I'm honestly surprised you didn't add a small spring to the trigger mechanism. So it's default state is closed, all you'd have to do is pull the trigger, to let a marshmallow through and then let go of it and it'll close on its own. Either way, awesome video
that wouldn't work because the marshmallows would expand and then they could get very hard to get out or get stuck along with bad smoke that could go up to your mouth.
What if you made some sort of compressed air system and some receiver and barrel overlays. Maybe even try making separate capped magazines for fast reloads and easy storage without fear of spilling. (As in the part of the magazine that goes into the gun has a spring loaded covering so it remains closed when stored)
Add some sort of revolver mechanism so you could quickly change mags; also add a nozzle to the air input since now it doesn’t need to fit a marshmallow
The problem with that would be that your brother would be divided along those for girls and you would have nowhere near as much power as you would have just the one
Made my own variety of marshmallow guns for my friends after they sent me layouts and for the clips I had an idea that actually worked really well: put the clip facing downwards so that you just tip it up and forward a little. This had 28/30 successful shots. Also I used 1/2 pvc and it worked very well because every marshmallow fit perfectly into it.
And now for the ultimate marshmallow gun: add a laser, a scope, a flashlight, gripped handles, bayonet, air compressor, a drum magazine and a suppressor
I would personally add a screen mesh right before the marshmallows drop down just so there's no marshmallows coming to your face when you're taking your breath in
Or a one way valve that does the same but does not really block much air. Or I suppose you could just put a small piece of the coat hanger wire through the middle of the pipe to accomplish the same thing
Might've already been said.. But I would flip around the trigger mechanism so when you pull it the marshmellow would drop, instead of pushing on it, to better emulate an actual gun. Really cool build!
I would make a air compressor take control of your breathing then maybe have a funnel off marsh mellows fill it up while its being hold on by a stand for the gun for a fully auto marshmallow gun
Add a funnel at the top and put all the marshmellos in it so u never have to reload and put on cap on it so no marshmellos fall out when ur battling ur firends
Yah grant is still in the intros and helps a bit but the reason that Nate is there instead of grant is grant has a child and wife so until then Nate is here to run king of random
Find a way to spring feed the marshmallows w/o crushing them, or tilt the mag port 45 degrees to allow for larger mags that don't block your view. Secondly, attach a Can O' Air to the mouth port and, possibly, make a trigger system that goes to your other grip to allow for mouthless automatic fire
Yes, if you make the key fits and touches the lock with every ridge then pretty much. There’s actually a video on them copying a key sanding it down and using it
if you reverse the T piece with the trigger it act as a normal trigger, so when you pull it towards you it puts marsmellows in. you could also make a bottom loaded barrel with a spring in the mag so you can put a sight or scope on the top
Id say make a giant magazine that is tall and wide, maybe basketball size? That could be a giant funnel of some sort, and then have a compressor so it is a fully automatic marshmellow gun!
I'm honestly surprised you didn't add a small spring to the trigger mechanism. So it's default state is closed, all you'd have to do is pull the trigger, to let a marshmallow through and then let go of it and it'll close on its own. Either way, awesome video
Yeah a i was wondering if he would add a rubber band
Also it is a push trigger not a pull trigger??
That’s exactly what I was thinking
And turn the trigger section around so he's pulling on the trigger instead of pushing.
Was jsut about to comment the same thing
Soak the marshmallow in lamp oil/gasoline and attach a blowtorch at he end of the barrel. Now you have an incindiary marshmallow gun!!!!
no better yet smores gun\
yeah now where talking
that wouldn't work because the marshmallows would expand and then they could get very hard to get out or get stuck along with bad smoke that could go up to your mouth.
yeeeeeeeeeeeeeet
Freezin Frenzy they are lit as they leave the tube so they expand in the air
Vagatavg Vainglory OMG
If you poke a hole in a can of flex seal, will it seal itself?!
Mitch Paulsen depends if you let the seal leak out, if yes then you will get a light seal vice versa
AIR Gaming jgj
Reminds me of a paintball gun
I don’t know
...
Try making it with paint ball tank or air compressor power
Charles Long omg I was just thinking that. That would be so coo,
Charles Long that would be so cool and he should add a scope
Cool idea. May also be cool to see him scavenge a nerf gun and make a spring operated version
Charles Long i was thinking the same thing also put a paintball hopper on it!
I was wondering how to hook up a co2 bottle!
