hours without experience.
So i fixed my AC recently with this video .thanks for your help. But something bizarre happened after. My physical key will not unlock the door or the truck. Luckily it works fine in the ignition. Is it possible i tripped some sort of anti theft feature?
You gained: +1 sub, +1 like, +1comment!
Thank you. After watching this video I completed the job in 1 hr 15 mins.
Glad it helped
I cant seem to get the 3 wire plugs off the box. Can you tell me how to unclip them or pull them off, please?
Wow - Thankyou. Bought the car used thinking the blower motor would be simple fix as most of them are. Boy was I wrong
did you have to reflash or program the computer module that you removed to get to the blower? A local shop where I live said that the computer needed to be reflashed or programed after reinstallation.
NO, there is no need to reflash anything when doing this particular job.
And never go to that shop again lol
hey thanks for making this video, i drive a Nissan sylphy 2013 (sentra) can any year blower motor use to replace the one that is bad
dont think so .. you need you specific part number
Thank you for the info! Are you in Florida?
Nissan once again not thinking of the diy crew 😩 thanks for the video
Any time!
So should I replace the resistor first and then the blower motor if that doesn’t work?
you should test the blower motor first, because its usually easier to test
I did this all, but now my cruise control will no longer set. Any suggestions?
Hello buddy. My blower motor is working but making a racket with no air coming through the vents. Do you think the blend door is stuck??
probably or a bad actuator motor
@@FalconsGarage thanks for the reply. But fiquired it out. Blower motor had debris packed full in it
I’m here trying to learn more about cars n stuff!
Edit: I’m not a car kind of person, but if falcon is here, I’m here!
☺
@@FalconsGarage po6420 2010 Nissan sentra?
Replaced resistor and blower motor and it’s still not working. Relays are good as wel as fuses. Made sure everything was plugged in correctly etc. Any ideas of what else could be wrong falcon?
I'm not a mechanic but only other thing I can think of is a bad connector somewhere. Or I believe switches itself can go bad too
Check out the control panel if fuse and relay good blower motor is good wiring is good then control panel is most likely place to check next. hopefully your testing these parts properly and not just throwing sh t at the wall and seeing if it will stick!
I'm having the same problem on a 07 Nissan Sentra S. I'm pretty sure you won't tell me, but how much did you charge the customer for this job? Need to know cause my backyard mechanic is going to do the same job on my car, thanks for the video. Any feedback appreciated.
this was my moms car .. so no charge .. but this is about 1-1.5 hours of labor.. so depending what the labor rate is were you live .. in texas average hour rate for a mechanic is $90 .. i think
What year is this Nissan
Fix my Sentra.
6 dealerships and 4 shops can’t tell me what’s wrong with mine.
So the nissan sentra 2011 heating is not turning on at all, that should be a blower?
if there is NO AIR FLOW .. yes it could be the blower or resister
Hi falcon garage, so I replaced the blower in nissan sentra 2011 but still not turning on? Should it be the resistor? Because the Climate control buttons are not turning on either
My sentra is a 2010 is my blow motor in the same spot?
yes
Damn mouse living in my blower pulled all kinds of insulation in there. Have to remove it to clean it out... I'd love to know where exactly outside air is pulled in so i can put a stainless mesh over it...
The first part is actually hilarious to me.
You think it’s here? No.
Here? Nope.
Maybe here? Guess again.
Oh surprise. It’s here.
Great job Nissan 😂
it happens
2013 Nissan Sentra 1.8 the blower motor is on the passenger side. Take the glove box out and its on the side above where the cabin filter goes.
Is this the redesign to where you take the glove box out, and literally reach up, twist-release, and easily pull the blower motor out? I was wondering if the 2013 model is the year they changed over to the much easier way.
Blower motors just wear out constantly, especially if you keep your car for the long haul. It's not uncommon for a car to go through 2-3 blower motors in its lifetime. The last thing you want to deal with is having to spend hours removing pedals and tearing apart a dash every time you have to replace one. *L*
@@missioncodez Yes the Nissan Sentra 2013 1.8 was right there on the side of the glove box. It had 3 screws and it wasn't twisted in there you just pull it out. The after market didn't have any screws in it but I did have to twist it to lock it in.
@@rob5754 Thank you! I was looking for a(nother) used Sentra, but after seeing this mess, I have excluded the 2007-2012 models because blower motors go out all the time on most cars, especially Sentras that you keep for several hundred thousand miles. I don't need to be taking gas and brake pedals out every time I need to replace the blower motor. My current Sentra (2006) is at 340,000 miles and has been through three blower motors already.
