Thanks for sharing this video and information I'm 75 years young Retired 3D. , just beginning my journey into Robotics. I appreciate your efforts in exploring the combination of 3D printing and robotic car. Really like your design. Especially the 2 segments of base platform maximum car frame even with smaller 3D printer surfaces. Just discovered your channel today clicked 👍👍👍👍👍👍👍👍 & subscribed.
Nice start. It's a pure drift car without a diff and suspension, but for a first prototype its pretty awesome. I am curios: do you plan on conquering the air too? I am thinking about printing a quadrocpter... but this is a thing thats not that easy to operate legally in germany.
I’m planing to make rc car first then maybe boat and the last destination is quadcopter :)) it’s take a lot of time to learn and design it but anyway it’s great journey ;)
i see a lot of issues with this build. to start you will want to use a metal gear servo with servo saver! those cheap micro's with plastic gears break too easy. trust me i know! then for better performance. you will need to beef up the steering system! loose the slop and that wire thing used for a tie rod. for ideas on what works. just look at some hobby grade cars. you will see a lot of things that help make them perform at high speed!
hey i noticed ur 3d printed and its really REALLY out of tune u may wanna consider like cleaning everything up and greasing it back up also i think ur z axis screw is bent because of the artifacts so check for that and also you will have to tune ur flow rate and maybe even pid tune it. and you should use more motors and maybe use herringbone gears as they are better than spur gears and less noisy and maybe add suspension to it
Check out another 3d printec rc car : ruclips.net/video/fH-yQ6VfaQY/видео.htmlsi=UqrjrvzhdFOZpVur
Thanks for sharing this video and information I'm 75 years young Retired 3D. , just beginning my journey into Robotics. I appreciate your efforts in exploring the combination of 3D printing and robotic car. Really like your design. Especially the 2 segments of base platform maximum car frame even with smaller 3D printer surfaces.
Just discovered your channel today clicked 👍👍👍👍👍👍👍👍 & subscribed.
Very nice!!! But I think the front wheels turned out a little too loose, lol! But it's a nice project!
I love it's speed, 3d printing & finishing is also very nice. Good Looking, keep it up my friend.
Thanks bro
@@LeeCuriosity it's OK bro
Did you have a video on how to design it?
My friend, would it be possible to put a shell on it
Of a car so that it would look normal
Thanks sir ! What do you mean a shell… you mean the body kit ?
@@LeeCuriosity yes like a actual car model printed or put on top of it
@@LeeCuriosity so when it runs it looks like a actual car
@@complimated actually the design process takes a lot of time. But I will make it in the future
Bro, I too am trying to print one of these, but I am wondering, instead of a differential, can't I just keep 2 seperate motors for each wheel?
Yes you can , but you need another esc for that
@@LeeCuriosity Don't worry... I have 7 😈
how many of the product in the link should i order for the wheels
You mean the hardware or 3d printed parts
Nice start. It's a pure drift car without a diff and suspension, but for a first prototype its pretty awesome. I am curios: do you plan on conquering the air too? I am thinking about printing a quadrocpter... but this is a thing thats not that easy to operate legally in germany.
I’m planing to make rc car first then maybe boat and the last destination is quadcopter :)) it’s take a lot of time to learn and design it but anyway it’s great journey ;)
Hi! I also made a machine and used the same motor, but it gets very hot. Tell me, does your motor also get very hot?
What's the cost of making?
It would be about 35-50$
@@LeeCuriosity where did you get this number? Adding up all the links ends up being like $150 because of amazon upcharging
@@SemiCollin I think he didn't include Transmitter, receiver, brushless motor, ESC and that giant LIPO.... That would "inflate" a LOT the cost...
U need a differential, suspension, and your steering geometry is not ideal. But it's a great build nevertheless 👌
Thanks.
i see a lot of issues with this build. to start you will want to use a metal gear servo with servo saver! those cheap micro's with plastic gears break too easy. trust me i know! then for better performance. you will need to beef up the steering system! loose the slop and that wire thing used for a tie rod. for ideas on what works. just look at some hobby grade cars. you will see a lot of things that help make them perform at high speed!
Can you make an rc lambo aventador on 1/4 scale and do you have any tips to design it?
Bro battery volte
The Cults 3D link looks to be mangled.
I've did the 444th like
Thanks bro 😎
Your 3d printer and rc car look like something from scrap mechanic
hey i noticed ur 3d printed and its really REALLY out of tune u may wanna consider like cleaning everything up and greasing it back up also i think ur z axis screw is bent because of the artifacts so check for that and also you will have to tune ur flow rate and maybe even pid tune it.
and you should use more motors and maybe use herringbone gears as they are better than spur gears and less noisy and maybe add suspension to it
I'm remaking it with a lot of upgrades :)) but maybe I will public it next month
@@LeeCuriosity where is it