What if you made some sort of compressed air system and some receiver and barrel overlays. Maybe even try making separate capped magazines for fast reloads and easy storage without fear of spilling. (As in the part of the magazine that goes into the gun has a spring loaded covering so it remains closed when stored)
that is what i was thinking
Lieutenant that are some cool ideas, and I also had the idea of the spring loaded gun
I also think that a rubber band on the stopping mechanism would be cool and having it on the other side so u pull it instead of pushing it
He already has a multi mag system
@Unofficial Rap lion
I love when you make videos and projects like this. Can you please make more like this?
Make the firing mechanism spring loaded and also turn the trigger around so that instead of pulling, push.
GarbyGas he should have put a rubberband
Don't think you could spring-load marshmallows since they are soft, but the reversing the trigger mechanism could change the pull/push direction
Just flip the trigger mechanism around
I thought of that too but I believe the trigger would then be too far away from the handle to use effectively.
@@tinybluepanda1319 That was what I thought but the trigger design would need to be changed so it's not so far away from the handle.
combine it with the flamethrower and compressed air to make firey marshmallows
True
That would be the next next level
Marshmallow shooter/cooker!!
Yes and use it to make smores
You are a frickink GENIUS.
Add some sort of revolver mechanism so you could quickly change mags; also add a nozzle to the air input since now it doesn’t need to fit a marshmallow
Next project - air compressed marshmallow gun?
Or a marshmallow shotgun or even better an air compressed marshmallow shotgun
YES
I think he should make a marshmallow gun exo skeleton that has air compressed marshmallow shotguns and fully automatic marshmallow gun too
Totally do that
Yes
The king of random- turning food into projectiles since 2018
NeonGaming since 2010*
Come on.
Since adventure time came out
Skeletun .-. rip adventure time
co2 marshmallow gun
Joseph Pedersen hpa
The next level of this should be that gun but with a compressed air tank so you can fire even more quickly
i had the same idea XD nice thinking
Same with me
It should also have a gallon sized marshmallow container.
true XD
maybe adding a compressed air tank instead of blowing inside would be more effective :D as well as a trigger to open/close the tank
You put the trigger on backwards and all you had to do to fix it was turn around the piece :P
UnknownEvil yea you had to push is to open which is not right
No because then it would be to far forward
lever action full auto marshmello shotgun
You should make a twin marshmallow shooter with two barrels maybe four
The problem with that would be that your brother would be divided along those for girls and you would have nowhere near as much power as you would have just the one
Jonathon is it bad that I dont know that refernence...
Make an air compressor powered minigun marshmallow shooter
How's Peggy?
Try adding a vacuum or compressed air to the marshmallow gun so that it can fire on its own
A fan isn't powerful enough to push them you'd need to add compressed air like a Airsoft or paintball gun
cheeki breeki man the III I was thinking that you may need something that constantly creates airflow as compressed air will run out, possibly a vacuum
It us going to be hard to shoot a single shot
khaled jamal you could keep the same drop mechanism and just remove the requirement to blow down the PVc
Do it
Try putting a Tesla coil in the vacume chamber. Or try putting a small spinning genarator in the chamber and see how long it can spin.
Get some of your old expiramental and stuff and mix it up and try to improve or fuse them together etc
You should make a Marshmello gun that you can add a co2 tank on to make it shoot further and harder like if you agree
Made my own variety of marshmallow guns for my friends after they sent me layouts and for the clips I had an idea that actually worked really well: put the clip facing downwards so that you just tip it up and forward a little. This had 28/30 successful shots. Also I used 1/2 pvc and it worked very well because every marshmallow fit perfectly into it.
And now for the ultimate marshmallow gun: add a laser, a scope, a flashlight, gripped handles, bayonet, air compressor, a drum magazine and a suppressor
Bayonet?........ Why?
@@Scrapio12 to.. ehhh... roast your marshmallow above the fire
@@neroromanempire947 and how would that work on a marshmallow gun
Suppressor ain't needed, maybe a flash hider lol, and drum magazine? What 😂
Don't you think that's a little much?
I love the Build, Camera shots and Edits
They are all so cool
You should make one with a fillable pressure chamber like an air cannon but make it semi automatic. I’ve always wanted to see how to do that
Woahwoahwoah. That's not TKOR. There's no black gloves excuse me
xD
Is that racist
Don't tell grant
I know this is sarcasm but he needed some finger dexterity for this project
Are you trying to get a like from tkor?
What happens when you put whiteout in liquid nitrogen?
Thanks for working so sincerely on these projects, Nate. You're the best!