How much roughly is a a good price for this job? I was gonna do it myself but then I saw how much you have to remove
i would say about 2 hours worth
After tearing everything out I now cannot turn my key in my ignition. Steering wheel is unlocked too. Ive tried turning it every direction. Never had this problem before. Anybody have any Idea why this might happen?
I'm having problems putting back the blower. I can not get the screw hole to align with the hole where it should go.
maybe grab a mirror and try to see were it is
@@FalconsGarage Thanks for replying, I can see it. It does not fall into place. The screw hole is like a couple of inches left of where it sits. But I can not twist it.
@@FalconsGarage It's the new motor. The tolerance on the parts is crappy. I filed the edges and I was able to install it. Thanks!
My daughter's blower motor just went out, it has been squealing for a while. Not going to be fun when it's 115F this weekend!
good luck
Where is your shop located ?
central texas
Falcon's Garage I’m in Dallas and I need this service on my Sentra. Auto repair shop wants to charge me 1000 in labor plus parts... 😭
@@Yyrdfhjlplnvxsserujbg7 I am located in Fort Worth and can do the job for you at my shop if you still need it done
Cat Man Games what price ?
@@Yyrdfhjlplnvxsserujbg7 I think you should try it with his guide yourself that’s robbery
I hope to GOD its just a bad fuse or ac clutch . About to diagnose my sentra tomorrow's
This is ridiculous, especially since blower motors go out all the time on Sentras. If you own the car for several hundred thousand miles, you'll most likely be putting in at least a couple of these, probably more.
I'm about to replace the blower on my wife's car AGAIN.
I have a used 2016 Sentra Sr and the thing has been a pain in my ass ever since I bought it. Tire pressure is always randomly low on a tire or two...check engine light constantly going off for no reason then disappears on its own...car would randomly refuse to accelerate..and now this, a loud noise when I turn on the fan. Not surprised the blower is in the most inconvenient spot possible.
Gonna ditch this car as soon as I can and never get another Nissan again.
Nissans are usually pretty good cars .. good luck with your next car!
Do all a favor.make a full video show how you struggled
people dont/wont sit thought a 1hr video
2013 Nissan Sentra SV, take out the glove box, no harder than changing out a headlight on most modern vehicles. I tried to video, but couldn't make it work on my phone.
Can’t get the blower motor back in
use a mirror to try to see
I just did this took a hr and a half but now my brakes aren’t disengaging, idk
you loosed the sensor at the top of the brake pedal. Just tighten it back up
Good video, but like you said. You could have went into deeper details
some people also say i talk too much LOL
My mom has a 2013 nissan sentra sv and I done everything this video said and once i got everything out nothing is like this guy says so I put it all back and simply dropped the glove compartment and BAM! There it was the blower motor is on the passenger side this video is false so if your reading this please don't make the same mistake I did and do what this guy says. What he's working on can't be a 2013 nissan sentra
Nissan Nissan why why why
Yes I will need extra help
I can align the bolt again 😢
patience is key
@@FalconsGarage thanks bro I did with a vice grip.
Crap I don’t know if I want to try this.
just needs patience
Estas loco yo solo quite el pedal d3l freno y aceleración y ya salio tanto trabajo que haces por gusto
por lo visto NO viste el video .. jajaja
A A mechanic charge me 300 bucks for labor to do this
Loganccbcc that’s around the same amount I was quoted today.
Any work done at a mechanic shop $200 on up
That sounds about right for labor lol. $100/hr
True
You should’ve warned the people to check their fuses first.
Taking apart the blower without checking the fuses is a horrible way to start.
Good video though.
this is not a diagnostic video, its a how to replace video
@@FalconsGarage
Replacing requires a full diagnostic.
Fuses come first.
Many of your viewers come to your video for a blower motor malfunction.
You’re telling them to replace it instead of checking the fuses first.
@@wordsoffire2416 once again. Title is how to replace not how to check or how to diagnose.
TNX FOR VIDEO,,BUT HONESTLY WHT THE FK WAS NISSAN THINKING,,I KNOW THEY HAVE SMALL PEOPLE WITH SMALL HANDS,,,BUT CHINGADO,,,THIS RIDICULES,,,,,,,,,,,,,,
LOL
Ridiculous 🙄🙄🙄
I hate automotive designers! Everyone needs to have their head removed from their asses or work in the industry for a few years to see the error of their ways.
Never buy a Nissan again,
All cars have their issues to their specific model and brand. 🤷♂️🤷♂️
You don’t have to remove any of that. Lol. What a mess!
exacly the point of the video ...