I would personally add a screen mesh right before the marshmallows drop down just so there's no marshmallows coming to your face when you're taking your breath in
Depending on the mesh screen, it might slow the marshmallow down.
GENIUS
Or a one way valve that does the same but does not really block much air. Or I suppose you could just put a small piece of the coat hanger wire through the middle of the pipe to accomplish the same thing
Marshmallow revolver powered by primers or CO2 capsule.
2:19 to 2:26 was the best part of the video😂😂😂
Add a Red dot sight or a Holographic to it !
What about a x15 scope? Or a x6?
put extended mags and a suppressor on while your at it, don't forget to equip sleight of hand and scavenger
bennn and fast hands
Better watch it now before it gets taken off RUclips
Lol
ha ha
😂
Dude! This is an amazing trick to make it automatic! WOW
Make it into a double barrel marshmallow shotgun
MyNameIs Foxxy 14th
Or add a c02 tank
Yeah
LOL FORTNITE❤💎💘
This isn't fortnite
LOL XD
Please make a video on nitinol .....memory metal
KERALA PSC HELPER Yeaaaaaa
Expensive af
attach a portable air compressor or something to take away the manual puff of air
**No Marshmallows Were Harmed In The Making Of This Video**
He meant marshmellos
Not funny😑😐
It is marshmallow
**PVC WAS harmed in the making of this video**
Except all the marsh -mello- mallows that we’re harmed in the making of this video
C'mon. We need a railgun. No little launchers. We need a big launcher.
Tried making one...kept welding the projectile to the rails....quit
Might've already been said.. But I would flip around the trigger mechanism so when you pull it the marshmellow would drop, instead of pushing on it, to better emulate an actual gun. Really cool build!
I mean if you want to take it to the next level... make it a heavy duty blow dart gun!
Or a self operated paintball gun
or make it possible to place multiple magazines at once in there and use a small air pump as the trigger instead of blowing out your lungs
Make a marshmallow gun that uses pressure from a vaccine or a pressure chamber
he did! search it on youtube, he built one about 3 years ago
Dropping The L's marshmallow mini gun
Now that I’ve seen the dinosaur, I can’t unsee it
lol
I agree comrade
I saw these at a craft fair made from 2inch PVC rather than 1 1/2inch
Marshmallow minigun!!! Or a fire propelled marshmallow shooter
I always love this videos and enjoy watching them
Imagine just going to school and somebody just shoots spitballs at you with this
Could you try to make a secret storage compartment inside of a door?
Kipkay done this already lol
@@KXQ he did not do a door
Oh of course a door is so thick right?
search kipkay secret door compartment
*NOW , THIS IS EPIC!!*
Nate is a straight-up child
Use METAL instead of pvc and shoot FIREBALLS
Γεια σου ρε Θανάση!😂😂
That would be dope. Like alcohol absorbed water beads.
@@georgekotronakis903 omg yes
Awesome idea?
Hopefully it’s possible
I would make a air compressor take control of your breathing then maybe have a funnel off marsh mellows fill it up while its being hold on by a stand for the gun for a fully auto marshmallow gun
Like a turret so all you have to do is aim?
Yes
This guy is the mobster of marshmallow guns XD he wants a Tommy gun XD
Nate: " it looks like a braceosaurus (i cant spell) me: recalls asdfmovie "it is a stegosaurus"
Put a spring behind the dowel rod
I wonder how many marshmallow he ate during this
He is a vegan
The Tenome he totally did not cook and eat steak
@@aa01blue38 it was a vegan steak
With that body I'm guessing none
I think a better question: How many did he inhale?
What your should do is make a stand for the marshmallow gun
I would have flipped the trigger around and added a rubber band.
Oh yeah, me too I understand.
Can you shoot marshmallows at Marshmello?
Should be tested ( ͡° ͜ʖ ͡°)
I just realised... the spellings are different
Ye
Yes
The one made "alone"?
Braceasoras? I love it. Roar 🐯
If i would take it to the next level..... I would add an automatic blower so you dont have to blow on it
Add a funnel at the top and put all the marshmellos in it so u never have to reload and put on cap on it so no marshmellos fall out when ur battling ur firends
If you put a paintball loader on top you could have a bag of marshmallows and you will have to reload less!! LOVE THE VIDEOS LOVE YOU ALL!!! ☺️
A marshmallow gun to surpass metal gear
I like this guy and all but I miss when it was just grant
Oof
Yah grant is still in the intros and helps a bit but the reason that Nate is there instead of grant is grant has a child and wife so until then Nate is here to run king of random
I started watching after this grant guy, this guy is the only one I know and love
Same
Fr
Find a way to spring feed the marshmallows w/o crushing them, or tilt the mag port 45 degrees to allow for larger mags that don't block your view. Secondly, attach a Can O' Air to the mouth port and, possibly, make a trigger system that goes to your other grip to allow for mouthless automatic fire
I have a feeling he Ate a couple....
Who wouldn't
Who wouldn't is the better question.
Courtlyn Blanchette sane here
__Ablysent __ are they married?
@@emilegreenleaf1984 h
Attach a mini air compressor to it so is faster.
Industrial for long sessions
Air compressor and giant magazine = endless fun!
Extract Na and Cl from molten salt
Using electricity 🙇
You should add an air compreser
It would be soo cool if u Upgraded it into a flammable marshmallow gun.
Mattey Boy no
Can you make a marshmallow shotgun?
I would modify this trigger mechanism to add a shotgun loading mechanism/foregrip.
Sorry I accidentally posted a comment like this I will take it down
DarkStrike130 Oh it's fine, no worries.
Can you copy the key for a lock?
AlSah Him yes you can
AlSah Him 22nd
Yes
yup
Yes, if you make the key fits and touches the lock with every ridge then pretty much. There’s actually a video on them copying a key sanding it down and using it
Make a hopper style magazine using larger PVC so it can hold a ton of marshmallows
Deric Hensel this already is a hopper
Please do this and make a Mega clip/mag and have a battle :)
You should build a bagpipe with a rubber glove and some pipes!
Did you know that in Dutch, bagpipe is doedelzak, roughly translated to doodlesack
+Ja Wot Did you know that in italian, bagpipe is cornamusa, roughly translated to bagpipe.
use the marshmallow launcher but use the homemade darts and shoot stuff.:)
instead of you blowing into it maybe use some pressurised gas. like a marshmallow paintball gun
Have a see through area to see the marshmallow traveling 😀😀😀😀😀😀😀😀😀😀
if you reverse the T piece with the trigger it act as a normal trigger, so when you pull it towards you it puts marsmellows in.
you could also make a bottom loaded barrel with a spring in the mag so you can put a sight or scope on the top
Can you try building a railgun?
YAAAAAAAAAAAAAAAAAAAAAASSSSSSSS
That would me sick
The hacksmith already did that
penguin 23 so?
I wanted to say something like "thats more like a hacksmith topic" but you've already done that
You should add a drum magazine to it.
Imagine that, a marshmallow drumbgun. Now ya need a blue slushie.
How are we gonna make a drum mag
I would put the semi automatic reloading thing as a panel above the barrol for more reality like look but *this is awesome*!!!
You should have a lighter or something like that and when the marshmallows land from the tube, the get ignited for a flame marshmallow gun
Brilliant!
Ye it wont work the marshmallow should be slow in order for it to catch on fire..
46 views,45 likesThat's the way to go
There not enough obsurity when the ratios match
But that's majority
Also sometimes youtube wont pick up views on a suddun infux of views
Oh...
Try making one with compressed air and see if it can punch a hole through or leave a mark on certain targets or if it will just bounce off harmlessly.
I would slap an acog on it so I can spawn peak
ItzXeno R.I.P. Jäger
Can you please boil fog juice liquid
That's just how fog machines work
Thiz video is much more like the traditional videos, I like it
THANK YOU for saying magazine not clip 🙏🙏👍👍
Beat the notification. How RUclips?
Your friends: "Lets have a marshmallow gun fight"
You bring your semi automatic marshmallow gun
Can u plz try boiling paint
Have fun
He did basically with the white out
Make a shotgun marshmallow shooter.
Id say make a giant magazine that is tall and wide, maybe basketball size? That could be a giant funnel of some sort, and then have a compressor so it is a fully automatic marshmellow gun!
why not curve the magazine so it can hold even more marshmallows?
Then it wont drop they should have used like a paint ball holder
Make it shoot without blowing
make it shoot real bullets
Next you should do a potato minigun. Or a potato automatic gun of some sort. Either one
yo! i finally caught a vid! love it!
also first like and 5th or 4th view!
OutaTime BTTF fan 20th
Or just eat the marshmallows and not make the gun. Isn't that better guys
This man is living in 3018
I would make it where the marshmallows can be stored in the shoulder reat
Attach a c02 tank